#it kinda got away from me | Explore Tumblr Posts and Blogs

trashpandacraft · 10 months

Text

hi! ok so i'm going to talk about one of my top-five favourite things, which is: dyeing stuff! this is going to be specifically about dyeing protein fibres (animal fibres—wool, alpaca, silk, etc) in a pretty low-key way in your kitchen.

to be clear up front: this is not the most scientific, most perfectly reproducible, or most Objectively Correct way to dye things. i get a lot of fibre that i like this way, though, and i think that other people can, too.

fibre i've dyed that i think is neat:

you can also dye yarn like this:

yes, i like blue a lot. i also really like variegation and heathering, which is why most of the fibre here has patches of white—it's an intentional choice that i've made. you can make different choices.

here is what you need to dye things:

fibre, vinegar, dye, a pot, heat, and some water.

that was so you don't get overwhelmed by the impending wall of text. here is what you need to dye things (it's the same stuff!), but with way more detail:

fibre or yarn. this is the big one, obviously. i tend to dye in 100-200 gram batches, because that's approximately what fits on my stovetop easily. if you're very nervous about felting or harming your fibre, you can use stuff that's been treated to be superwash, start with yarn (which is harder to felt than fibre is), or use a felt-resistant breed like dorset or suffolk. honestly, though, i learned with merino because that's what i had, and it was fine. again, though, this guide is only for protein fibres. it will not work for things like cotton. the only exception to this is nylon, which will take on some colour, but less than a protein fibre will.

a mordant. this is a fancy way of saying a thing that makes dye stick, and for what we're doing here, it's citric acid or vinegar. your grocery store definitely has at least one of them, though if you can choose, i prefer citric acid, because i love wet wool smell but i do not always love wet wool vinegar smell.

dye. i use acid dyes, and am personally deeply loyal to dharma acid dyes, but ashford and jacquard acid dyes work the same way. if you don't want to buy dye or don't have access to it, food colouring will often work, as well, though i haven't tried this with natural food colourings and have no idea how well they'll work.

a dedicated dye pot. ok, if you're doing food dyes, you don't need this. if you're not, it's definitely best practice, though i don't know how dangerous it is not to. any large metal pot will do, but my favourite option is hotel pans, which are those huge metal pan/tray things that hold food at buffets and the like. i have a full-size one that's 15cm deep, and a half-size one that's 4cm deep. they're great because they let you lay out the fibre you're working with so you can see most of it in a single layer.

dedicated dye utensils. as before, i don't know how much of a huge deal this is. i'll be honest and admit that for several years i had a single pair of tongs that got used for all tong-requiring events, including dyeing, and i'm still alive. i suggest that you have at least a big spoon, and a big spoon and tongs are even better.

something to mix the dye in. yeah, i use empty plastic sports drink or soda bottles for this. you can be fancy and get mason jars or little squirt bottles or whatever, and if you get super into dyeing you'll want to mix up dye stocks, but that's way outside the scope of what we're doing here. i like the powerade bottles that have a little squirty mouthpiece, because it's fun to squirt dye onto things.

personal protective equipment. i think this is the part of things that freaks people out. ideally, you wear plastic gloves and a mask (yeah, like your covid masks) when you're working with dye. realistically, i almost never remember to put on gloves and just accept that my hands are going to be blue sometimes. you should wear a mask, because dye is an irritant, but the world is an imperfect place and i have wicked bad adhd and sometimes i forget. this isn't advice. i'm just being honest. you should use some kind of safety stuff. you probably won't die if you don't.

you might also want some little random bits: an old toothbrush or paintbrush, a pipe cleaner, some toothpicks, etc. this is mostly if you like speckles, or if you want very small patches of colour.

so first: there are a million ways to dye things, and i'm not convinced that any of them are objectively correct. i do what i do and it works for me. some of the things i do are the opposite of what most guides suggest, but i do them because i like the effects they create.

ok, that's all the background stuff you need. let's dye some stuff!

the number one most important thing to remember when you're dyeing is this:

you can always add more colour. you cannot take it away.

that's in fancy writing and bold because every once in a while i forget this, and every single time i end up regretting it.

here is how to dye things:

put water, citric acid (or vinegar), and fibre into a pot. add dye and heat. let cool completely. rinse the fibre in cool water, then hang to dry.

like, sure, we're going to go into way more detail, but push come to shove, if you do that, you're going to end up with dyed fibre. there are a lot of tutorials telling you that you must soak your fibre first, or you must add your citric acid this way, or hold the water at exactly this temperature, and i'm here to tell you that while any of these things can give you different results, those results aren't necessarily better.

the only way that you can totally screw this up is by accidentally felting your fibre, so before i get into the way more detail part of things, i'm going to talk about that.

how not to felt your fibre

i feel like if you've read this far, you know how things felt: wool, heat, and agitation. you may also notice that at least two of these things are required for dyeing. this can be stressful! but you don't have to be afraid of it. there's only been one time that i felted something to the point that it was unusable, and that happened because i literally fell asleep for several hours while the pot was on the stove. you can avoid doing this by simply setting an alarm—this is a good idea anyhow, because you'll want to check on your dye pot!

when you're dyeing, use the lowest heat that you can while still keeping the water at a simmer. if your stove, like mine, has one burner that's wildly unpredictable and sort of out of control, you may want to look for some sort of flame diffuser, also called a flame tamer or a simmer ring. i bought one on amazon for about fourteen dollars, and it's literally just a thick metal circle. it works fine.

you can also keep the heat low by using a pot with a thick bottom, though in my experience those are expensive, and if i had one i would be using it for soup, not wool.

avoid shocking your wool—never put room temperature wool into hot water, and never put hot wool into cold water. leave your wool in the dye bath until it's cooled completely, which for me usually means overnight.

finally, obviously you have to move the fibre around some. you'll need to peek under it in the pan, and when you're done, you have to rinse it and squish out the water. try to minimise handling, though. don't run water directly onto the fibre, don't get a wooden spoon and stir your dye pot around, don't wring the fibre dry when it's done.

you're probably never going to be perfect. i often find that i lose a gram or two of wool where fibres have grabbed onto each other, or where parts of the ends clumped up. it's not really felted, just sort of compacted, but it's not great to work with, and i'd rather lose a gram of fibre than fuss with the clumpy bits.

back to how to dye things

let's take it step by step, assuming a hundred grams of fibre.

put your pan on the stove and fill it halfway with water. add either a teaspoon of citric acid or a tablespoon of vinegar. this is going to help the dye strike, or stick to the fibre. the teaspoon/tablespoon is a guideline, but one that it's fine to exceed. adding more will help the dye strike faster, which can be useful if you're trying to create blocks of colour on your fibre. i usually err on the side of a little more than the guidelines, and just eyeball this—if you feel like the dye isn't taking well, you can add more later.

add your fibre to the pan. this is the first place you have to think about what you want the finished fibre to look like! you can put it into the pan any way you want, but i suggest trying to keep it in a relatively even layer, regardless of what that layer looks like. here are some ways to get specific effects:

if you want a gradient from one end of the fibre to the other, use a rectangular pan and lay your fibre out so that the line of it is parallel to the short sides of the pan

if you want a short, repeating gradient, use a rectangular pan and lay your fibre out so that the line of it is parallel to the long sides of the pan

if you want something that starts with very close repeats that get further apart as you go down the fibre, make an approximate spiral

if you don't want A Pattern (i usually don't) just lay things out in a single layer, more or less

here comes the next exciting part! decide if you want to let your fibre soak or not. again, doing or not doing this gives you some different effects!

soaking your fibre will mean that dye takes more evenly. if you want consistent colours, you'll want to soak.

not soaking your fibre means that the dye takes less evenly. the fibre on top will have less acid available to it, spends less time in the dye bath, and also has to actually get wet before it will start to dye. i actually love doing this, and think it affords a lot of cool opportunities to play with and layer colours.

if you're soaking, leave the fibre there until it's submerged. if not, don't.

now you're going to add dye! decision time, again.

you can add dye when the water is cold, which will give you more even dye coverage, and in my experience gives the colours more time to mix together

you can add dye when when the water is hot, which will give you less even coverage, and tends to encourage the colours to stay more delineated

probably surprising no one, i tend to heat the water first unless i'm starting with a base colour or i'm doing a two-colour gradient.

time to mix up some dye

as i mentioned earlier, i'm assuming that you're using powered acid dyes for this. if you're not, this mixing up part is technically optional—but doing it gives you way more control about how and where you place your colours, so i'm going to assume that you'll do it.

i usually mix dye in some sort of empty drink bottle. regardless of what you're using, before you add dye to anything, put some water in the bottle, wipe off the lip, put the lid on tightly, and shake the bottle vigorously. if there is any leakage at all, do not use that bottle. find a better bottle. if your bottle cap doesn't seal well or if you have an empty condiment bottle that's just a little wonky or whatever, you will get dye all over the kitchen, and your landlord will be really really mad about it, and you will regret your life choices. (if you own your kitchen, you can do whatever you want, but this isn't about you and you know it.)

so you have a bottle that seals tightly! great job. dump out the water and carefully put some dye powder into the bottle. remember earlier how i said you should be wearing a mask? this is the part where you should be wearing a mask.

i know that people are reading this and going, ok, but how much dye do i put in?

my answer is put in the amount that feels right in your heart, and don't forget the number one rule of dyeing things, which is that you can always add more colour, but you cannot take it away.

this isn't a very scientific answer. most dyes have a guideline about how much to use, expressed as a percentage of the dry weight of the fibre, which is what you use to get the whole quantity of fibre dyed evenly. for dharma dyes, it's like 1.5-2%, i think ashford is 1%, and jacquard is more like 2-4%, depending on the colour.

here is the problems with doing that in your kitchen: first, using that much dye will get you an evenly dyed piece of fibre, which—for me, at least—is basically the opposite of what i want. second, and more importantly, unless you have one of those teeny tiny scales used by jewelers and drug dealers, your kitchen scale will not weigh out such tiny quantities with any accuracy. third, if you do it like this, you really have to plan what you're doing ahead of time, because there's a point after which no more dye will bind! the fibre will be like enough thank u that's it i'm good and that'll be it, so you lose some of your ability to decide that actually, you want more green.

you can probably guess, at this point, that i don't weigh the dye. once you've done a couple batches of fibre with a given brand of dye, you'll start to get the vibes for how much you should use. if you really want a guideline, for a hundred grams of fibre, start with a quarter teaspoon of a given colour. you can add more—either more of this colour or a different one—later, as desired.

put your dye in the empty bottle, and then fill the bottle partway with hot water. the amount of water doesn't really matter here, nor does the specific temperature of the water. i usually fill about 3/4 of the way, because that way there's plenty of room for this next step, which is: wipe the lip of the bottle, recap it tightly, and then shake it up real good. the dye powder is going to dissolve into the water, and you now have a bottle of dye!

if you're going for a gradient, you might want to mix up your second colour so you can add them at (basically) the same time for more even mixing. if you're not, or if you only have one mixing bottle, you can do them one at a time.

oh my god we're finally putting dye on the fibre

are you ready? it's time!!

you have basically infinite options for how to do this, and many of them will give you different effects. here are some ideas:

pour the dye all at one side of the pan. and if you don't add anything else, your fibre will fade from the colour of the dye to the natural colour of the fibre

pour two colours, one at either side of the pan. depending on how much dye you use (and remember, you can always add more), this will give you either chunks of colour surrounded by white, or a two-colour gradient

add all the dye to unheated water and mix it gently, then let the fibre soak for a few minutes longer before turning on the heat. this will give you a fairly even colour

pour randomly all over, and you'll either end up with a tonal yarn or a heathered one, depending on how much dye you're using

add the dye to the water under the dry fibre, which will sink in and take up more dye on the bottom of the fibre than the top

if your heat wasn't on before, it should be now, and you're going to let the dye hang out in the hot but not boiling water for a while. how long? well, one of the cool things about dyeing with these dyes is that they exhaust, which means that when the dye has been sucked up by the fibre, the surrounding water will be clear. how long this takes will depend on the specific dye, how much of it you used, how much mordant you used, etc. i try to check every fifteen minutes.

reminder: if you started with room temperature water, the dye's not going to start taking until the water heats up, so don't check it after fifteen minutes and freak out that nothing has happened. it is fully normal for it to take up to an hour for the dye to exhaust. don't turn up the temperature, just give it time.

yay it worked!

at this point, you have a pot of hot water with some beautifully coloured fibre in it! but maybe it's not beautiful enough. maybe you want...more colours.

that's cool as hell and you should go for it. we mentioned two-colour gradients up there, but what if you want something else?

the answer, probably obviously, is adding more dye.

first, a caveat: while you can successfully make multicoloured gradients like this, it's more difficult than you think, and if it gets messed up—all the colours bleed into each other, say—it turns into a muddy mess. my suggestion is to stick to two (or three at most!) colour gradients until you have a much better feel for what you're doing.

let's talk about ways you can add more colour. you have two options: big colour and little colour.

big colour is going to add a lot of colour—you're going to mix up the dye and pour it just like you did before, but paying more attention to places that don't have dye yet. sometimes it's the middle of a gradient, or the white splotches from random pouring, or the half of the fibre that wasn't submerged when you started. or maybe you dyed the whole thing yellow, and now you want to add a blue gradient over top. whatever!

if you don't want to freehand pour, consider buying a couple large syringes, or a bottle with a squeezy top. these are also fun because you can easily get more colour between the laid-out fibre, or even under it.

in the pictures at the start of this post, the red-and-gold top and both yarns were dyed by adding big colour.

little colour isn't going to add big patches, but is going to add speckling, tonal depth, or smaller patches of colour. all of the blue-base fibres and the yellow-and-blue yarn were dyed like this.

if you're still reading this closely, you might have caught that i just said both yarns were dyed with big colour, and that the yellow-and-blue yarn was also dyed with little colour. these are both true! the base colours of the yarn were done to make big colour, but if you look at the full-size image, there are also a bunch of speckles. you can do whatever you want! no one can stop you!

here are some ways to add little colour:

mix up some dye, but use less water. add drops of the dye, either directly onto the fibre (more dramatic!) or in the water (tonal!)

use a toothpick to grab a little bit of dye powder and drop it into the dye bath (similar to the previous one, but a little less predictable)

put on a damn facemask. take a clean toothbrush, paintbrush, or pipecleaner, and just barely touch it to the dye powder. gently flick or tap the brush to add speckles of that colour

find a salt shaker that you're never going to use for anything but this. put citric acid, salt (to make it distribute better), and dye powder into it, and shake it up (with the holes covered, please cover the holes) to make sure they're evenly distributed. gently shake this over the fibre to add speckles, but more of them, and clustered together

put a little dye in a spray bottle and gently mist the exposed fibre, kinda glazing it with colour

another thing is that if you like a natural coloured yarn with dyed speckles, you can do any of these techniques without doing big colour first. the only thing to note when doing this is that you'll want to be very sure to spread out the fibre well, and maybe to consider dyeing one side, then very very carefully flipping it over and getting the other side.

ok, now what?

let's say that you've added all the colours that you want, and you've let your bath simmer long enough that the water is clear, or nearly clear. (if it's not, check troubleshooting, below.)

put the lid on your pan and walk away. if you don't have a lid, just walk away, but it's less dramatic.

the super frustrating part here is that the safest thing to do is wait until the water and fibre is fully cooled before you do anything else.

have i ignored this? yes

has it ever gone horribly wrong? not horribly wrong, but it's definitely caused me to lose an inch or two of roving on occasion

is it way more stressful if you don't wait? absolutely yes

honestly maybe just go to bed and deal with your fibre in the morning

so now let's say that it's morning and you slept long enough that your water and fibre are both room temperature, which often actually feels quite cool on your hands.

you have to drain your fibre. there are two ways to do this:

lift the fibre out of the water. this has the upside of not risking dumping your beautiful fibre into your sink, and not needing to maneuver a full pot of water, both of which are admirable. the downside is that wet fibre is fragile, and you'll want to be careful to support it.

dump the water out of the pan. this has the upside of minimising how much handling you're doing of the fibre, as well as (in my opinion) making rinsing easier. the downside is attempting to keep the fibre into the pot while you dump the water into the sink, and also needing to carry around a full pot of water.

secret third option: dump the fibre (and the water) into a strainer. upside: very easy, and you can keep the fibre in the strainer while you rinse, minimising both how much it needs to be handled and the weight on the fibre. downside: i never remember that this is an option until i'm already elbows-deep in acidulated water, discovering every tiny cuticle tear.

you're going to fill your dyepot with water again so that you can rinse the fibre. you want to minimise thermal shock, so keep the water temperature as close to the temperature of the fibre as you can, and don't run the water directly onto the fibre. i like to pull all the fibre to one side of the pan, and fill the pan on the other side.

side note: if you, smart person, remembered that you can use a colander, simply fill a pot with water, put the colander in the pot, and gently agitate the colander.

if you, person who is deeply relatable, did not remember you can use a colander and now have a pot with clean water and fibre, gently move your fibre in the water to encourage any excess dye and also citric acid to get out of there.

drain your fibre again, and this time, you're going to squeeze it dry. you're still trying to minimise agitation, so this isn't a 'wring it out' situation, it's a 'gently squish it between your hands and/or a hand and the side of the pot' situation.

hang your fibre to dry. remember what i was saying earlier about it being fragile? let me suggest, here, that you do not simply drape the entire length over a single hanger or something and hope for the best. if you literally have a single hanger, at least drape it back and forth a bit, but better if you can use more than one hanger, or a clothes drying rack, or that weird metal wine rack thing that came with your fridge that you've never used, or whatever.

important reminder: drip-drying things will make your floor wet! if you live somewhere very clear with no major roads or pollen nearby, you can probably dry things outside, but if you don't, you'll probably want to position the drying rack in a bath, shower, laundry area, or otherwise over something that will catch and/or absorb the water.

how long it takes for the fibre to dry is another unknowable variable. if it's warm and dry where you are, it might literally be overnight. if it's damp and cool, it can take days. the batch i posted a couple days ago literally took almost a full week to dry. spread it out as best you can, gently squeeze out the water you can, and otherwise you just have to wait.

you're done!

when it's dry, that's it, you're done! you might find that you need to pick off some little lint balls or a bit of compacted or slightly felted fibre from the tips, but other than that, you should be good to go.

like most fibre stuff, this is best maintained by handwashing in cool water. you may see a little bit of dye or colour loss the first time you wash it, which is pretty normal and nothing to worry about.

congratulations! you made it to the end of this incredibly long post, and if you followed along, you've just dyed some fibre!

troubleshooting

this isn't dyed enough! i want more colours!

add more dye! i'm not the boss of you.

this is true even after the fibre is all done and dryed. there's nothing that says you can't dye it again—you can, and i have.

some fibre seems to require more dye than others. silk, for example, dyes beautifully with acid dyes, but also needs way more dye than i expect it to.

remember that if you're dyeing something that's a wool/cotton blend, for example, the cotton isn't going to dye. the only exception is nylon, which will kinda dye, but not as dramatically. this guide will not work for plant fibres.

this is too dyed! i want fewer colours!

please refer back to the number one most important thing about dyeing, which—as you know—is: you can always add more colour, but you cannot take it away.

pull out some more fibre and try again. this has a learning curve, just like any other fibre craft.

these colours don't look like i expected!

this can be about a lot of things.

colour guides, especially if you're looking at them online, aren't always very accurate.

colour guides tend to assume that you're dyeing a single colour at the suggested dye percentage of weight, and using less than that will give paler colours.

dyes, especially if you're mixing brands, can interact with each other and behave in ways you didn't expect.

dyes can also break, which is when they split into their component colour molecules. this happens commonly with blacks and browns, food colouring, and anything that dharma trading has marked as 'advanced'. some people find this very desirable and seek it out; some people are very frustrated by it.

the ph of your water can sometimes affect your dye. i've been lucky enough that i've only lived places with lead problems, not weird ph stuff, so i haven't investigated this closely, but if you're consistently not getting the results you expect, even going for a single, solid-colour dye, look at the ph.

my dye water's not clear!

if you used a quarter teaspoon of dye and a hundred grams of fibre, and it's been, say, 45 minutes of actually hot water and your water still isn't clear, you probably didn't use enough mordant, and you should add some more citric acid or vinegar to encourage the dye to get in there and do its thing.

if you used you used more like a teaspoon of dye, or if the citric acid doesn't change anything, you used too much dye for your fibre. you can either shrug and pour it down the drain, or you can add some more fibre and dye that, too.

my rinse water's not clear!

you probably used too much dye. it's ok—just keep rinsing it, gently, until it's more or less clear.

some colours just like to run—you know how every once in a while you get a yarn and it just bleeds a little bit every time you wash it? sometimes it's just like that. i wouldn't worry about it too much.

my fibre has felty/clumpy bits!

a little bit of this is normal, especially at the ends of a fibre that felts easily (this means you, merino!)

pick off the bits that you don't like—this is generally fairly easy, and involves very minimal fibre loss. i don't bother doing it until i sit down to spin, and then just pull off bits as i come to them.

if there's a lot of felty/clumpy bits, more than you can reasonably pick out, you agitated the fibre too much. there's not much for this other than trying to card it out, which may or may not work.

sometimes this happens because your stove got weirdly aggressive and boiled your fibre. especially for wool that's prone to felting, the bubbling and jostling can be enough to encourage more clinginess than you'd like.

i want my dyeing to be reproducible!

this is kinda doable. it's a handmade thing, so it's always going to have some natural variance, but you can do it.

buy a jeweler's scale that measures in fractions of a gram.

start measuring your dye and acid, and take detailed notes about what you do.

follow those notes in the future, and you'll be probably 90% of the way there.

i want to dye with natural dyes!

i fully support this and have played around with it a little bit myself, but absolutely do not know enough about it to advise you.

the internet is very large and full of many people who are much smarter than i am, and i feel confident that at least one of them is desperate to tell you all about how to do natural dyeing.

i am, at this point, not that person.

i want to dye plant fibres!

i am begging you to find another guide, because this one will not work.

you didn't answer my question!

that's what my inbox is for

i have to reiterate that i'm just a person with real specific interests who started dyeing things because i couldn't find or afford the kinds of colourways that i wanted.

i am not a professional

i will do my best to answer questions, but sometimes the answer is 'just fuck around until you find out'

plant fi—

shhhhh

the end

thank you for reading this incredibly long post! i might make another one in the near future, either so i can show pictures or because i took out an entire section about how to choose colours and pick a colour scheme and work with colours, and i kinda want to talk more about that, but this is no joke almost six thousand words long, so i thought, you know. maybe not tonight.

anyhow, i hope that this was useful to someone! thank you for letting me talk about one of my very favourite things.

307 notes · View notes

flowercrowngods · 11 months

Text

based on this concept of steve and mike coming out to each other

🤍 also on ao3

The sun is setting in beautiful hues of pink and purple, tinging the town of Hawkins, Indiana, in a light of serenity and beauty it doesn’t really deserve. Steve’s hands are gripped tight around the steering wheel as he carefully scans the road and the houses he passes.

He almost misses the bike where it’s lying on the curb, carelessly discarded by the looks of it, and a tinge of worry shadows his frown. Worry that doesn’t quite dissipate when he spots the figure sitting on the roof, almost black against the lilac colour of the sky, but he breathes a sigh of relief. He considers grabbing the radio to let the others know he found Mike, but decides against it. Something tells him that maybe they’ll take a while. Something tells him there’s more to Will’s stunned silence and Mike’s sudden departure from where they were all hanging out at Steve’s after another successful Hellfire session.

With a sigh, Steve cuts the engine and gets out of the car, keeping his eyes on Mike the whole time — ready for him to take off again, ready to go sit a while and wait for him to come back. But Mike doesn’t move, even after he shuts the door and approaches the Wheelers’ house. He doesn’t acknowledge Steve when he pulls himself up to the roof, easier this time than the first time he did this.

There’s a snide comment in the air between them, a version of Mike that would have lashed out at him, made fun of and insulted him. But this one just sits there, hands in his lap, frown on his face, and stares ahead.

“What do you want,” he asks eventually, though it doesn’t have the kind of heat that Steve expects. He barely even sounds like a teenager. Just sort of… dejected. Steve aches for him; just a little bit.

“Just making sure you’re alright,” Steve says, shrugging, looking ahead as well so Mike doesn’t feel watched. Or seen, maybe.

Because the thing is, Steve does see him. He sees the way he looks at Will sometimes, and the way his eyes fill with something that can only be described as yearning, or aching, followed by regret and fear. Which always, always turn into anger. Into frustration. Into snide comments and rolled eyes and walls that keep getting an inch added to them each day. It’s never directed at Will, that anger, and rarely at the rest of the Party, but Steve still sees it. Gets the worst of it and takes it, because he knows something about how that feels.

He knows something about looking at someone like that, about feeling that fear, that regret, that worry that come with it. He knows something about never really daring to meet someone’s eyes for fear of what they would see.

“I’m alright,” Mike says, sounding anything but. There’s a bitterness in his voice. Frustration in the way his thumb is picking at the skin of his fingers. Confusion in the tension of his shoulders, and Steve feels like he only needs to make one wrong move, say one wrong word, make a single sound that’s off key to the melody of this moment, and Mike will jump off the roof and take off again with his bike.

So all he says, after a moment’s consideration, is, “Cool.” Like he believes him. Giving Mike room to breathe, room to pretend. He knows something about that, too.

He knows and he sees and he feels.

And suddenly he wants to say something he’s never said before, something he didn’t even get to tell Robin because she knew and saw and felt, too, taking something from him that he hasn’t yet been ready to reclaim for himself.

And maybe it’s because he sees something of himself in the way Mike holds himself, in the way he snaps at anyone willing to listen, in the way he frowns in regret and barely meets anyone’s eyes except when it’s in challenge — and, most of all, in the way he never, never meets Will’s eyes. In the way he looks away when the other boy turns to him, and in the way his eyes will snap back and take in everything about his best friend when he’s not aware of it.

Maybe it’s because the sky is pink and lilac and purple above them, allowing for a certain magic to happen, allowing for a bravery that doesn’t come easy to him; but as he sits on the roof next to Mike Wheeler, the only one of the Party he never really connected with, he closes his eyes against the breeze that catches in his hair and opens his jacket a little further, slithering beneath the fabric as if in a brief embrace, a nudge, a sign to take this leap, and takes a deep breath.

His heart is picking up its pace inside his chest, taking this leap along wit him, and pulls up one of his legs to wrap his hands around it — just to have something to hold onto.

He opens his mouth once, twice, three times, but the words never really come out. They don’t know how, and he’s beginning to tremble a little with it, tension building in his chest where the words are still locked away, hidden among layers of truth.

Mike looks over with a frown and eyes him warily. It makes Steve want to laugh, this sudden change of pace, but he just keeps staring ahead; even when Mike asks, “Are you alright?”

“Yeah,” Steve says. And then then dam is broken and breaking further, and with another deep breath, still not meeting Mike’s eyes, instead focusing on the tree tops in the distance that shine in hues of purple, he finally says, “I’m kind of dating Eddie Munson.”

And just like that, it’s out. He’s out.

He doesn’t know if the world still spins, if time still passes, if he still breathes, because for a moment there is only silence. Mike stops picking at the skin of his fingers, Steve stops trembling, and neither of them moves.

It’s both anticlimactic and momentous, this silence between them when their eyes meet. When the words unfold and grow wings, when Mike understands, his eyes growing big with something that Steve can’t quite read with how tense he is despite his best efforts.

The silence stretches between them, surpassing comfort and overstaying its welcome, and suddenly it’s Steve who feels like he’s about to take off if Mike so much as twitches his brows.

“You… What?”

Forget it, Steve wants to say. Nothing.

But also, I’m in love with Eddie Munson. And I used to be in love with Nancy. And that’s okay. Both of that, it’s okay.

He ends up repeating his words, though, because they know what it’s like to be spoken now. “Eddie. I’m kind of dating Eddie.”

“But…” It’s Mike now whose mouth is opening and closing without saying anything. Mike who’s blinking, trembling a little, twitching, picking at his skin again, moving further along his hand this time to pinch the skin between his thumb and pointer finger. Steve almost reaches out to stop him, but he doesn’t really dare to.

“But?” he prompts after a while, not quite comfortable with this loaded kind of silence.

“Eddie’s a boy.”

But Tammy Thompson is a girl.

“I know,” Steve says, his tone carefully neutral, wanting to see, to wait where Mike takes this, to hear what’s on his mind, to watch the wheels turn and the gears shift. He feels awfully raw and open, vulnerable with someone who hasn’t been treating that with care yet. But there’s something about this moment that feels bigger than his own fears, bigger than the light nausea settling in his gut; far more important than the way he wants to run and hide, away from the scrutiny.

“And…” Mike continues, still battling the words inside his head. Steve wonders if there are too many or none at all. “But you… You loved Nancy.”

Ah. Smart boy. “I did,” Steve says with a small smile. “And it was never a lie. But I found that… Yeah, I can kinda like boys, too, y’know? And that’s, like, okay.”

A beat. A frown. A confused, hopeful, small, “It is?”

Steve just nods, smiling in reassurance and relief at equal measures. Silence settles once more, now that the sky has darkened into a deeper, darker blue; but it’s not as loaded this time, not as tense. It’s an invitation. An offering. A promise of I’m here, I’m with you, you can take as long as you need. To get down from the roof, to come back, to come out of wherever you think you need to hide from the world.

Mike takes it. He stays, pulling up his leg, too, mirroring Steve’s pose and staring ahead, but not as far away. He seems alert, seems to be thinking rather than dwelling, seems to be gearing up for something. Steve watches and sees and knows, remaining patient beside him, his chin resting on his knee as Mike learns to deal with this new world that has been presented to him. This new world that comes with opportunities and chances and possibilities that are scary and big and difficult to make.

“Y’know,” Mike starts at last, interrupting the silence, playing with it, his voice hushed and quiet to keep it from disappearing completely. “Lucas, when he had that championship game? He told us, Dustin and me, that we didn’t have to be the losers this time. The nerds. The outcasts. Different. And all I wanted was to scream at him, because…”

Mike swallows his words, keeping them from tumbling out of his mouth, and Steve aches for him again. He wants to reach out, wants to say it’s okay, tell him it’s alright, to take his time. But he waits in silence, lets Mike find the bravery he needs on his own, and waits.

“Because how could he say that, you know? How could he, when… Will wasn’t there. And all I did, all I ever did anymore, was miss him. And I loved El, I knew I did. And she was gone, too, but…”

He trails off again, and this time Steve picks it up. To let him know he’s not alone. To let Mike know he understands what he’s saying. He understands. “But she’s not Will. You needed Will.”

“But I shouldn’t!” Mike explodes suddenly, riled up because Steve adds fuel to the fire, because Steve has that same fire, too; and because they are so, so similar when they want to be. “And now he’s back and it should be fine, I shouldn’t be feeling like this, it doesn’t even make sense! How can I…”

Steve looks at him, at his expression that is nothing but lost — completely and utterly. He’s seen it on the bathroom floor at the mall; high out of his mind as he was, he’ll never forget the way Robin looked at him, the sheer crestfallen expression. All that confusion, all that fear and frustration and, in the end, resignation. He’s seen it in the mirror, and he’s seen it in those pretty brown eyes that he just can’t get out of his head anymore.

He offers, gently, “How can you need him when he’s right there? How can you love him when a year ago you loved El?”

And Mike just looks at him before he deflates completely, his shoulders falling along with his face. He nods. Shrugs. Looks away and hides his face behind his leg.

Steve sighs softly, watching the boy and speaking the words he wants to say the sixteen year-old version of himself. “I don’t know,” he says truthfully. “I really don’t, and it sucks sometimes, having this need to, like, decide. Or understand. Or stop and be like the rest of them.” Like Robin and Eddie, or like the rest of the world. “But I like to think, sometimes, that maybe it’s a good thing. That there’s just… I don’t know, it sounds corny as hell, but like, there’s just so much love to give, we can’t even stick to only boys or girls, y’know.”

“That does sound real corny as fuck, man,” Mike says, and back is that long suffering tone of his, back is that eye roll and the twitching elbow, ready to nudge Steve in the side. It’s still tinged with that vulnerability, not quite Mike yet, but it’s an offering.

One of many tonight, it seems.

Steve grins, a bit lopsided and raw, shoving Mike gently as he remembers something he overheard once. “Sorry, mister Heart of our group, but I don’t think you have any leg to stand on here.”

That makes Mike freeze, though, and he stares at Steve wide-eyed; caught. Exposed. Reminded.

“What did you say?”

“Uh,” Steve falters, not sure where he went wrong — or if he went wrong at all. “I overheard Will calling you that, talking about you to, uhm. Someone. I don’t know. Why, what’s— What’s wrong?”

“Nothing,” Mike says, way too quickly, pulling away again with everything he has, hiding behind those walls once more, and Steve feels whiplash from it.

“Mike,” he says, his voice quiet and gentle as he turns to face him completely.

“No.”

“It’s okay,” Steve says. Promises, as much as he can.

“Shut up!”

“You’re not wrong or bad or broken. It’s okay, you’re okay.”

“I said, shut up, Steve.”

“You should see the way he looks at you, too. You should go talk to him. You—“

Mike lashes out, finally coming out from behind those walls again, only to shove at Steve, to push him away — hard enough for him to lose his balance and almost fall off the roof, clenching one hand on the edge, the other in the rainwater gutter with a bitten-off curse.

“Shit, I’m sorry!” Mike reaches for him immediately, snapping out of whatever anger Steve caused, and pulling him back until he’s safe again, apologising over and over, dead to Steve’s promises that it’s alright. “Fuck, I’m so sorry, Steve, I’m so—“

He pulls Mike against his chest, finally reaching out to hold the boy who always pushes people away when they get too close — quite literally, too.

But he doesn’t shove this time, doesn’t move out of Steve’s grasp as the mumbled apologies become heaving sobs.

“It’s okay, you’re okay, you’re so okay, Mike,” Steve tells him over and over as he holds him. The sky above is almost black now and Steve lets Mike cry into his chest.

It takes a while for Mike to calm down, but Steve just holds him through it, ready to let go whenever Mike wants to pull back and snap out of it again — but he never does, and Steve feels a certain kind of affection for the boy that is usually reserved for Lucas or Dustin.

At last, when he’s calmed down, Mike pulls back a little. “Do you really… Does it… Is it really okay?”

Can it be okay? Can I really like both? Is that not just me, being broken and wrong and bad? Will I get the chance to not be alone?

Steve swallows hard, and his voice is hoarse when he says, “Yeah. It’s really okay. ‘N’ I’m with you, yeah? If someone gives you shit for it. Or if you need a reminder.”

And Mike — puffy eyed, snotty nosed, so, so young — looks at him with those trusting eyes and nods, like he believes Steve. Like he trusts him. Like he hopes.

“Just don’t fucking shove me off your roof again.”

Ans just like that, the spell is broken, the tension is lifted, and silence has left them, as Mike almost chokes on a laugh and shoves at him again, lightly this time, before jumping off the roof so Steve can’t retaliate.

“Asshole,” he mutters, shaking his head as he, too, jumps off the roof, dusting off his pants as he watches Mike grabbing his bike. “Hey, Micycle,” he calls, cackling when Mike flips him the bird. “You want a ride back?”

Mike stops, considering as Steve casually flicks his keys into the air and catches them expertly. “What kinda music do you got?”

“The Clash, ‘cause Eddie hates them.”

“Yeah, that’s because they suck!”

Steve snorts, opening the driver’s side door. “Y’know, they’re one of Will’s favourites, actually.”

He watches Mike freeze with a grin on his face, knowing there’s no way the boy would take the bike.

“You’re so annoying,” Mike sighs as he brings his bike close to the garage and carefully lays it on the grass this time before hurrying over to Steve, getting in on the front, rolling his eyes when Steve cackles. “I don’t know why Eddie would date you—“

His words are drowned out when Steve turns up Train in Vain, drumming along on the steering wheel with a shit eating grin. Though the atmosphere is wildly different now, the spell broken and the bubble burst, it’s undeniable that something happened between them. Something big, something important.

Something that makes Mike’s annoyed, long-suffering expression be broken by the smile he’s trying to hide. It makes Steve laugh, elated and feeling something that’s much, much bigger than he himself ever could be.

It’s going to be okay. So, so okay.

Before they know it, they’re pulling up to Steve’s and he turns off the car, is about to get out when Mike makes him still again.

“Hey, Steve?”

“Hm?”

“I think it’s cool. You and Eddie.”

He smiles, relief and fondness washing over him. “Yeah?��

“Yeah.”

“Thanks.” He reaches over and ruffles Mike’s hair — a wild mane these days, but they could make it work with some care and some products. “Now go get your man, lover boy.”

“God, you suck so much, you’re so annoying!”

Steve’s cackling again when the passenger door slams shut and Mike lets himself into his house.

He spots a figure in the dark, their face lighting up when they take a drag of a cigarette — and Steve’s heart stumbles in his chest. He scrambles to get out, attempting to look calm and collected, even though Eddie always manages to see right through him.

“Hello, stranger,” he says, leaning against the wall beside Eddie, hiding away in the dark, where the world won’t see their shoulders touch, or their fingers tentatively playing with each other before they can’t take it no longer and lace their hands, holding on tight.

“Hi,” Eddie breathes. “How’d it go?”

“Fine, I think. But, uhm… I told him. About me. About us. That, uh. That okay?”

Even in the dark, Steve can feel eyes on him, but he just stares ahead, opting instead to give his warm hand a squeeze. He smiles when Eddie’s thumb begins to draw patterns on his palm.

“Hmm. Very. You think they’ll be okay?”

“Yeah,” Steve breathes, stealing Eddie’s cigarette from his mouth and pulling it between his own lips. “Yeah, I think they will be.”

#steve & mike #steve harrington #mike wheeler #steddie #byler #pre-relationship byler #real hesitant to use the pairing tags tho 🥺😭#this kinda ran away from me i feel like i’m gonna have to try again with better words but here’s what i got for a first try #i write this whole 3.2k words thing tonight it is 2am i should proofread this but i have a lecture early in the morning i get 5h of sleep #(but only if i fall asleep right this instant which. ain’t happening chief. anyway uh depression era words?#dio words #and yes the bisexual light of this whole scene is important thanks for asking

1K notes · View notes