#nickel scrap metal | Explore Tumblr Posts and Blogs

artingabout · 4 months

Text

Boromir's bracers from The Fellowship of the Ring

Behind the scenes:

This was my first venture into real leatherworking so there are a lot of basics included in the materials list, but now that I have them, I won't run out for a while :)

My materials:

2mm thick scrap leather

a full basic leatherworking tool kit including metal thimble, skiving knife, edge-trimmers, diamond punches and burnishing tools

leather needles

waxed thread

swivel knife for cutting the pattern in

rubber mallet

cutting boards

leather dye and scrap cloth for applying it

sewing pony

contact adhesive

four buckles

nickel studs

I'd made the bracers before, 10 years ago, for a costume party but had made them out of craft foam because lack of time/space/money for leather-working.

Since I had some time to kill over the holidays, I decided it was time to give things a go. First stage was redrawing my original pattern then cutting the leather to shape/size:

Next up was marking out the patterns onto the main body of the leather. Lessons have been learned. I foolishly decided to freehand it. It still looks nice, but now I know how I could have done it better.

Once both sets of patterns were down, I tooled the leather with the swivel knife. Learned very quickly that I should have got a slightly thicker leather to make the pattern stand out more, but for a first attempt, very happy.

Punched the main stitching holes and then did the staining to get the red-brown colouring. Took a couple of layers and several attempts to get to the right and consistent shade.

Once the dye dried overnight, burnished the edges of the smaller piece to make them smooth and shiny, then attached the two sections together with contact adhesive and started the stitching (ow my fingies)

The trickiest part of the whole thing was adding the buckles and trying to work out the best length for both of them, taking into account that the bracers are meant to be worn on top of several layers, including a quilted arm-guard.

Thankfully, I found a lovely batch of buckles that also had the pin on a separate rod from the rod that the buckle loop went around, which simplified putting it all together. I've done buckles before, but never with material this thick.

Once the straps were on, fastened with stud and stitching, it was just a matter of giving the entire thing a polish with beeswax to give it a smooth sheen all over and then adding the silver details. I did attempt foil, but it ended badly, so I switched to silver paint instead.

My Boromir-by-installments is coming together, little by little :)

#leatherwork #leather #lord of the rings #boromir #arting about

53 notes · View notes

eating-the-inedible · 1 year

Text

Here is a list of the inedibles that will be in this bracket

Lava

Orbeez

Orange Joe (fictional "beverage" that's a combination of orange juice and coffee)

Doll shoes

Dirt

Pen caps

Mercury

Watermelon tourmaline

Comet/scouring powder

Moss

Paper towels

Play-Doh

Drywall

Marbles

DVD

Dice

Kinetic Sand

Coins

Fiberglass insulation

3DS Stylus

Plastic Bottle Cap

Chapstick

Babybell Cheese Wax

Paper

Bouncy ball

Human meat

Venus (planet)

Cascade dishwasher pods

Acrylic Paint

Magnets

Molten glass

Pens

Sea glass

Silica gel packet

Leaves

Cocoa butter lotion

Antifreeze

Pencil Toppers, the lil eraser things

Sand

Tumbled amethyst

Rubber Ducks

The rubber balls from the game Cranium Cariboo

Polly pocket clothes

Poison Dart Frog

Snow

0.1 uF Film Capacitor

The sun

Metal

Eraser

Tide pods

Phone charger wire

Those free wooden pencils you get at ikea (just the wood shell not the lead)

Liquid nitrogen

Aquarium gravel

the weird science juice in the beakers in those stock images

Origami star

Styrofoam cup

Sticky note

Collar of shirt

This submission form

Plastic straws

Glow sticks

Oil paintings

Candle wax

Glass

Nickel sulfate solution/Nickel plating solution

Silicone wristbands

Seatbelt

The wax paper under your Poutine

Forearm (doesn't have to be one's own)

Asbestos

Candy wrapper

“Okay so technically this is edible but I’ve had urges to just take a huge bite out of certain sea creatures before. Like just a chunk from an orca or dolphin or great white or seal, etc.”

“Those stupid wooden spoons”

Furbies

Scotch tape

Artificial grapes (the wax/plastic ones for display)

phone

THE FLESH OF MY ENEMIES

Crystals

Fire

The goo inside Stretch Armstrong

Headphone wire

Raw steak

Art

Small colorful rubber bands

Tinfoil

Pencil lead

Cattails (the plant)

Foamy soap

Liquid soap

Bar soap

Flourite

Shiny rocks

Grass

A hunk of random fish swimming by

A live goldfish

Toothpaste

Styrofoam

Price Tag Fasteners

The moon

Pool noodles

Smol frog

Destroying angel mushroom

the smoke coming out of the grain refineries two Mike's out of Gary, Indiana, Usa

Popsicle sticks

Cardboard

My hat

The tiny rocks in school playgrounds

Gasoline

Blue laundry detergent

Spray foam insulation

Battery corrosion

Fiber optic cables

Packing peanuts

Your mother

Pond water

Dry ice

Alkali metals

Chocolate shampoo

Ping pong ball

Bricks, like the stuff you'd build with. Minecraft bricks even, if you want

Hoodie drawstrings

Horse treats

Chalk

Copper (II) Sulphate Water / Blue Science Rock + Blue Science Juice

Ink

Floam

Fabric Paint

Oil paint

that one art piece of the banana taped to the wall

the hotdog somebody encased in resin

“the thin lego plates not the base plates but like the lego piece thats like 2x8 and they kinda look like hershey chocolate bar pieces”

One of those little hamsters

Model magic

Battery Acid (the drink)

manchineel apple

Rubber band ball

The lava lamp liquid

Blood

Rosin

Wax apples

That cake decoration that came with your slice and you're like 90% sure it's not edible... but what if ?

Soap bubble

Lush cosmetics' products

Plushies

Strawberry Shortcake's dolls with scented hair

Wood

Glue

Salt lamp

People who think children are not worth their consideration

Tarmac

Shampoo

Pennies

Poisonous berries

Chunky soft yarn

Crayons

Rock

“whatever the Chuck E Cheese Ticket Muncher Machine is eating (it's not the tickets) (or the sound itself but that's neither a solid nor a liquid so this is just kind of holding hands with the hypothetical ticket muncher food)”

Snow globe liquid

Chisel tip whiteboard marker

Raw dough

Raw fuckin cactus. alive

Grape agate

Car seat

Succulents

Keys

Lock pick

Scrub daddy

Molten sugar

Allergens

Lightning bolts

“Bark dust. Like the dirt/bark dust that's under the bark chips on a playground. Not the chips themselves. The dust.”

Clear deodorant

Apple earbud wires

Eggshells

Squinkies

Hello kitty sweatshirt zipper

Preshredded mozzarella cheese

Scrap metal

Rose

All of the rocks at a crystal shop

Origami polyhedron model

Bubbles mixture

Cupcake liners

Hair gel

Curtain rods

Incense sticks

Incense cones

Metal thing that attaches eraser to pencil

Windshield wiper fluid

Plastic pencil grips

Wooden ice cream spoon

Book

Tree

The liquid in levels

Vanilla extract

Aroace flag

Coil incense

California state testing “next question” button

Spackle

Forbidden coal iron french fries

Garage doors that look like chocolate bars

Plastic takeout box

Velvet

Weird anime girl hair

Freezable gel ice pack

Clouds

Necklace chains

Nail polish

Pencil Shavings

Pool floats

Bao Dumpling

Spray deodorant

0.1 uF Ceramic Capacitor

Vanillish (Pokémon)

Fondant

Really fancy pillars

Computers

Favorite song

Tumblr

“THE LITTLE ORBS IN THE MOUSE (aka trackballs)”

“Any cutesy anime character like Chopper or Pikachu”

Wooden fan blades

Balsa wood sticks

Those blankets that look like tortillas

Microwave

Milk and golden honey softsoap

Batteries

1x2 lego pieces

Light bulbs

Slightly melted lounge chair

Cork (the material)

Pineapple coke

Fingernails

Sparkly lipgloss

Race Car Tire Marble

Gold trophies

Konjac sponge

Shirt

Mandy the Slayer / Orange Spyderco Dragonfly Knife

Malachite

Heater

Glasses Temples

Typewriter keys

EVA foam

Airplane

Sword

Crumbs in the couch

Children

My wife's arm/shoulder

Records

Yellow ACE bandages

Neon Signs

Scented candles

#Im pretty sure i included everything that was submitted #eating the inedible #not a poll #sorry this is a bit chunky #masterlist of inedibles

35 notes · View notes

blackjackkent · 4 months

Text

OK, beginning what I sincerely hope is the last bit of exploration before we can finally go into Baldur's Gate proper: *trumpet fanfare* the basement of that one blacksmith we ran into.

I legitimately don't know if there's anything important down here but I'm being thorough damn it. My liveblogging integrity is important to me.

There's a waterfall, which automatically makes it more interesting than my basement.

There are several deep gnomes milling around in a room up ahead, one of whom speaks up as Hector and Co approach:

"The boss is expecting you - hasn't forgotten what you did for him at Moonrise."

Yo, what?? This is Wulbren's hideout?

The room is a workshop area, full of blacksmithing tools and scattered pieces of scrap metal. Several of the gnomes say vague things about Steel Watch parts when spoken to, leading me to believe Wulbren may be trying to reverse-engineer the automatons currently protecting the city.

Nickels, one of Wulbren's buddies from Moonrise, is here and not enjoying himself:

"It's stopped - but it'll happen again. It keeps happening! The shivering-shaking-quaking! Don't you feel it?"

"Yes!" Hector agrees, eager for information. "It keeps happening - what is it?"

But Nickels has no info to offer. "There's something underneath the city - inside the rock! But when I ask the stone why it shakes, it only screams." His face twists and his voice turns to a pained whimper. "I want to go home..."

Poor guy. :( Hector didn't actually have context the way we did for what was causing the quakes, so I think this might be the first moment where he puts two and two together and connects this to the Wall Meat from Moonrise and knows for certain that the Absolute is what is causing the quakes. Very bad news.

On a lighter note, the lady we saved from being poisoned in the Underdark is here! Nice to see she got reunited with her friends. All she says, though, is that we'll catch up later and that we should go see Wulbren.

So let's go do that!

Hector's opinion on Wulbren at this point is decidedly middling - he seemed OK in Moonrise, then was a dick at Last Light, and then tried to smooth things over again later on because he realized Hector could be useful to him. So Hector is treading carefully here.

"Good to see you. Wasn't sure you'd make it to the city. Regretting it yet?"

Wulbren always speaks in a very clipped-off tone, matter-of-fact, every syllable flat with determination. But there's a note of anger under it now, and frustration. "I spent a lot of time thinking of worst-case scenarios while I was locked in that cell you plucked me out of at Moonrise," he goes on. "I didn't imagine anything as bad as this. The Gondians have handed Enver Gortash the means to bring about the end of liberty in Baldur's Gate. And the citizens have rolled out the red carpet for their new tyrant!"

His voice lifts angrily. "Resistance fighters are few and far between - my Ironhands, what's left of the Harpers, and you." He raises an eyebrow questioningly at Hector. "I hope."

Hector debates trying to explain all the elements of the situation that Wulbren has no idea of - the Absolute, the Elder Brain, the trio of Chosen (now down to two)... but then thinks better of it. Perhaps it's better if Wulbren thinks this is only a fight for the fate of the city, and not for the minds of its inhabitants. "Gortash is a dead man," he says instead, matching his matter-of-fact tone to the gnome's. "I have reasons of my own for taking him down."

Wulbren's jaw sets and he nods, satisfied. "As long as our objective is the same," he says harshly, "the reason doesn't matter to me. We have a common enemy." He stabs out a finger in Hector's direction. "But neither of us gets what we want until we deal with our biggest obstacle."

It's like watching the fuse run down on a powder keg. As if even thinking of the struggle ahead incenses him, Wulbren suddenly explodes with anger, his words coming faster now, almost tripping over each other. "The Steel Watch! They're a threat to you, me, and every man woman and child in the city. They act all civilized - servants of the people - but they only serve one man. When he becomes Grand Duke, it'll only get worse. Laws will change, freedoms will vanish, and soon you'll be accursed and sentenced before you've even committed a crime!"

Hector listens impassively as the other man rages. He has not yet encountered one of these Steel Watch automatons, but everything Wulbren is saying reflects his own worries based on what he's heard so far. Extremely powerful mechanical weapons under the control of an incredibly dangerous man who is poised to get more powerful than ever and is carrying a juggernaut of destruction behind him.

"And the fucking Gondians are to blame for all of it!" Wulbren finishes with a snarl.

Hector blinks. Well, that part of Wulbren's tirade is a little out of left field. He knows Wulbren's antagonism towards this other clan of gnomes - that he considers them responsible for the Ironhand's fall from grace - but thus far he has heard nothing to indicate a connection to Gortash beyond the fact that Wulbren hates both of them.

"Why put the blame on the Gondians?" he asks curiously.

"They invented the Steel Watchers," Wulbren hisses. "And they're building an army of them. They've always been happy to provide their technology to despots in exchange for a stipend and the freedom to work in peace. They would have licked Sarevok's boots, given the chance, and now they'll kiss Gortash's ring while the city screams."

Weren't you the one who said *your* ancestors worked with Sarevok? Hector thinks dryly, though he doesn't speak this thought aloud.

Wulbren, unheeding of any potential hypocrisy he might be indulging in, continues, "I had a plan to put a stop to them. But the way things are now, if we stick our heads above ground, the Watchers are on us like flies on shit."

This is all very useful intelligence, regardless of Hector's personal feelings on Wulbren. And no matter how... intense... the gnome is about his own vendettas, he's right about one thing - he and Hector have a common enemy. And Hector needs allies.

"Maybe I can help," he says carefully.

"I'm sure you can," Wulbren says at once. "You just need a little assistance, and I can provide it. The Gondians are ingenious. But we're more than equal to them. There's nothing they can build that the Ironhands can't tear down." He rubs his hands together eagerly. "I've built something unique just for that purpose. A runepowder bomb - first of its kind. Fifty wizards high on the Weave couldn't summon this kind of firepower."

"Get the bomb inside the Gondian facility and... boom. Problem solved."

A long silence. Hector shifts uncomfortably. He does not like what Wulbren is describing at all. First of all - he has immediate skepticism of any philosophy that takes more pride in destroying than creating. But more to the point, Wulbren is talking about tasking him with setting off a bomb of unprecedented power in a major manufacturing facility in the middle of a city center. And he wants all the gnomes inside that facility to die.

"Maybe the Gondians are victims, not oppressors," he points out, deliberately placid against Wulbren's anger. He does not consider Wulbren's outlook at all unbiased here, and he considers Gortash fully capable of using unwilling labor in his plots.

"The Gondians picked their side the minute they took orders from Gortash," Wulbren says coldly. "If they had any courage, they'd have refused him and died like heroes, spitting in his face. Now they'll die like the dogs they are."

Hector feels a strange prickling up the back of his spine as he is reminded, abruptly, of the uncompromising rage of He Who Was, back in the shadowlands. He remembers the raised spirit of Madeline, whose crime was rooted in fear of the overwhelming power steamrolling through her life - and who Hector allowed the possibility of forgiveness, out there in the darkness.

Wulbren is no creature of the Shadowfell, but this is the same question, Hector is sure of it. Some of those people could be lost in a terrible situation not of their own making. And he will not kill them so brutally without knowing more of the situation than Wulbren's limited perspective. "I'll make contact with the Gondians," he says firmly. "Maybe they'll see reason."

Wulbren scowls. "Fine. You want to try flapping your gums in the belly of the beast, be my guest. But their idea of diplomacy is a steel fist shoved where the sun don't shine. So take the bomb - just in case I'm right and you're wrong."

Hector nods. "Fine," he says. "I'll take it - but I'll only use it as a last resort." He fully intends not to use it - but Wulbren will be pacified, for now at least, by his taking it.

"As long as you see sense, I don't care when you see it," Wulbren says coolly, handing the device over. "The foundry is in the Lower City, down by the docks. Beautiful building, belching smoke into the sky day and night. Getting inside won't be easy, but when you do, place the bomb at the heart of the facility and get yourself back to street level." His lip curls with a sort of violent glee. "The streets will be clear of Watchers in no time!"

#bjk plays baldur's gate 3 #hector carlisle #i think i'm coming to the conclusion that i don't like wulbren very much :P #and so is hector

8 notes · View notes

transingthoseformers · 6 months

Note

Quintus started the colonies anon here, in my reasoning almost all of the colony Transformers have a tiny amount of energon within them, but mostly subsist on other energy sources: techno-organics along with Maximals and Predacons can subsist on organic and techno-organic food sources and photosynthesis, Camiens can subsist on solar energy so their bodies support various solar panels in their designs, Junkions can use any kind of fuel considering how their planet is basically a scavenger world, Aquatrons including Sharkticons can absorb energy from water and air, etc. Their secondary source of energy aside from energon is that "magic cave water" that the Terrans partake in, but due to the amount on any of the worlds present, it's either not as important or guarded or used only if nothing else can be used.

Camien society is solarpunk inspired and centered around arts and the worship of the 13 Primes.

Eukarian society is centered around scientific discovery and philosophy, with an emphasis on bettering their world through understanding the world around them.

Biosferan society is nature oriented, with a strong spiritual connection to the Primal Plane.

Junkions live on a desert world with a lot of junk on it, and usually pride themselves on recycling the junk around them into useful things, like housing, tools, transport and broadcasting, as well as helping each other when needed.

I haven't figured out any of the other cultures, but that's what I have figured out.

Oooop yesss

There's the minicons on Prion like Nickel

RID15 gives us mecha like Underbite who can survive off of scrap metal (dunno where he's from, I've thought about the idea of Chompazoids coming from a planet that has/had an excess of metals), and predacon-esque mecha like Crazybolt and Flamesnort who cough up great plumes of fire (Crazybolt is referenced as being from Velocitron???), i think in general rid can use the colony worlds as an explanation for why these mecha are rather different from everyone else (i think? That's what tfwiki said somewhere? Somewhere. Perhaps.)

Plus tfwiki gives us several possible planets to fuck around with

#maccadam #transformers #transformers earthspark #we can steal ideas from so many continuities

10 notes · View notes

farmhousesaleinnoida · 1 month

Text

Scrap Buyers in Hyderabad@+91 82978 65751

A S Traders is a leading scrap buying and dealing business based in Hyderabad. We have been in the industry for 15 years and have established ourselves as one of the most reliable and trusted scrap buyers in Hyderabad. We buy all types of scrap Iron scrap, Battery Scrap, Brass Scrap, Computer Scrap, Conveyor Belt, Copper Scrap, Demolishing Work, DG Set, Electrical Scrap, Eva Rubber, Ferrous and Nonferrous, GI Scrap, Glass Scrap, Iron Pipes Scrap, Steel Pipes Scrap, Iron Scrap, Lead Scrap, Motor Parts Scrap, Nickel Scrap, Office Furnitures, Old Air Condition, Old Machinery, Old Vehicles, Plastic Scrap, PVB Rubber, Solar Scrap, Stainless Steel, TMT Steel Scrap, Wooden Scrap and many more. At A S Traders Scrap Buyers in Hyderabad, we offer competitive prices and quick payment to ensure our customers get the best deal possible. We are committed to providing excellent customer service and strive to make the scrap-selling process as easy and hassle-free as possible. Whether you’re a homeowner looking to get rid of some old scrap or a business owner looking to dispose of your industrial scrap, contact us.

Scrap Related FAQs for Hyderabad

What are the way Sell scrap online in Hyderabad ?

There are many ways to sell scrap materials online in Hyderabad as they will come to you on time and pick them up. You can get 24 hours turnaround time, which is not much to get rid of this rubbish collection. There is a freedom to sell metals and non-metals in return for cash in Hyderabad.

What kind of Scrap Metals do scrap Dealer accept in Hyderabad ?

The scrap dealers deal in ferrous and non-ferrous metals that may include heavy types of machinery, electronic appliances, and all other old instruments except woods. You dont have to worry about the weight, size, and material as they accept all the bins from your home in Hyderabad.

How do you pay Steel Scrap Metals in Hyderabad ?

They are offering different ways of paying options as cash, cheque, and bank transfers as per your preference. Get assure cost value in case of any metals as the price of steel scrap cost may also vary as per the metal condition in Hyderabad.

What Price Expect from my batteries Scrap in Hyderabad?

the price may differ in the case of battery scrap as its weight, wear and tears, and the years of usage. In the case of a less used battery, you can expect more price than the battery is totally damaged and out of odor in Hyderabad.

Scrap Dealer Near Me

You can call us at +91 82978 65751 if you are looking for scrap buyers or scrap dealers near you. You can check the Scrap Price or Rate List by calling our customer care team. We are dealing in the following scrap categories –

Copper Scrap

Aluminium Scrap

Iron Scrap

Plastic Scrap

Steel Scrap

Metal Scrap

Car Scrap

Battery Scrap

Brass Scrap

Computer Scrap

Copper Scrap

Electronics Scrap

Home Appliances Scrap

Furniture Scrap

Paper Scrap

Air Condition Scrap

Machinery Scrap

Solar Scrap

Polythene Scrap

Electrical Steel Scrap

X Ray Film Scrap

Automobile Scrap

Computer scrap

Wooden scrap

Carbide Scrap

Zinc Scrap

Truck Scrap

Carbide Scrap

Nylon Scrap

Chemical Scrap

Camera Scrap

Non Ferrous Metal Scrap

Mild Steel Scrap

Bottle Scrap

Battery Scrap

Wire Scrap

Inverter Scrap

Silver Scrap

Photocopier Part Scrap

Building Construction Scrap

Garment Scrap

Tungsten Scrap

Glass Epoxy Scrap

Cotton Scrap

Disposable Scrap

Bakelite Scrap

Aluminum Scrap

Scrap Price/Rate

A New Tangled Notion to Sell Scrap Online in Hyderabad

The scrap dealers are always organized to help their clientele of Hyderabad by buying the scrap rate per kg and by converting that scrap waste product into an advanced well-furnished one, they also have predictable work of ferrous and nonferrous scrap commodities in Hyderabad, the scrap experts of Hyderabad are regimented in producing anything superior from the given scrap material of Hyderabad. The scrap dealers have all pursue one policy of reprocessing the old waste of Hyderabad customers, iron stuff and contain something astonishing which is pollution-free entirely, they try to make an advanced impression in which there can endure the only pollution restricted stuff of Hyderabad, and they all will be constructed through from top to bottom technology apparatus in Hyderabad.

The online scrap dealers of Hyderabad are skilled person with merely one approach of recycling all the longstanding waste scrap products of Hyderabad and produce something astonishing which can be pollution-free entirely in Hyderabad, they try their level best to paradigm an usual cognizance in which there can be all the things which are well-known by the scrap goods but are entirely real and virtuous for health for the person of Hyderabad. The scrap vendors of Hyderabad manage the pieces at a restored level, and due to their agile familiarity of Hyderabad’s scrap, they can effort on all sorts of scrap products of Hyderabad and they are manageable for all 7 days of the weak including all the leading holidays in Hyderabad as well.

If you don’t know about the worth of the scrap in Hyderabad, then you need not worry about it, as this matter of worry has already taken care of by the online scrap price list mend for Hyderabad is already obtainable by the vendors working for scraps in any of the locations of Hyderabad nearby your area. The prices of scraps keep fluctuating as per the market plea and utilization, online scrap service is authentic and the prices can be universally checked from any of the competitors or local vendors in Hyderabad, and hence they provide the best price to the person who are looking to buy their scraps to the vendors which are true and genuinetowards their work in Hyderabad.

Have you ever believed to sell scrap online in the location of Hyderabad? Shocked? Yes, it is right, this is a brand new idea in Hyderabad, actually, in various of the areas in Hyderabad there are society flats with plenty of security and hence, the normal street-vendors are not allowed to enter, in that condition this online service is really helpful in Hyderabad. Being an authorized marketplace of Hyderabad, we are here to connect you with steady online services of scrap selling, as it new idea which is getting more standard in Hyderabad nowadays and we make sure that the vendors who approach your home are registered vendors, that means they are consistent and trustworthy to agreement with despite any location in Hyderabad.

There are various scrap buyers in Hyderabad which may surround you but the most imperative thing is that you do not have time to meet, interact, negotiate with them to sell your old unessential belongings as you are so hectic with your own schedule, but these Online Scrap buyers are obtainable throughout the day in the nearby location of Hyderabad so that you can call them anytime as per your accessibility in Hyderabad. The person who are working-class don’t have time to sell their scraps on usual basis, the online scrap selling service in Hyderabad is really beneficial for them and that is the main purpose for getting this idea more & more standard day by day in Hyderabad.

How to Search The Kabadi Wala at Hyderabad Location

The energy requirements of recycled copper in Hyderabad is as much as 80 to 89% less than the dispensation of new copper from virgin ore for the location of Hyderabad, it is a very supportive step of copper conservation, as copper is a non-renewable source, while only 10-12% of known reserves have been expended. As we all know that, Copper metal is an significant component that is essential for flora and fauna health, reasonable excess disclosure to copper is not allied with health risks in Hyderabad, as with former metal scrap, there are vital conservational advantages to the recycling of the copper scrap of Hyderabad, these cover solid waste departure, abridged energy requirements for dispensation, and natural source protection.

It is always recommended to look for a vendor from the authorized website of Hyderabad as the vendors registered on an authorized website are found more dependable, they always provide notable service to make their brand value and the customer rating or reviews do matter to them despite their location in any of the area of Hyderabad. To locate the kabadi wala near me in any of the locations of Hyderabad, you should know the precise words to put on the search for Hyderabad location, that means along with writing in English as scrap vendors, scrap dealer, scrap purchasing, etc. you must also know how to put it in Hindi as Kabari wala, Kabar ki dukaan, for the areas of Hyderabad.

Are you aware that different to old plastic or paper, metal has cent present perceivable properties, as they can be made impeccable with a single method of recycling, that is the motive the scrap dealers are more interested in buying out your old metal scrap in Hyderabad so that they can earn profit out of this dealing. Now we will talk about metal scrap, metal is a faultless substantial that can be reprocessed and can offer an general variety of profits and rewards in Hyderabad but countless of us don’t know how numerous types of metals are existing in the world, the metal scrap business is one of the primary industries in the Hyderabad location and is still mounting at an recognized stride.

Sometimes the scrap vendors located in Hyderabad do not have contacts and options to recycle the heavy metal scrap, therefore they only accept plastic scrap in Hyderabad, and also the most normal. scrap paper like old books, notebooks, and newspaper in Hyderabad If you also have a lot of steel scrap at your home or office in Hyderabad, you must get in touch contact an experienced scrap vendor and deliberate having it recycled in Hyderabad, you also initially need to ask about the types of scrap they accept and their costs, before calling them at your place, make sure you re-inquire the types of scrap they accept as this shield a lot of your time and energy.

The Different Type of Scraps Sold in Hyderabad

If we talk about the aluminum scrap and the steel scrap of Hyderabad which is very commonly obtained from foils, cans, and other household material, it is mostly used in the infrastructure such as the aluminum windows can be constructed from the old recycled aluminum in Hyderabad, there are several more uses of recycled aluminum in the construction material used for the sites of Hyderabad. Scrap Buyers are there in adequate in Hyderabad, they can assemble the scrap from you, take it to the scrapping ability and ensure the scrap metal is recycled, this not only aids the atmosphere, but it is also used in the home and manufacturing industry, this abolishes the constraint for additional mining to obtain new metals for manufacturing processes.

The battery scrap of Hyderabad is further a productive material as the lead present in the battery is used again, as the lead is again a non-renewable source of energy and have a worthy value of re-sale in Hyderabad, therefore the scrap dealers earn worthy profits after buying the battery scrap from any of the locations of Hyderabad. The scrap dealers also take rejected pet bottle scrap of Hyderabad, they assemble them, sort them, clean them, then they are shredded and modified into washed flakes, which are then used to yield an range of produces, initiating from polyester fibre, which is recycled for a range of applications like filling material for pillows, cushions, and converted to materials for utilization in clothing.

Scrap furniture, a few fitting materials, lights, roofing, computer scrap, and countless more domestic products in Hyderabad can convey recycled scrap metal into depletion, giving objects that have stretched the end of their decided period a new tangled, tempting persistence in Hyderabad.

The old heavy fans installed in your homes are having copper binding in old days and therefore, they are very exclusive and valuable when goes in scrap sale in Hyderabad. If you plan to sell the old fan from your home, then the scrap vendors of Hyderabad are interested to buy it for the copper wire scrap, it is again a vastly valuable contract for them and we can also earn worthy profits by buying the copper cable scrap in Hyderabad.

SCRAP BUYERS IN HYDERABAD

SCRAP BUYERS IN MUMBAI

SCRAP BUYERS IN PUNE

SCRAP BUYER'S IN DELHI

SCRAP BUYER'S IN NOIDA

SCRAP BUYER'S IN CHENNAI

SCRAP BUYER'S IN GUJRAT

SCRAP BUYER'S IN BANGALORE

SCRAP BUYER'S IN ANDHRA PRADESH

SCRAP BUYER'S IN KOLKATA

2 notes · View notes

whumpster-fire · 2 years

Text

Dumb RWS Headcanons: How Do the Faces Work?

I know it's kind of silly but I really like the idea that the engines' faces are actual physical objects.

Vehicles' faceplates are in theory a single piece of metal other than the eyelids, but it changes shape and moves.

Faceplates are manufactured as "blanks" with nondescript features. The first time an engine is steamed or otherwise activated and able to move under its own power, their face warps itself into shape. Within a class there's usually some family resemblance, but no one truly knows what an engine will look like until they're fired up! Twins sometimes happen when two or more engines are built at the same time and place, but identical twins are a small minority of engines, especially steam engines! They're more common the more standardized and mass-produced a vehicle is. Maybe 10% of steam engines and 20-30% of older diesels and electrics are twins/triplets - but this number has risen as multiple units and trainsets become more common. Sometimes engines call themselves twins even if they're not identical - Tallyln and Dolgoch's faces might not be the same as their Sudrian counterparts!

The face is not the center of an engine's sentience, as evidenced by the fact that some engines get on just fine without them! Why do people bother putting faces on them, then?... Honestly it's tradition. Modern people might be more comfortable having a conversation with a machine, but steam locomotives were invented not only over a century before computer-synthesized voices but several decades before the phonograph! Victorian-era British people were not comfortable entrusting their lives to an expressionless machine capable of speech and malice unless they could make eye contact with it.

The reason engines' faces are usually pale grey is because they're made of metals like white bronze, white brass, cupronickel, or nickel silver (note: this is a copper/nickel/zinc alloy and does not contain silver). These alloys are highly corrosion-resistant. Steam engines' smokeboxes are usually painted black because black paints are cheap, IIRC at the time were the only thing heat-resistant enough, and also coal dust and soot are less obvious on it. But the movement of an engine's face will cause paint to flake off very quickly. Theoretically making an engine's face out of colored metals or polishing it to be super shiny is possible but it's not done much, at least in the anglosphere. Some diesel and electric engines have faceplates made of anodized aluminum, (which lets them be the color of the surrounding bodywork), or stainless steel

Yes, you can remove and replace an engine's face! Usually this doesn't need to be done unless they're in a severe crash: steam engines' faces are made of thick metal and are supernaturally strong and ductile, and very corrosion-resistant, and will be just about the last thing to go if an engine is left to rust. If it is replaced, usually a blank won't warp to the right shape until the engine's fired, so the one time faceplates are specially sculpted for a specific engine is with preserved engines whose boilers can't be fired any time soon.

You shouldn't put an engine's face on a different engine. It will end up looking like the engine "wearing" it is supposed to look, but it's painful and results in the face developing cracks prematurely.

Also don't mess with the face of a scrapped engine. Don't use it on another engine, don't mount it on a wall or put it in a museum, just don't. Just lay it to rest by melting it down. You don't have the luxury of "not being superstitious" with the remains of a being that demonstrably had no physical means of speaking, moving, or changing its facial expressions. Human ghosts may be scary but relatively harmless specters of mist, wind, and whispers: the ghost of a machine is a poltergeist with the same power over fire, metal, electricity, inertia, and building-leveling amounts of pressurized steam that it did in life, but no longer limited to influencing its own body. The vengeful spirit of a departed steam engine doesn't rattle doorknobs or knock vases off tables, it causes unexplained gas leaks, failed pilot lights, broken chains or cables or hydraulic jacks, glitched carbon monoxide detectors, and water heaters or boilers that won't shut off and the emergency relief valves inexplicably jam.

Usually faces for non-powered rolling stock are made of carved wood or are painted on. Putting metal faces on them is mostly a Sodor thing, and possibly the GWR.

I'm not sure what engines' eyes are made of... maybe glass, or maybe they're hollow metal spheres? Either way the pupil is actually transparent and the inside surface of the eye is black. Faceless vehicles can see without eyes moderately well, but ones built with faces aren't used to it and can't see at all or very little if their eyes are covered or removed. Some engines' eyes light up (if an IRL engine's headlight is on the front of the smokebox, it probably has glowing eyes).

There isn't any mechanical device that moves an engine's eyes, but they do have physical support. They're kind of like a trackball computer mouse. They need to be lubricated and kept clean, and there is a real system for this. Some engines use condensed steam (usually coming from the source of steam for other accessories) or other water-based liquid for tears, but some might use mineral oil?

By the way these eyes can be big! Some of the largest American engines have eyeballs well over 2 feet in diameter!

Yes, the face swings open to access the smokebox/grille. The face itself may be on the smokebox door or be in front of it and on a separate hinge. The catch for the faceplate hinge is typically on the side of the smokebox. And then there are the Cab-Forwards and Garratts.

#Railway Series Fandom #dumb headcanons

44 notes · View notes

coveredinmetaldust · 6 months

Text

December, 2019 Copper, brass, nickel, faux fur, tie-tacks Hair varies; metal rim is 40mm in diameter, 2.5mm thick

A series of three brooches I made for very good friends of mine for Christmas. The three of them are furries, and each brooch contains scraps of faux fur from their specific fur suit.

Since it is not quite socially acceptable to wear a fur suit to most events (business meetings, interviews, funerals, etc.) these aim to serve as the next best thing. It is a subtle nod towards this sub-culture, and as well as a potential secret handshake for those who are also part of the scene.

Funny story about the brooch in the middle: I went to college with the recipient of this brooch, and we both majored in metalsmithing. There was one assignment where everyone had to make a box out of brass sheet metal, and he chose to use an alloy called "Nickel Silver" instead.

For those unaware, nickel silver is a pain in the ass to work with for most applications, but it's a fucking nightmare if you're trying to fabricate it into a large hollow form via flat sheets, using an acetylene torch to braze it. (Colloquially known as "soldering.") One fun quirk of that metal is that it likes to bow and warp in response to being heated up, which is the exact opposite of what you want when making a square box where everything has to be fit together perfectly. But he stuck with it and finished that box. So I made his brooch out of nickel silver as a little in-joke.

(To clarify: I am not a furry. However, a reputable source has assured me that they believe a badger would be my fursona. Take that however you'd like.)

#jewelry #metalsmithing #metalsmith #handmade #art jewelry #wmvmetals #furry fandom #furry

6 notes · View notes

outofthiisworld · 4 months

Text

@5mind [OPERATION PROTECT OLD MAN]: SUCCESS

[🧪] If this old geezer had a nickel for every time he narrowly avoided the toll of death's knell, why— he'd give the richest man in the world a run for his money.

Doc hardly had any time to react, let alone notice the rushing assailant until after it was all said and done. Until after his automaton companion pulled him to the side and stood tall as an unstoppable shield of metal and wires. Until after scrap metal shot and tore through machine FLESH like wet tissue.

It was silent, other than the heavy thud of a corpse dropping to the ground. Doc gripped his chest, almost as if his heart may jump out if he hadn't. Then, relief.

"Hey. Thank you," Doc broke the silence with a sigh and patted Yellow Three's arm that still shielded him. "Anything moving that fast couldn't have been good news— not in my experience."

Was Doc comforting Yellow, or himself? Hard to tell— but it wasn't the first time a quick decision had to be made, and it wouldn't be the last.

"C'mon, lets get this body taken care of— before any more wackos get any more bright ideas."

#🧪... ic #5mind #doc ... fivemind #//we don’t have to continue this of course of course BUT i HAD to write Doc’s response it was a must #🪐 … queue

2 notes · View notes

dawn-of-worlds · 1 year

Text

Where there's a whale...

(2d6->7, plus 3 makes 10)

Haebarik watched as humans spread across Incarien, and was pleased. He watched the potters in the east, the traders and warriors in the south, the herdsmen and whalers in the scarcer north.

He watched, with slightly greater concern, the Ebon Priests, as their influence grew in more and more villages, as their instructions fell on receptive ears. Raids became more common, the losers dragged off to work on mysterious constructions. To Haebarik's shock, not all slavers were associated with the priests: some were merely opportunists eager to exploit this new demand for labor. Evil, it seemed, existed not merely in higher beings.

But surely, surely there would always be some humans untouched by that wicked faith?

...perhaps it would be good to make sure of that.

Haebarik extends his arm, reaching higher than birds fly, higher than Eppethikuja may soar, higher than the winds themselves may reach. His dark arm disappears against the void, its inlaid gems substituting for those stars it blots out. At last, his fingers close around a large mass of rock, and he pulls it down to earth.

Those who behold Haebarik's handiwork in the future will explain it such.

During the first day of creation, all things floated in an endless void, and no thing could touch any other thing, and life was impossible. It was then that a god (whose identify is never agreed upon) bestowed weight upon this matter, causing it to fall down into a large pile called the world. But the god missed a few scraps of rock, which still float high above the world, and from time to time he still spots one and sends it down towards the others. This is thus why stars sometimes fall to earth, and their pure and weightless form is what Haebarik used for his avatar.

Maretik! The Void Whale, the Hunger Above, the Envoyager. Some mistake it for a child of Naakrsh, others for a sibling of Ohm. It is none of those things, as its inability to destroy anything real should make clear.

Maretik's hide is a very dark grey, covered in large thumbprint-like indents left over from Haebarik's shaping. Its size is that of a mountain, its maw a small lake, its many eyes a house each. Where one might expect barnacles on a normal whale, Maretik bears boulder-sized clumps of shining iron, nickel, and cobalt, and its baleen are thin wires of the same metals, which may fit to form a perfect seal. Lacking weight, Maretik may swim through the sky and the void beyond, propelled by divine force.

(for the physicists in the audience, model Maretik as lacking gravitational mass but not inertial mass)

When the Void Whale acts, it does so thus:

Fist, it descends singing from its resting-place above the clouds, song echoing for a hundred miles, evoking images of vast stretches of nothingness, of large hollow things, of great yawning voids. Some flee, at this, others are paralyzed with dread, others yet understand, somehow, that they need not be afraid, and wait with peaceable calm.

Then, the Whale arrives, blanketing the land in its shadow. The song ends; there is a moment of quiet and darkness, and then its maw opens. Beyond lies a cavernous space, lit by the soft glow of starlight (for at the dawn of time, a few cowardly rays fled Velarië's anvil and found shelter in this rock).

Then the maw closes, engulfing all that which it came for. The Whale departs, leaving only a miles-long gorge in the land. In time, it will fill and become just another lake.

And what of its cargo? They find themselves unharmed: carried along their homes and stores, their ancestral soil, their tools and weapons. The journey's duration is impossible to tell, but none go hungry or thirsty, and all experience a comfortable calm.

Then, the maw opens once more, bright sunlight flooding the Whale's gut. The contents are expelled, no worse for the wear than a few cuts or scrapes. While the transplanted mortals are still getting their bearings, the Whale is already returning to the void: never again will it visit this place.

As the settlers sift through their expelled belongings, they may find things that never were theirs: leftover possessions from past transplants, treasures from abandoned and devoured places, plants and beasts from strange lands, and weirder things still, things that drift through the heavens as Maretik does, swallowed absentmindedly and now free once more.

(Create Avatar for 7 points, 3 remaining more actions to follow)

#world 02547 diegesis

5 notes · View notes

ferroalloysexporter · 1 year

Text

Ways for Identifying Scrap Metal

Scrap metal recycling can be overwhelming in the beginning due to its varieties. Scrap metal falls into multiple categories, metal types, and grades. It is essential to know the metal type if you are constructing a structure utilizing recycled scrap metal or have a business for recycling scrap metal.

Scrap metal has a high value in production systems as it can save resources and costs for mining new metal. Since scrap metal recycling involves melting and repurposing old scrap metal, it is essential to know its type, like Hastelloy C22 scrap, to determine its applications and value. The following articles explain how to distinguish and identify types of scrap metal.

Types of scrap metal

Scrap metal is valuable in different industries, and it is categorized into two prime categories:

Ferrous metals

These metals have high levels of carbon, making them corrosive and leading to their destruction. Some of the top ferrous metals involve nickel scrap metal, steel metal scrap, iron, and stainless steel scrap metal.

Non-ferrous metals

It is another category of scrap metal, and they do not have iron content. These are not magnetic and offer resistance to rust and corrosion. Some examples of non-ferrous metals include zinc, copper, lead, tin, gold, nickel alloys scrap, and aluminum.

Ways to identify scrap metal

It is essential to identify scrap metal, sort them into different types and reuse them for multiple purposes. Following are the ways to identify scrap metal:

Original application

The scrap metal’s earlier application is essential to understanding and sorting the scrap metal type. Specific applications require certain metals. For instance, iron finds applications in machines that have indoor usage as iron is prone to corrosion.

Copper finds application in electrical wiring for its high conductivity. It is also prominent to note tin is not suitable for plumbing pipes as it can bend easily. Hence, the original application of the metal helps to identify the scrap metal in case one cannot identify its characteristics clearly and determine the rate of steel scrap in India.

Magnetic properties

The way a metal reacts to magnetic tests helps categorize it into ferrous metals and non-ferrous metals. One can simply hold a magnet piece near the scrap metal. If the metal piece is ferrous, it will attract the magnet and one can classify it as an iron alloy.

Non-ferrous metals, on the other hand, do not attract to a magnet, making it easy to identify non-magnetic scrap metals like aluminum or brass.

Metal hardness

The hardness of the metal also helps to determine the scrap metal type. One can test metal hardness using a mill file. If the metal piece is easy to flake, it is likely to be copper. You can identify different scrap metals by testing their harness as follows:

Copper: It is soft and flakes with ease with a mill file.

Cast iron: It produces brittle metal flakes that are easily breakable with a hammer and a cold chisel.

Steel: It is easy to identify steel metal scrap with its hard flakes.

Aluminum, malleable iron, and steel: It produces durable metal flakes that do not break quickly by chiseling.

Scrap metal color

It is easy to categorize some scrap metals by their metal colors. A simple visual test will help to identify the scrap metal. At times these metals are colored or coated, which can make it difficult to identify them with visual tests. One can scrape off the rust or paint to check the original color of the metal.

Metal weight

Another way to identify the scrap metal is by checking its weight. Metals like lead and iron are heavy, while scrap metals like aluminum are light and bend easily.

Metal oxidation

The way a metal piece oxidizes or does not oxidize reveals its chemical composition and type. You can identify scarp metals with their oxidation as follows.

Rusted bronze or copper has a green color.

Iron has red rust.

Stainless steel scrap metal does not oxidize.

Final thoughts

The above guide will help you identify scrap metal. If you want to save potential capital, you can opt for scrap metal from scrap metal suppliers like Vardhman Ferro Alloys, a leading metal scrap supplier in India. The company is also a leading high nickel alloy scrap supplier in India.

#scrap metal #Stainless steel scrap #High Nickel alloy scrap

0 notes

gadgetcheat · 7 days

Note

i haven't been using tumplr as much so i haven't seen which ones u may have already answered but 3 5 10 12 and 21 for the rejuv asks >:^)

answered 5 and 12 in a previous post, they're under my posts tag!

renegade spoilers under the cut and this is gonna be a long one

3. favorite moment?

the karma beast battle in renegade OHHH MY GOD. holy fucking raw. all that spoiler dodging paid off because ohhhh my god guys. axiom waltz and the music transition like HELLO? they knocked this moment out of the damn parkkkk when i tell you how hard my heart sank into my ass. like i was staring at my computer mortified for a good four minutes at the battle start screen. that's what makes it so memorable to me because it's such a good staple moment of renegade i feel. for me it was easy to not take renegade too seriously when it was just pressing an evil button and dealing with m2's antics at first but seeing a guy get rifted into a horrible dying and melting poison bird monstrosity by karma just to try and stop you was such an "Oh this game isn't fucking around" moment for me. and this is in CHAPTER 0 of renegade. like that was just the beginning this oblivion shit gets SERIOUS. if the devs keep this up im probably going to be an alcoholic by the time the game is finished. im so excited

10. favorite villain/antagonist(s)?

dont even joke lad

clear + kieran (+ eden) its not even a competition. my favorite characters in the entire game unfortunately. in fact they were even my favorites before i actually played the game just from what i heard of them from my friends💀. i heard badass evil androids from another universe and i was TUNED the fuck IN. i think its because i like sci-fi too much. i love love love all three of them but clear is ever so slightly my #1 ONLY because she uses a bunch of my favorite pokemon. orbeetle, klinklang, porygon-z, and you tell beheeyemlover56 that a character's ace pokemon is a beheeyem and i will be there No Matter What

theyre just SOOO SO INTERESTING and cool and everything about them is awesome. even all of the atrocities because they looked awesome while doing it. i love the character dynamic between clear and kieran and i love their stupid ass catchphrases that they cling onto like their lives depend on it and i love the insane lore deal they have going on they occupy my brain 24/7. im sooo excited to see how much more fucked up they'll get in the future. i will support them !

on account of eden being scrap metal and having about 3 dollars and a nickel of revealed lore i can't say much about them but from what we do know oooohhhhh i am SO HYPED to find out more. doubt they'll bring eden back from the grave but i am very intrigued to see just what impact they had on crescent/A-gang/storm 9. they sound particularly terrifying and freaky. i cant wait. oblivion forever🔥

21. favorite chapter?

probably to no one's surprise its chapter 15 lmfao. all three of the routes are SO MUCH FUN and i really enjoy the focus on characters other than just Le Interceptor for a change. i kind of love lore-heavy chapters and all of the reveals in chapter 15 are so crazy and exciting. and no other chapter has platinum route in it. luv u platinum route <3

additionally the v13.5 overhaul to chapter 10 was AMAZING and now thats definitely my second favorite chapter. my jaw dropped when i saw all the new pretty updated areas and sprites

thank you for the ask!

#posts #asks #pkmnrejuv #with a modest 275 word murder android love letter

1 note · View note

mohankunmars · 8 days

Text

Steel Market — Forecast (2024–2030)

Steel market is analyzed to be $1,746.35 billion in 2023 and is projected to reach $2,105 billion in 2030. The market is estimated to grow with a CAGR of 4.13% during 2024-2030. Steel is an alloy that is made up of iron ore or scrap steel and carbon. In general, steels have various unique properties including being non-corrosive, rust-resistant and heavier than other metals such as aluminum. Therefore, steel is extensively used in various end-use industry verticals, including the manufacturing various transportation and automobile components, medical equipment, metal surgical implants, structural components and more, which in turn is boosting its market growth. In recent years, the steel market has experienced fluctuations driven by several factors. One significant trend in the steel market is the impact of trade policies and tariffs. Trade tensions between major steel-producing nations, such as the United States, China, and the European Union, have led to shifts in supply chains and pricing dynamics. Tariffs imposed on steel imports have affected the competitiveness of domestic producers and influenced global trade patterns. Additionally, sustainability concerns and environmental regulations have influenced market dynamics. Increasing awareness of carbon emissions and the environmental footprint of steel production has led to a growing demand for greener steel products. This has prompted investments in cleaner production technologies such as electric arc furnaces and the development of recycled steel. Moreover, technological advancements and innovations in steel manufacturing processes have enhanced efficiency and product quality. As a result, the steel market is poised for sustained growth as global economic recovery accelerates, with innovations in technology and sustainability shaping future trends.

Steel Market Report Coverage

The report: “Steel Industry – Forecast (2024-2030)”, by IndustryARC covers an in-depth analysis of the following segments of the Steel Market Report. By Type: Carbon Steel, (Low Carbon Steel, Medium Carbon Steel, High Carbon Steel), Stainless Steel (Austenitic Stainless Steels, Ferritic Stainless Steels, Martensitic Stainless Steels, Precipitation Hardening Grade Stainless Steels, Duplex Stainless Steels), Alloy Steel (Chromium Molybdenum Steel, Nickel-Chromium-Molybdenum Steel, Chromium Vanadium Steel, HSLA -Nickel-Chromium-Molybdenum Steel), Tool Steel (Water-hardening tool steels, Shock-resisting tool steels, Cold-work tool steels, Hot-work steels, High-speed tool steels, Others), Others By Form: Bar, Rod, Tube, Pipe, Plate, Sheet, Structural, Others By Application: Transportation (Road, Bridges, Barriers, Rail, Tracks, Rail Cars), Construction (Cool Metal (infrared reflecting) Roofing, Purlins, Beams, Pipe, Recyclable steel framing (studs), Desks/Furniture), Packaging (Canes, Bottles, Others), Water Projects (Levees/Dams/Locks), Energy (Renewable, Nuclear, Bio-fuels, Fossil, Electric Grid), Others By Industry: Construction (Steel Skeletons, Concrete Walls, Pillars, Nails, Bolts, Screws, Others), Machinery (Bulldozers, Backhoe Leaders, Pipelayers, Others), Automotive and Transportation (Exhaust, Trim/Decorative, Engine, Chassis, Fasteners, Tubing For Fuel Lines), Kitchenware and Domestic Appliances (Small Household Appliances, Black Home Appliances, White Home Appliances), Electrical and Electronics (Motor Mount Brackets, Adapter Plates, Electronic Frames and Chassis, Brackets, Others), Healthcare (Orthopaedic Implants, Artificial Heart Valves, Bone Fixation, Catheters, Others), Energy (Scrubbers, Heat Exchangers, Others) By Region: North America, South America, Europe, Asia-Pacific and Rest of the World

Request Sample

Key Takeaways

Steel Market Segment Analysis – By Type In terms of type, the Steel Market is segmented into carbon steel, stainless steel, alloy steel, tool steel and others. In 2023, the Stainless-steel segment generated the greatest revenue of $361.94 billion and is projected to reach a revenue of $482.28 billion by 2030. Owing to the various benefits posed by stainless steel such as corrosion resistance, high and low temperature resistance, the ease of fabrication, strength, aesthetic appeal is one of the key factors for its adoption among various end-use industries, which in turn is boosting its market growth. The stainless-steel segment can be further classified as Austenitic stainless steels, Ferritic stainless steels, Martensitic stainless steels, Precipitation hardening grade stainless steel and Duplex stainless steels.

Steel Market Segment Analysis – By Form By form, the steel market is segmented into bar, rod, tube, pipe, plate, sheet, structural and others. The bar segment accounted for the major market share in 2023, with a revenue of $554.58 billion, and is forecast to grow at a CAGR of 4.68% by 2030. The increasing demand for steel bar from various end-user industries such as building and construction, bridges, and many others, are driving the growth of the segment during the forecast period of 2024-2030.

Steel Market Segment Analysis – By Application Steel Market is segmented by its application that includes transportation, construction, packaging, water projects, energy and others. The energy segment held the dominant market share, 31% of the whole market, in 2023, and is expected to maintain its dominance by 2030 with a CAGR of 4.69%. One of the major factors for the segment growth is the increasing awareness and focus towards renewable energy sources. Steel plays a crucial role in producing and distributing energy as well as improving energy efficiency. Renewable energy is further classified as Wind Towers and Foundation, Wind Turbines and Solar Parabolic Mirror Supports & Collectors.

Steel Market Segment Analysis – By Industry The Steel finds its application across the industries such as construction, machinery, automotive and transportation, kitchenware and domestic appliance, electrical and electronics, healthcare, energy and others. Among them, the construction segment is the largest consumer of steel, as bearable structures can be manufactured easily at a low cost. The property of steel in its various forms and alloys makes it more flexible to cater the exclusive projects integrated with infrastructure. Moreover, the rapid industrialization and urbanization in various developing countries are fueling the segment growth in strengthening its dominant market position during the forecast period.

Buy Now

Steel Market Segment Analysis - By Geography/Country The report comprises of the region wise study of the global market including North America, South America, Europe, Asia-Pacific and Rest of the World. Above all, Asia-Pacific region held the biggest share in 2023, up to 63% of the whole steel market owing to the rapidly expanding defense, machinery, automotive, and shipbuilding industries in the countries such as India, China, South Korea, and Japan. Foreign direct investment in energy and infrastructure is likely to provide opportunities for the market vendors. Coupled with favorable government regulations, growing infrastructure and construction activities in developing economies of the Asia-Pacific region are boosting the demand for the market.

Steel Market - Drivers

Growing Demand for Steel Across the Various Regions Several factors have a significant impact on the overall development of the steel market. The major growth factor driving the Steel Market is the growing demand for steel across a variety of developing regions. For instance, Global crude steel production in January-November 2023 reached 1715.12 million metric tons, marking a marginal 0.5% year-on-year growth, per provisional data from the World Steel Association. November 2023 saw a production of 145.5 million metric tons, up by 3.3% from the previous year. China led the production with 952.14 million metric tons, followed by India and Japan, USA, Russia, South Korea, and Germany.

Construction and Infrastructure Development: Construction activities, including residential, commercial, and infrastructure projects such as roads, bridges, and railways, are major drivers of steel demand. Urbanization and industrialization also contribute to the growth of the construction sector, thereby increasing the demand for steel products. For instance, as per Green Finance & Development Center, China Belt and Road Initiative (BRI) Investment Report 2023, engagement totalled about USD88.3 billion, with USD44.6 billion from investment and USD43.7 billion from construction contracts. Also, The US Department of Transportation allocates $3.2 billion in extra funding, alongside $4.3 billion from the Bipartisan Infrastructure Law for 2023. The Budget prioritizes $4.5 billion for the Capital Investment Grant program, aiming to bolster transit infrastructure for economic growth. As a result, the steel market is anticipated to thrive, propelled by heightened construction activities and the need for durable materials, reflecting a promising outlook for the industry.

Steel Market -Challenges

Environmental Regulations and Sustainability The steel industry is facing mounting pressure to tackle environmental issues by cutting carbon emissions and enhancing sustainability efforts. Meeting stringent environmental regulations demands substantial investments in technology and infrastructure, presenting a formidable challenge for many companies. Despite the financial hurdles, embracing these changes can pave the way for a more sustainable and eco-friendly future for the industry.

Steel Market - Competitive Landscape The companies referred in the study include Baosteel Co., Ltd., Posco Holding Inc, Nippon Steel Corporation, JFE Holdings, Tata Steel Limited, United States Steel Corporation, Anshan Iron and Steel Group Corporation, Hyundai Steel Co., Ltd., ThyssenKrupp AG, ArcelorMittal S.A., among others. Technology launches, acquisitions, and R&D activities are key strategies adopted by the key players in the Steel Market.

0 notes

rsscrapbuyersinhyderabad · 15 days

Text

Empowering Sustainability: The Rise of Scrap Buyers in Madhapur

In the vibrant city of Madhapur, nestled in the heart of Hyderabad, a silent revolution is underway in the realm of waste management. With the rapid proliferation of electronic devices and industrial machinery, the need for responsible disposal and resource recovery has never been more pressing. Enter the unsung heroes of sustainability: scrap buyers. These entities, specializing in the procurement and recycling of various scrap materials, including batteries, copper, and e-waste, are playing a pivotal role in reshaping the city's environmental landscape.

Battery Scrap Buyers in Madhapur:

Batteries, whether they power our gadgets or fuel our vehicles, are ubiquitous in modern life. However, when these batteries reach the end of their lifespan, they pose a significant environmental hazard if not disposed of properly. Battery scrap buyers in Madhapur recognize the value in these seemingly spent power sources. They employ advanced techniques to extract valuable materials like lead, nickel, and lithium for recycling. By diverting batteries from landfills and reintroducing their components into the production cycle, these buyers contribute to resource conservation and pollution prevention.

Copper Scrap Buyers in Madhapur:

Copper, prized for its conductivity and versatility, is a staple in industries ranging from construction to electronics. However, the extraction and processing of new copper come with significant environmental costs. Copper scrap buyers in Madhapur offer a sustainable alternative by sourcing scrap copper from various sources, including electrical wiring, plumbing fixtures, and industrial machinery. Through efficient recycling processes, these buyers extract pure copper from scrap materials, reducing the need for virgin resources and mitigating the environmental impact of copper production.

E-Waste Scrap Buyers in Madhapur:

In an era defined by technological innovation, electronic devices have become indispensable tools for communication, productivity, and entertainment. However, the rapid turnover of electronic gadgets has led to a surge in e-waste, presenting both environmental and health hazards. E-waste scrap buyers in Madhapur tackle this pressing issue head-on by providing comprehensive recycling solutions for discarded electronics. From smartphones and laptops to televisions and printers, these buyers responsibly dismantle e-waste, recovering valuable components like precious metals, plastics, and glass for reuse in new products.

In the bustling city of Madhapur, scrap buyers serve as catalysts for change, driving sustainable practices and promoting environmental stewardship. By recognizing the inherent value in discarded materials and embracing innovative recycling technologies, these buyers are not only transforming waste management but also laying the foundation for a more resilient and resource-efficient future. As the demand for sustainable solutions continues to grow, the role of scrap buyers in Madhapur becomes increasingly indispensable in shaping a greener and more sustainable tomorrow.

#Battery scrap buyers in Madhapur #Copper scrap buyers in Madhapur #E-waste scrap buyers in Madhapur

0 notes

bloggerpost2w322 · 17 days

Text

Understanding Jindal SS 316 Sheet Price List

Stainless steel has become an indispensable material in various industries due to its exceptional properties like corrosion resistance, durability, and aesthetic appeal. Among the different grades of stainless steel, SS 316 stands out for its superior corrosion resistance, making it ideal for applications in harsh environments such as marine and chemical processing. Jindal Stainless Limited, a leading stainless steel manufacturer, offers a wide range of SS 316 sheets, and understanding their price list is crucial for businesses and consumers alike. In this blog, we'll delve into the factors influencing the price of Jindal SS 316 sheets and provide insights into interpreting the price list.

Factors Influencing SS 316 Sheet Prices

Raw Material Costs: The primary raw material for stainless steel production is scrap metal, nickel, and chromium. Fluctuations in the prices of these raw materials significantly impact the overall cost of manufacturing SS 316 sheets. For instance, an increase in nickel prices due to geopolitical tensions or supply chain disruptions can lead to higher sheet prices.

Manufacturing Process: The manufacturing process adopted by Jindal Stainless Limited also influences the price of SS 316 sheets. Advanced production techniques, such as hot rolling, cold rolling, and annealing, may incur higher production costs, reflecting in the final price of the sheets.

Market Demand and Supply: Like any other commodity, stainless steel prices are subject to market dynamics, including demand-supply imbalances. During periods of high demand or limited supply, prices tend to rise. Conversely, oversupply or weak demand may lead to price corrections.

Quality and Specifications: Jindal offers SS 316 sheets in various grades, thicknesses, and finishes to cater to diverse customer requirements. Sheets with higher quality finishes or precise specifications may command a premium price due to additional processing and quality control measures involved.

Interpreting Jindal SS 316 Sheet Price List

Jindal Stainless Limited provides a comprehensive price list for its SS 316 sheets, detailing various specifications and corresponding prices. Here's how to interpret the price list effectively

Grade and Thickness: The price list typically categorizes SS 316 sheets based on their grade (316), thickness (measured in gauge or millimeters), and surface finish (e.g., 2B, BA, No.4).

Quantity and Packaging: Prices may vary depending on the quantity of sheets ordered and packaging preferences (e.g., standard bundles, coils, or custom packaging). Bulk orders often qualify for volume discounts, which are reflected in the price list.

Currency and Pricing Units: Ensure that you understand the currency (e.g., USD, INR) and pricing units (e.g., price per kg, price per sheet) mentioned in the price list to accurately assess the cost implications.

Additional Charges: Consider any additional charges such as taxes, transportation costs, or surcharges, which may not be explicitly mentioned in the price list but can affect the overall procurement cost.

Conclusion

Jindal Stainless 316 sheets are renowned for their quality, durability, and corrosion resistance, making them a preferred choice for various industrial and architectural applications. By understanding the factors influencing SS 316 sheet prices and interpreting Jindal's price list effectively, businesses and consumers can make informed decisions regarding procurement while ensuring value for money. Stay updated with market trends and collaborate with reliable suppliers like Jindal Stainless Limited to optimize your stainless steel procurement process.

0 notes