#stenograph | Explore Tumblr Posts and Blogs

munchlax-musings · 1 year

Text

About My Stenograph Machine

I thought I'd share some information on the equipment I use for stenography.

This is a very long post with several images (with image descriptions), technical explanations, and two videos attached. Thank you for reading, if you do!

I learned a lot about my machine after delving into the manual and trying to explain what I read, so I hope you do, too.

Note that while I am heavily biased towards stenograph machines, there are hobbyist keyboards made for steno that are much cheaper and readily accessible. If you would like to learn more, please click this link.

This is a Stentura 400SRT.

It's an older electric stenograph machine model, refurbished for student use.

[Image description: Photo of an electric Stenograph Stentura 400SRT Paperless Student Writer. The Stenoworks logo watermark is at the bottom left of the image. At the top of the machine are the black Platen Roller and the Paper Feed Roller. Below that is the cover/nameplate. An on/off switch and two indicator lights are at the top right of the nameplate. The first is green. Its label is to the left: a long line, with five dashes below it. Below the green indicator is a red indicator. Its label, to the left, reads: "DATA TRAN". Below the lights and switch are the words: Stentura 400SRT electric. Below that, the word Stenograph. Directly below the nameplate, on the left and right, are two horizontal Cover Release Levers. Even further below is the Stentura keyboard. At the top is a long bar called the number bar. Below that are 22 keys. At the lower left of this image is the Stenoworks watermark.]

It plugs into an outlet to keep power, has a removable battery, and uses a serial to USB adapter cable to connect to my computer. It's pretty old but sturdy and quite reliable.

The Front of the Machine

The cover of the machine, also called the nameplate, can be lifted up for further inspection and maintenance of the internal mechanisms. It also has a power switch and two indicator lights, one in green and one in red. Both flash or light up when set to different modes. If you wish to know more about the machine's various modes, please click this link to read the manual.

Below the cover are the keys of the machine.

Stenograph machines do not have the keys labeled in any way. This is to prevent writers from looking down at their hands when writing. Looking down at your hands while writing will ultimately slow you down, preventing you from reaching high speeds. This is sorta like how touch-typing is considered a faster way to type than looking down at your keyboard.

I will write a post summarizing the keys of the machine at some other point. Just know that each key doesn't represent individual letters but instead sounds, and that each stenograph machine has 22 keys plus a number bar. The keys at the far left and the middle of the machine are actually each one key, just with the appearance of being split in half.

The Bottom of the Machine

This part is not pictured, unfortunately. This is the area where you would install your external battery pack and your tripod.

[Image description: Photo of a stenograph machine tripod.]

Above is an example of a tripod. The underside of the machine has a hole for attachment. This lets you write with the machine between your legs rather than with it sitting on a desk.

My model also has a wire bar at the bottom used for writing at a desk or table while standing called the "Bench Conference Stand". This is typically used for bench conferences, wherein the plaintiff and defendants' team will speak with the judge but exclude the jury and anyone else besides the court reporter from overhearing.

The Paper Tape Mechanism

Pictured below, the top of the machine isn't something I personally use. According to the manual, the silver bar and attached lined roller are called the "Paper Feed Roller" and the black roller it's grazing is called the black "Platen Roller". You might have already guess it, but this mechanism is used to print ink on what is called "paper tape".

[Image description: Close-up of the top of the Stentura. Middle of the image is the black Platen Roller and the Paper Feed Roller.]

Paper tape is just a very long sheet of paper you would use, before the task was automated using computers, to record your stenography notes. Stenographers would typically read directly from the paper in order to prepare transcripts or when asked to repeat, in verbatim, something that had been said in court.

[Image description: Photo of the back of the Stentura. Top, centermost part of the machine are the Paper Feed Roller, Platen Roller, and the paper apron. Below that is where you would, presumably, attach the paper tray. Bottom left of the machine is the 9-pin Communications port. On the bottom right, a hole for plugging your machine into an outlet. The Stenoworks website watermark is at the bottom left of the image.]

The above is a photo of the back of the machine. Underneath the paper feed roller is a barely visible silver landing strip called a silver apron.

On the bottom left is a 9-pin Communications port. You use that to connect the writer to your computer.

Then to the far right is a hole for connecting your machine into a power outlet.

In case you're curious as to how add paper tape to a stenograph machine, below are the steps:

Attach a paper tray to the back of your machine

Add paper to the tray

Take the top-most fold

Thread the paper between the black roller and the silver apron

Roll the black roller to "feed" the paper tape into it

When the paper comes up through the top of the roller, lift up the silver paper feed roller

Place the end of the paper coming up through the top underneath the paper feed roller

Pull the paper out a few inches

Place the top of the paper tray beneath the paper

For a video representation of these steps, below is someone adding tape to their own machine:

youtube

[Video description: A stenographer giving instructions and demonstrating how to load paper tape into their stenograph machine.]

Each depression of the keys, called a stroke, would print a letter or group of letters onto the tape. Below is what the paper tape's printout would look like using Plover's paper tape plug-in. The chords here spell out "hello world".

[Image description: Screenshot of the Plover paper tape plug-in. Top of the window has the Plover icon, which is a white asterisk on a green key. The window name is "Plover: Paper Tape". To the far right of the window name are the help (?) and cancel/exit (X) buttons. Below the window name is a drop-down menu labeled "Mode:". "Paper" mode has been selected. Below that is a line of the keys from the machine. The keys are: # S T K P W H R A O * E U F R P B L G T S D Z. Below that, in a white text box, are the following chords: H E L, O E, and W O R L D, each set on separate lines. At the very bottom of the window are four icons: a push-pin for pinning the window above other windows; a button with a capital and lowercase T for editing the font appearance; a garbage can for deleting what is on the paper tape; and a floppy disk for saving what you've written to the tape as a text file.]

The Longest Section: Inside the Machine

Below is an image of the internals of the stenograph machine.

[Image description: A photo of the inside of a Stentura 400SRT. All the parts that I could identify are labeled with a number. The parts are numbered from 1 to 17 in black text on top a black circle with a white outline. The Stenoworks website watermark is in the bottom left of the image.]

All the parts that I could identify with the manual are labeled with a number. After trying to write the image description for it, I decided that I should provide the names for each part below, then separately explain what each part is or does.

Parts Labeled

Cover Release Levers

key levers

blue Ribbon Advance knob

an unpictured red knob called the Depth of Stroke knob

an empty space where the Ribbon Cartridge would be installed when using paper tape

white Keystroke Pressure knob

green strip overlay with key adjustment screws

number bar lever

black Paten Roller

orange Platen Drive Gear

Platen Bearings

Manual Platen Advance Linkage

silver Paper Feed Roller

red Electric/Manual mode lever

machine handles

Cover/nameplate

An Explanation of Each Part

The first two things labeled in the image are the Cover Release Levers. You lift those horizontal bars/levers to release the cover and lift it up to reveal what's underneath. Then there are what I presume are just called the key levers.

Following that is the blue Ribbon Advance knob.

From what I understand after fiddling with the machine, each key depression and release causes this blue knob to automatically advance number 5, the ribbon cartridge, which typically contains a self-inking, continuous loop ribbon. This ensures the machine will continue to apply ink to the paper tape with every rotation.

Not pictured is a red knob called the Depth of Stroke knob.

You turn the wheel upward or downward to adjust how far down the keys go when you press them. There are ten settings available. Adjustment also lets you decrease or increase spacing.

To the far right of the blue Ribbon Advance knob is number 6, the white Keystroke Pressure knob.

Turning it lets you adjust the amount of pressure needed to press the keys.

Above where the ribbon cartridge would be, I think, is number 7, the key contact assembly.

The green overlay strip has all the keys of the machine labeled with corresponding screws above each one, called contact adjustment screws.

The number bar's screw is to the top-right of the others. The two big screws on either side are for removing the overlay.

You would insert a 0.35 inch Allen wrench into a screw. Then you would turn it after determining that the corresponding key's switch is in need of adjustment.

Immediately above the green overlay is number 8, the machine's number bar's lever used for printing numbers into the paper tape.

Above that is number 9, the black Platen Roller.

To the left is number 10, an orange knob called the Platen Drive Gear.

On either side of the Platen Roller are number 11, the Platen Bearings. They are a single frame, identifiable by the holes located at the center of each side. Those holes are specifically for lube.

Number 12 is the Manual Platen Advance Linkage, which is to the bottom-right of the Platen Roller. Above the Platen Roller is number 13, the Paper Feed Roller. Below that, not pictured, is the silver paper apron.

All these parts work in tandem to smoothly apply ink to the paper tape when a key is depressed, and then to advance the paper to the next available line when a key is released.

If you were using the Stentura with paper tape and an ink cartridge, you would also have to apply StenoLube1 to the Platen Bearings and Platen Drive Gear, and StenoLube2 to the Paper Feed Roller.

To the right of the Platen Roller is number 14, the red Electric/Manual lever.

You would typically change from one mode to the next when either trying to make adjustments to the machine's keys or when your machine is running low on battery and you have to switch to writing on the paper tape.

Number 15 looks like it's labeling two empty areas, but those are the handles for the machine. And of course, above all of these parts is number 16, the lifted cover/nameplate.

Keystroke Emulation

As you can see, each stenograph machine is a lever-based machine, just like a typewriter. Each key on the machine connects to an electronic switch.

After completing a stroke, the machine will send that input through the real-time cable connected to your computer. Software -- Plover or CAT (Computer-Aided Transcription) -- will emulate that stroke and translate it from shorthand into something else, presumably English or a command, using a dictionary.

Above is a screenshot of the Plover Dictionary Editor. You can filter by strokes or by translations. You use this pop-up to edit, add, or delete strokes from the dictionary. All Plover users are given a pre-named dictionary called "user.json".

Rather than editing the "main.json" dictionary, which is a free user-created dictionary distributed through downloading the program, you would typically make changes to other dictionaries, especially user.json. This is to ensure that if Plover were to be updated even if your main.json were to be accidentally overwritten, you would not lose your dictionary changes.

Production of a Chord

Below is an attempt I made on December 25th, 2022, to write the top 100 English words using a metronome set to 140 bpm.

The bottom right corner of the video shows the digital paper tape emulated by Plover. Each stroke is then translated into English, as demonstrated by my completion of the drill at the center of the video.

youtube

[Video description: A video of my screen as I write to a Top 100 English Words drill on the website Stenojig. It begins with me setting a metronome to 140 bpm with stress on the 2nd of the 2 beats. In the top right is a WPM plug-in measuring my speed; on the lower right is a plug-in displaying emulated paper tape. Soon after setting the metronome, I switch tabs to Stenojig and begin the exercise. Green highlight indicates whether I've written a word correctly. And the end of the video are a set of stats indicating that I did not erase anything during the practice session, I averaged 2.15 strokes per second, and that it took me 0:47 seconds to finish the exercise, giving me an approximated WPM of 114. Then the video ends.]

#stenography #steno #open steno project #plover #education #court reporting #stentura #stenograph #stenographer #transcription #studyblr #accessibility #keyboarding #infodump #steno resources #long post #munchlax's musings

19 notes · View notes

orbmanson7 · 9 months

Text

Why Logan is Trapped by the Narrative: A Quick Analysis on the Effects of Thomas' Black-and-White Thinking

Why is Logan so caught up on not being seen as a joke?

Why does he care so much about what Thomas and the others think of him?

Can't he just be Logic without having to deny he has feelings, without constantly filling only the roles of exposition in the show and the voice of reason for Thomas?

Well, here's the thing: Logan is trapped by the narrative.

Thomas' perception of the narrative, to be exact.

Think of it this way - you know how so many people argue that we can't have a female president in the US because she would somehow be "too emotional" to handle the position properly?

While complete nonsense (at least in comparison to plenty of emotional decisions men can make, too), the point is that people see the role of a president as someone who is calm, collected, and in control. They know that person will have to make very important decisions, so it's believed they need to be someone who is informed and level-headed.

Similarly, if you were to hire a lawyer, only for that lawyer to constantly get angry and loud and scream at people when someone argued with them, would you trust them to be able to do their job properly?

If you went to the doctor, only for your doctor to cry and sob with empathy for you, only offering up niceties and positive words instead of factual information to improve your situation, would you ever go back to such a doctor or trust them to help anyone?

People perceive certain jobs and roles in very specific ways.

It's not that a lawyer can't get emotional, but they need to understand how to keep their calm when they are doing their job. It's not that a doctor can't have empathy and care about their patients, but they need to not let it interfere with their work.

People tend to see the world as more black and white than it actually is. We perceive people for their roles, not as the multi-faceted folks that they truly are.

Just because you see a coworker who's always quiet and reserved doesn't mean they are like that when they go home. Just because your teacher is strict and quick to find faults doesn't mean they are like that when they're on vacation.

Often, people think someone can only be one or the other, not varying shades of both and more. But even people we know very well can have aspects that we don't know or understand.

Logan exists within shades of gray, removed from those arbitrary constructs society holds but still required to operate within them because of Thomas.

This is why he has to insist on being heard, being taken seriously, not making mistakes.

Because everything relies on Thomas' perception of him.

If Thomas doesn't find Logan reliable? He won't be reliable.

If Thomas doesn't trust him when he tells him the truth? He won't be trustworthy.

If Thomas thinks Logan is wrong about something? Then Logan will be wrong.

It all comes down to how Thomas' mind perceives everything, and Logan is always, always torturously aware of that fact. Thomas is human. He has a lot of black-and-white thinking that he hasn't challenged just yet.

It's because of this that Logan knows he can't mess up, because then Thomas will see those mistakes as him. He will be identified in that way.

We see this with the other sides a lot, too, by the way.

Patton isn't taking seriously even when he has good suggestions because he's always telling jokes and relying on feelings. But Morality is something important that should be listened to and taken seriously at times, as it's meant to guide your actions.

Roman is reprimanded a lot for arguing and yelling at others, but he is constantly fueled by passion. He's built to stand up for what he believes in, even if he's wrong or making an impulsive decision in the moment! Tampering down that passion would prevent him from expressing the Creativity that he embodies!

Virgil's entire role is to scare Thomas into not doing things that could potentially hurt him, so Thomas perceived him as scary and villainous for a very long time. But without it, Thomas could easily get hurt!

The same can be said for Janus and Remus, too. They initially come off as villainous, bad, and evil, despite their actual purpose and intentions, only because Thomas has perceived them and their roles in that way.

Logan cannot make mistakes because then he'll be seen as unreliable or wrong. He can't display emotions because then he'll be seen as emotional, compromised and unable to make unbiased decisions. He can't be seen as a joke or not taken seriously, because then Thomas' perception of him as a voice of reason, as someone with valuable knowledge, as someone he can always trust to tell him the truth...that will all be gone. It will warp Logan into something that he's not, so he has to maintain those rigid guidelines as much as absolutely possible to remain in his position.

Does this mean Logan really can have emotions? Can he enjoy silly activities or a good joke? Yes, of course he can.

But it needs to be kept separate from his role as Thomas' logic.

And this is where the issue arises. Because Thomas wants his sides to constantly act as their own characters, this puts a lot of spotlight on Logan even when he is in private. He can't be perceived at any time as someone Thomas can't trust or rely on, so his role as Logic invades the other part of his existence, too.

If a lawyer was stoic and formal even at home with their family, their family would probably find them odd, and the lawyer would probably feel stressed about being completely unable to ever unwind.

If a doctor could not show empathy even to their own children, relying only on facts, unable to comfort them because their coworkers could see their every move and they couldn't risk being seen as emotional for even a moment, the doctor would likely have a very stilted relationship with their kids, unable to connect with them in the way they want.

For Logan, he has to remain a reliable, unbiased, unfeeling Logic at all times because he is constantly being perceived as such.

Because it's all about who's watching and what's expected to be seen.

Logan wants to be more than his role as Logic, more than what is expected of him. But he knows the consequences of him trying to do so could harm Thomas in the long run, leaving him without a much-needed voice of reason.

So he's not going to let that happen, even if that means he has to hide away all the parts of 'Logan' that don't quite fit what Thomas expects of him.

Because Thomas needs him to be Logic a hell of a lot more than he needs him to be Logan.

#logan sanders #ts logan #sanders sides analysis #logan angst #sanders sides #back at it again #the first month at my second job the stenographer one i was awkward around lawyers bc they were always so formal #until one day we were all just talking after work and my brain remembered that it was just a formal job and people arent always like that #and of course i immediately went oh hey its just like logan #better go home and write some angst about that #so here you can have this now haha #orbs thought bubbles #long post

194 notes · View notes