Algunos proyectos 3d que ocupo en día a día

la base verde que se ve bajo un kit de atornillador de precisión Xiaomi me encanto como quedaba y la imprimí con el primer filamento de color que compre era un verde manzana gst3d buenísimo abajo tenemos una figura de deadpool en el mismo material y color pintada a mano con esmaltes de uñas por que quería probar que tal pintaba, arriba de eso esta un organizador para el escritorio que es el único de los objetos impreso en material PETG que es un familiar de las botellas desechables de gaseosas, al lado en amarillo están unas tijeras que tenia tiradas sin mango que se habían quebrado y las recupere con unos mangos impresos al lado esta el cuerpo de un cúter de hoja pequeña muy cómodo para trabajar en cortes de precisión después tenemos uno de muchos de los soportes de móvil para escritorio lo único que no sirve con móviles con funda por que es solo para el móvil desnudo y arriba del todo esta un dock o stand para mouse y teclado, el del mouse lo busque por el modelo de mi ratón que es un g305 de Logitech.

todo esto lo busque en https://www.thingiverse.com/

Round Top with Fuel Gauge, Filament Storage Box.

The gauge in the front is a manual slider, when you put your spool in, just slide it to how much is left on the spool, no more guessing.  

The belt can be printed in black to save on filament. Or in the same filament that is in the box.  NO Schrödinger's Filament.

This box has a 1.5mm thick wall sto use a minimum amount of filament, so best just to sit on a shelf.  

Not airtight, so I toss in a few desiccant packs, and only store PLA in them.  

There are no clips/hinges holding it together, just gravity and alignment tabs.

No internal structures to accept as many types of spools as possible.  I purchase a large variety of filaments, spools vary from different manufacturers. 

These filament storage boxes are totally original designs, I had to learn CAD skills to design them, they are not modified from others designs.  They are not drying boxes, just filament storage boxes.  

You can get the print files at my Esty shop:  https://www.etsy.com/listing/1325788053/filament-storage-box-round-top-with-fuel

CAD Program (free hobby account). www.onshape.com, 

3D Printing Slice (free)r, Ultimaker Cura, https://ultimaker.com/software/ultimaker-cura

The GST3D PLA+ filament I have been using is a fantastic filament, prints great, with dialing in the settings, no stringing.   And it is inexpensive, about $10 a spool if you buy 10 qty.  It is compatible with popular name brands in the $20 to $20 per spool range.

The filament used GST3D PLA+:   https://fremover.net/?ref=zrHl1LXF

You can get spools of filament for around $10 when you get the 10 pack, and it is good filament comparable to popular brands. And yes I get a few nickels if you use the above link.

Printer used an Anycubic Vyper, https://anycubic.us.com/anycubic-vyper/

Printing files for Filament Storage Box: https://www.thingiverse.com/thing:5539229

Assembling the Fibonacci 32 Soldering Kit from Cyber City Circuits

Assembling the Fibonacci 32 Soldering Kit from Cyber City Circuits

This post may contain affiliate links. To find out more information, please read my disclaimer. Earlier this spring, I received my May 2021 Cyber City Circuits soldering kit. Once again, the soldering kit was incredible. The kit is a Fibonacci 32 designed by Evil Genius Labs. In addition, the kit has an Arduino Nano powering 32 RGB lights in a fantastic little light show. This kit is also an…

View On WordPress

Hubcap,  filament storage box.

I call this one a Hubcap Box. The hubcap pattern on the outside of the box is not just for appearance, it adds some structural strength to the storage box.  

Another filament storage box (not a dry box) with a color belt and a label tag for filament type. 

Included tags are some common filament types and a blank one.  If you need a tag in a specific filament type let me know.

It is 210x210x96mm, accommodating slightly large spools up to 200mm x 85mm in width.  

Designed it with a 2mm thick shell.  For a stronger storage box, you can print with 4 walls, which will be mostly walls and little infill.

If you want quicker print time you can go with 1 wall, your infill pattern may show.  

Not airtight, so I toss in a few desiccant packs, and only store PLA in them.  

They are not for transport, just for putting filament in and setting it on the shelf.  There are no clips/hinges holding it together, just gravity and alignment tabs.

No internal structures to accept as many types of spools as possible.  I purchase a large variety of filaments, spools vary from different manufacturers. 

Your can get the print files over at  my Esty shop:  

For the price vs quality, this GST3D PLA+ filament is my first choice, It is a great filament, 

The GST3D PLA+ filament I have been using is a fantastic filament, prints great, with dialing in the settings, no stringing.   And it is inexpensive, about $10 a spool if you buy 10 qty.  It is compatible with popular name brands in the $20 to $20 per spool range.

The filament used GST3D PLA+:   https://fremover.net/?ref=zrHl1LXF

You can get spools of filament for around $10 when you get the 10 pack, and it is good filament comparable to popular brands. And yes I get a few nickels if you use the above link.

Printer used an Anycubic Vyper.

Voronoi with spool holders,  filament storage box.

Another filament storage box (not a drying box).

This one has a center spool holder.  And a small filament holder, just slide a short length of filament the same as that is in the box.

This has two options, one with a gasket (printed it TPU) or without.

You will need a print area of at least 245mmto print.

It is 240x96mm, accommodating slightly large spools up to 215mm x 80m in width.  

Designed it with a 2mm thick shell.  For a stronger storage box, you can print with 4 walls, which will be mostly walls and little infill.

If you want quicker print time you can go with 1 wall, your infill pattern may show.  

Not airtight, so I toss in a few desiccant packs, and only store PLA in them.  

They are not for transport, just for putting filament in and setting it on the shelf.  There are no clips/hinges holding it together, just gravity and alignment tabs.

The print files are available over at my Esty shop. www.etsy.com/listing/1313893880/filament-storage-box-voronoi-with-spool

For the price vs quality, this GST3D PLA+ filament is my first choice, It is a great filament, 

The GST3D PLA+ filament I have been using is a fantastic filament, prints great, with dialing in the settings, no stringing.   And it is inexpensive, about $10 a spool if you buy 10 qty.  It is compatible with popular name brands in the $20 to $20 per spool range.

The filament used GST3D PLA+:   https://fremover.net/?ref=zrHl1LXF

You can get spools of filament for around $10 when you get the 10 pack, and it is good filament comparable to popular brands. And yes I get a few nickels if you use the above link.

Printer used an Anycubic Vyper.

Installing my BigTreeTech skr2 w4 2209 drivers! The gloves are off !!

Installing my BigTreeTech skr2 w4 2209 drivers! The gloves are off !!

Got my beast boards ready!!

#gst3d #3dprinting #3d #3dmodeling #3dprinter #dad #daughter I want another 3D printer and she won’t let me use her money!!! https://www.instagram.com/p/CS11VXZHzfM/?utm_medium=tumblr

#3dprinting #gst3d #tinkercad #nf https://www.instagram.com/p/CSoiCepnsbd/?utm_medium=tumblr

Ender 3 all nicely dialed in !!! #gst3d PLA+ filament https://www.instagram.com/p/CRu1rbihn5b/?utm_medium=tumblr

#gst3d #gst3dfilament #gst3dpla #sunlu3d #sunlu #sunlu3dprinter Honestly the best Black PLA+ I have ever used. Meanwell vertical power stand. Printed on my SunLu S8 @.2 layer height 50mms, 205c hotend, 50c hotbed. SoVoL SV01 cura 4.9 profile https://www.instagram.com/p/CPQaw8hhT9U/?utm_medium=tumblr

Printed a baby groguru using GST3D fluorescent filament PLA+ love this company and how well they produce their filament, how they are always ontop of their customer service and their #1 goal to keep your costs down!!!