#excavator hammers
Text
Organic Waste Composter from DCS Techno
We DCS Techno as an Organization believe to give customized and applicable results to our guests. As per our experience, different guests are looking for different results and benefits from this Outfit.
Organic Waste Composter (OWC)
In any kind of Bio- Degradable Wet Waste, 70 of the content is Water and the balance is Solid content. This is the vital principle for working with GREEN BIN. Organic Waste Composter (GREEN BIN) is a fully automatic composting machine that uses special microorganisms to break down and decay all kinds of natural waste into manure with a volume decrease of 85-90. The entire process is natural and natural.
Organic Waste Composter Machine
A Natural Waste Composter machine is a free unit that works with the treatment of the dirt connection and gives better Conditions. It acknowledges wasting as its review and gives banes as its outgrowth. The vital defence against Natural Waste. The composter is to save the climate and for the well-being and insurance of individuals.
numerous kinds of waste can be hurtful and can onus the climate. The organic waste composter will exercise can also appear on land and air pollution which can affect medical severe conditions in mortal beings and brutes.
Benefits Of Organic Waste Composter
Reduces the need for Chemical conditions
Cuts Methane Emigrations from Landfills
Holding dampness and smothering plant infections
Reduces Waste Stream
Conserves Water.
Features Of the OWC Machine
PLC- rested control.
Touch screen HMI (Human Machine Interface)
Alarm for Motor failure.
Alarm for chain breakage.
Alarm for gearbox failure.
The alarm for the cracker addict conked.
Alarm for heater failure.
Pre-filter for crackers increases the life of crackers.
USPs Of the Product
No Manpower is demanded to operate.
No need to add sawdust/ inoculum/ culture.
It isn't simply a shredder but a completely programmed wet waste processor.
Converts waste into order.
The most compact modal in Solid waste operation, takes truly small space as compared to other options.
Garbage volume reduction is nearly 85 to 90.
How to Compost at Home
Composting at home is really simple. I know it may appear at first glance that composting is something that requires expertise, but composting in reality requires very little horticultural knowledge, and just about anybody who wants to do it can compost right at home.
In spite of the way that there are numerous confusions in regards to what you can fertilizer and how precisely you manure, it is truly not anywhere close to that muddled. To make a manure heap, you truly need no unique hardware or information other than a couple of exceptionally fundamental things.
The way composting works is a good start to understanding what to compost and what composting accomplishes. Organic waste breaks down naturally through a combination of processes. Worms, fungi, bacteria, and other microorganisms literally chew up the organic waste. The exposure of organic waste to water and air is also necessary for the waste to be able to be composted.
The trick is to have the right amounts of each ingredient.
The first thing you need is a composting box in which you will be able to dump all your organic waste. Composting boxes are often through municipalities at a low price to encourage citizens to compost. Once you have the right box, you need to make sure you have each of the following in order to allow the chemical and biological processes to function:
1. Sufficient water
2. Sufficient air
3. The right temperature
4. The right carbon-to-nitrogen ratio
Each of these requirements serves a purpose: The water and the air aid the composting processes along.
The right temperature will be quite warm. In a sense, when organic waste is composting, it gets cooked. If the waste is composting properly, it will generate heat. The same heat that you do not want in your fruits, which is why you put them in the fridge is the exact heat that you do want when composting. Heat makes the food go bad, but when you want that same food to compost, the heat causes the pile to compost.
Cooler air stops the biological and chemical processes from happening, which is good to preserve food, but bad for composting. The carbon-to-nitrogen ratio should be about thirty to one. Kitchen scraps, grass clippings, and the like are high in nitrogen.
Sawdust, dry leaves, wood chips, and the like are high in carbon. An equal mixture of these two types of waste should be the ideal ratio for the start of your compost pile. It may sound funny, but let me reiterate that.
You are going to want the compost pile to be half-yard waste and half-kitchen waste by weight. This will give you the correct carbon-to-nitrogen ratio of thirty to one.
The ideal compost box will be one that allows you to control how much water gets in and has ventilation to allow the air to circulate. If you do it right, the compost pile will eventually reach a temperature of about 140 to 150 degrees Fahrenheit. When the composting is basically complete and the chemical reactions begin to slow down, the composting pile should cool down to about 110 degrees Fahrenheit. The final result should look like dirt and have an earth-like smell.
If you are trying to start your compost pile, it can be tricky in the beginning. It is not necessary to run to your compost pile every time you eat an apple or peel a potato. It will make your life a ton simpler on the off chance that you have a re-sealable container under your kitchen sink. This way you can fill it up slowly, and every so often empties it into your main compost pile.
The only thing you need to be sure of is that the container under your kitchen sink has a good seal. Otherwise, the smell might just take over your house and scare away the guests.
It is important to turn the compost pile with a pitchfork or shovel every couple of weeks to ensure that there is proper aeration. You should also make sure that the compost pile is not damp or wet; it should be moist and nothing more than moist.
Too much water will drown the living organisms in your compost pile thereby disrupting the decomposition process significantly. Then again, if there is no moisture at all, they will be dehydrated which will also kill them.
You should also keep in mind that the scraps you put into your compost pile should be cut up into small pieces. Smaller pieces will decompose more quickly than bigger pieces. You should also make sure that your compost box is no bigger than a five-foot cube. If it is any bigger than that, the middle of the compost pile will not aerate properly.
How Do You Make Great Compost?
Composting is a great way to recycle your kitchen and yard waste, resulting in organic fertilizer for your garden, plants, and even grass. There is really no wrong way to compost, but there are a few rules to follow and some advice in order to make the best compost possible.
You really can't go wrong by adding your kitchen and yard waste to your compost pile. All organic material will eventually decompose. However, the best compost is made by mixing small amounts of nitrogen-rich materials, such as kitchen scraps, spent plants, and lawn clippings with large amounts of "dry brown" carbon-rich materials such as fall leaves. Deadfall leaves are filled with trace minerals and nutrients that the tree's roots extracted from deep in the earth.
These minerals and nutrients are missing in ordinary chemical fertilizers that you buy from gardening centres. It is ideal to shred the leaves prior to adding them to your heap to keep them from getting tangled together and hindering oxygen from arriving at all parts of your compost. Dead leaves are one of two things that can be composted all by themselves (the other is barnyard manure, which we will discuss more later).
If you live in a place where fall leaves may not be an option for you or if you have started composting in a season other than autumn and have not stored any leaves from the previous fall, there are a few more options for adding carbon materials to your compost bin, although they will not add as many nutrients as dry leaves.
These are straw (not roughage), cornstalks, sawdust, woodchips, paper, and dried blossoms or plants that have become brown. Make sure that any big pieces are chopped up or shredded and if paper or sawdust are added that you make sure and mix well to avoid matting.
Do not add any bleached paper. Shredded newspaper (black and white sections only) can now be added since the ink is soy-based instead of petroleum-based. However, as I said before if it is at all possible to get fall leaves to do it.
They are the best source for adding carbon-rich material to your compost pile or bin. A great way to have them available all year is to collect leaves in the fall and shred them right away- they will shrink in volume once they are shredded so you will be able to store more that way.
As far as nitrogen-rich materials, grass clippings are a great source although you may want to just leave them on your lawn as this can improve your grass. Another great source is, of course, your kitchen scraps.
This includes any vegetable or fruit waste such as lettuce leaves, uneaten apple cores, and trimmed-off roots. Any item that is large such as broccoli stalks or whole fruits should be chopped up into about one-inch pieces (or at least quartered) before adding it in.
Pieces that are too big will take longer to decompose. Tea bags and coffee grounds (including the filters if they are unbleached) are also good to add in. Coffee grounds are one of the richest sources of plant-feeding, compost-heating nitrogen’s there are. So, if you don't drink coffee at home grab the left-over grounds from the office.
You won't want to leave them out!
Egg shells are an incredible method for adding calcium to your manure. Just make sure that there is no egg left inside- give them a good rinse off, air-dry, and crushing before throwing them in. Egg shells can prevent blossom-end rot in tomatoes, improve the health of your plants, and make vegetables taste better! If you live by a body of water and have access to seaweed add that to your compost as well. Seaweed is rich in micronutrients.
Now that you have a good idea of what you should put in your compost bin, you probably are wondering if there are any things you cannot add or should avoid adding to your pile. Do not add egg insides, meat, bones, fat, dairy, or animal products. However, there is one exception. If you are composting inside a high-quality closed unit, you can include lobster, crab, and shrimp shells.
They are powerfully rich in nitrogen and will get your compost cooking hot. You should also not add charcoal or briquets, coal ashes, contaminated materials, pet or human waste, and plants affected with disease or severe insect attacks where eggs may be present. Ivy and succulent plants, if not shredded or chopped shouldn't be added because they may start to grow in your compost bin or pile. This is the same for pernicious weeds.
Never add weeds if they are in the seeded stage as you may end up with a pile full of weeds and once you add the compost to your garden you may be adding weeds to it as well. Do not add the paper that has been chemically treated such as magazines or juice cartons which may have a plastic lining. You should not compost any nitrogen material alone. You will end up creating more of a garbage dump than compost and produce a horrible smell. All nitrogen-rich materials should be combined with carbon materials.
Although most people do not have access to barnyard animals, manure is a wonderful source of compost. It usually comes with bedding (straw or wood shavings) and has the ideal nitrogen-carbon ratio.
Manure is the only other material that can be composted by itself besides dead leaves. However, this does not include faces from any meat-eating animal. Only include herbivore manure- horses, rabbits, gerbils, guinea pigs, poultry, etc. Human and pet waste will carry too much of the wrong bacteria and will contaminate your pile and then your garden.
Composting is not just about what you put into your pile. It also has to do with water and oxygen. Compost needs the right amount of moisture and air to do its job properly. Now there are two different kinds of composting- both work but there is definitely a difference in the quality. The first is Cold Composting. Cold composting or anaerobic composting is made without oxygen.
It is the "heap everything up some place and at last, it will decay" sort of treating the soil. This way is perfectly fine. For those who don't have a lot of time to spend, but still want to recycle their kitchen and yard waste this is a perfectly fine option and it is certainly better than throwing your organic waste in the garbage. Any organic matter will eventually decompose and become compost. However, this method may create a "garbage" smell.
The second method is Hot Composting or aerobic composting. The centre of a perfectly made pile will heat up to as much as 160 degrees, creating compost in the shortest amount of time possible and killing weed seeds and disease spores. After the compost cools and is reduced in volume by 1/3 to 1/2 it is ready to be checked for "doneness".
When finished it should be like a wet sponge in consistency, dark and rich in colour, and with a nice earthy odour- no questionable smells. In order to create hot compost, you should keep a balance of about 4 parts shredded leaves to about 1 part "wet-green" nitrogen-rich material, by volume. The moisture content should be between 40%-60%.
This means your compost should have the consistency of a wrung-out sponge or look damp and glistening underneath the top layer. Mixing your compost is a great way to increase the flow of oxygen throughout your pile. There are tools on the market that can help with that or compost tumblers that can be turned with a handle that makes mixing a bit easier.
If your compost is not getting enough water or air try poking holes in your pile with a stick or the end of a broom. You can use your hose to add water to those holes. If your pile is too wet add dry leaves or other "brown" material.
So now you know what to add and what to leave out of your compost pile. you also know that you should have a good balance of nitrogen and carbon-rich materials. The key to good composting is the diversity of materials.
Different sizes, textures, and chemical compositions of materials make for better compost structure, drainage, and nutrient content. Most of all you need to have the three main ingredients- Food, Water, and Oxygen- just like any living thing!
Environmental Benefits of Home Composting
Composting is nature's way of disposing of dead organic material. The composting process breaks down the material and transforms it into a nutrient-rich soil additive, which is the perfect eco-friendly fertilizer for the garden. Composting at home is the perfect way for anyone to reduce their environmental footprint.
If all the suitable food waste produced by households in the United Kingdom was composted, it would be equivalent to saving 2 million tonnes of CO2 emissions every year, and the US Environmental Protection Agency estimate that food wastage and garden material make up 23 percent of all U.S. waste.
Home composting can significantly ease the pressure on landfills and alleviate the ever-increasing load on both the water and wastewater systems.
The finished compost contributes to improvements in soil health, which is generally in decline, and reduces the requirement for gardeners to use commercial fertilizers and chemical weed killers, and pesticides.
Up to 45 percent of the contents of the average rubbish bag can potentially be composted. Imagine the amount of space that would be saved in our landfills if this compostable material never got there. Let alone the CO2 emissions that would not be emitted if the material did not have to be transported to the landfill in the first place.
Garden and kitchen waste in landfills decompose slowly and produce significant amounts of methane, a harmful greenhouse gas. For the average consumer, home composting for just one year can save greenhouse gases equivalent to the CO2 emission emitted by a washing machine in three months, including the energy expended to transport the organic waste to the landfill.
The growing popularity of in-sink waste disposal units, which use plenty of water when operating, has introduced more organic food scraps into the wastewater system. This has placed undue, and in some cases critical, pressure on sewer systems and treatment plants, because these have not been designed to cater to the amount of organic waste which is now being disposed of in this manner.
Getting rid of organic waste materials in our landfills or via the wastewater system are increasingly problematic, expensive, and harmful solution, but even more importantly, they result in the wastage of valuable nutrients that ideally would be used to benefit our soil and general environment.
The addition of compost to garden soil improves the structure, fertility, and general health of the amended soil. Compost can even be used to repair problematic soils and can assist in the prevention of soil erosion.
It boosts the ability of garden soil to retain water and increases the soil's nutrient storage capacity, which means that less water and less fertilizer will be required. This results in much better plant growth because the plants have easier access to both water and nutrients for longer periods of time. Healthy soil is essential for growing healthy plants.
Mature compost mulch and so-called "compost tea" are products commonly used as organic methods to control weeds and pests, which reduce the need for other external gardening inputs, such as commercial weed killers and chemicals for pest management.
Ultimately home composting is better than any other way of disposing of domestic organic material and is the most environmentally friendly way to process food and garden waste. The final product from the decomposition process, mature compost, has significant environmental benefits when used in the garden, both as a fertilizer and for organic weed and pest control.
Hydraulic Systems Frameworks and Their Utilization in Present day Applications
Hydraulic creators produce high-quality electricity using the power from the base machine’s hydraulic System. The Hydraulic creator is turned on by opening the hydraulic oil painting oil flux to it. A hydraulic creator is a quiet-running creator that does not need a fresh pump or motor. Installing a Hydraulic creator into a mobile machine increases the vehicle's productivity and net worth.
There is no further need for dragging big separate generators to the work Spots, Hydraulic creator is always on board and ready for use. By installing the hydraulic creator to the mobile machine, the operation rate of the machine increases and there is a lower need for multiple machines on the worksite. pivotal Benefits Always ready for use Saves time, space, and resources further durability Easy installation on all hydraulic systems.
Hydraulic creator produces high-quality electricity using the power from the base machine’s hydraulic System. The Hydraulic Generator maker is turned on by opening the water-driven oil painting motion to it.
A hydraulic creator is a quiet-running creator that doesn't need a fresh pump or motor. Installing a Hydraulic creator into a mobile machine increases the vehicle's productivity and net worth. There's no further need for dragging big separate creators to the work Spots, Hydraulic creator is always on board and ready for use.
By installing the hydraulic creator to the mobile machine, the operation rate of the machine increases and there's a lower need for multiple machines on the worksite. urgent Advantages Generally prepared for use Saves time, space, and money vaults farther progression Simple establishment on every pressure-driven framework.
Hydraulic Systems and Their Use in Modern Applications Hydraulics is the use of liquid to induce force. The liquid may be water, oil painting, esters, and indeed blood- our heart is like an introductory hydraulic system, pumping blood to blood vessels which in turn enable the body to serve.
In ultramodern operations, hydraulics plays a big part as the systems to which they are applied are more featherlight, fluently manoeuvrable, and able of handling unforeseen and rapid-fire changing pets. nearly every major operation relies on hydraulic systems. The fairly easy conservation compared to electrical and mechanical systems has made them necessary in the moment's high-demand world.
In construction, large ministry similar to earthmovers and cranes uses hydraulic systems to lift and move weighty accoutrements. These machines are assigned with shifting veritably heavyweight and though mechanical and electrical systems also work, the time and trouble taken to move thunderclaps, for illustration, would be vastly longer. Hydraulic systems produce invariant force to selectors and motors so work is fulfilled briskly and with lower room for error.
Away from heavy ministry, hydraulic systems are applied to tools similar to sayings, impact wrenches, and post-pullers. The commotion produced is decreased as is exhaust. In aeronautics, the aeronautics assiduity utilizes hydraulic systems on an expansive scale. Large aircraft use two or further systems to power factors like wheel thickets, windshield wipers, flaps, and weight doors among numerous others.
Since the proper working of a hydraulic system depends on precise temperatures, heat, and zero fluid impurity, strict checks are made to ensure that all conditions are met and maintained. Consider the checks conducted previous to take-off.
Technicians and masterminds examine and test all vital factors- not only hydraulic but electric and mechanical- so that aircraft do not stall, fly with no issues, and land easily. In manufacturing shops diligence and manufactories produce massive volumes of products.
You can well imagine how important power is demanded to operate the machines. Hydraulic systems deliver power to motors, faucets, and selectors to enable the ministry to operate. The thickness they give means that processes that carry on with smaller crimes and productivity is maintained. In automotive may be the most well-known use of hydraulics is in automotive assiduity.
numerous machine manufacturers have made hydraulic thickets standard as they've better retardation power and modulation and handle heat well.
Of course, they are more precious and must be maintained well as a fluid impurity can hinder performance but the overall benefits overweigh the downsides. Another illustration is dump exchanges which use a portable bed to dispose of trash. This movement is made possible due to one or a brace of hydraulic cylinders.
In transport outfit Transport outfits like lifts and escalators make wide use of hydraulics. They do not need large motors to induce the required force and speed is still maintained if there is a leak or power shuts down. The lifts do come with their failings in that leaks can develop but safety measures like installing PVC coverings around cylinders have made them much safer than ahead.
These are only many exemplifications of what hydraulic systems are used for. There are multitudinous other operations that earn citations but listing all would fill a folder. The nethermost line is that they are suitable to induce further force, enhance projects, and are featherlight compared to other types of systems.
The excrescencies they retain are in the process of being smoothed and judging from how numerous operations calculate on hydraulics, it is not likely to be phased out anytime soon.
Machines That Employ Hydraulic Use
Since the beginning of time, man has been using machinery and tools to improve his quality of life and perfect work efficiency. We are the only species on earth with the intelligence to design and implement tools that are able to assist us in our daily tasks.
Over the past generations, technological advancements have improved the tools we use today, and have continuously revolutionized industries through each generation, in particular those of the past 150 years.
The hydrodynamics business specifically can be credited with essentially influencing and changing the essence of human apparatus until the end of time. Hydraulic systems are tools and machines that rely heavily on high-pressure liquid power to fulfil their functions.
The state of purity of this liquid is crucial to be able to perform its purpose, which means the hydraulics liquid has to be run through an oil distillation system to filter out any impurities.
Wide varieties of cylinders and motors will transfer this hydraulic liquid by means of control valves, hoses, and tubes to the cylinders and motors.
A lot of machinery used to perform important functions in our everyday use makes use of hydraulics in their function. Bulldozers, which are classified as crawlers, move making use of rigid plates joined to each other set on wheels, using continuous tracks.
The purpose of this continual track movement is to allocate the mass of the machine over a much larger surface than mere wheels would be able to dispense. The bulldozer comes equipped with a 'dozer blade. Even though a bulldozer is a term assigned to various types of machinery, the correct use of the term is only to describe a tractor with a dozer blade.
This blade is utilized in moving debris, sand, and soil, especially in construction work. In the first bulldozers, the blade was controlled by a brake or winch system. They are now fitted with hydraulic cylinders, allowing much more exactitude in the blade's operation. Another piece of machinery that uses hydraulics in its function is a backhoe. It is a kind of excavating tool commonly referred to as a digger.
In essence, it is a tractor, fitted with an articulated arm with a digging bucket at the end, used in excavation scenarios. The arm which is closest to the vehicle is referred to as a boom, and the other part of the arm is the dipper. The can and the arm are controlled by refined and exceptionally created power through pressure that considers precise development.
Forklifts are powered by hydraulic systems as well. Such machines are powered by industrial trucks which are used in the lifting and transporting of heavy materials, especially moving and lifting pallets in warehouses and stock distribution centres.
The mast of the forklift is what performs most of the work in raising and lowering the loads. It is obvious that hydraulics is used in our daily lives, even if we don't see them in our every day.
Hydraulic oil painting Basic Information and Types
In utmost artificial machines, construction machines, aircraft, automotive, and marine operations, there's the use of hydraulic systems. Hydraulics refers to the medium of using fluid to induce power or force to do the asked task by a machine or system.
No hydraulic system can operate without using hydraulic oil painting. oil painting is the fluid used to give power to hydraulic systems. This oil painting is principally made of an introductory oil painting that's combined with other complements like anti-wear complementation-oxidants, cleansers, anti-foaming agents, etc.)
There are different types of canvases in hydraulics which we're agitating below
Mineral oil painting This is an unnatural oil painting or mineral-grounded oil painting. This oil painting is of minimum expenditure and is effectively accessible. This is one of the generally used oil paintings as it serves nearly all the parcels of hydraulic oil painting. The disservices are low imperviousness to fire and low biodegradability.
Phosphate ester oil painting This type of oil painting is principally phosphate ester grounded, which is formed by the response of two substances phosphoric acid and sweet alcohols. This oil painting has parcels like veritably good fire resistance. Its downsides are low comity with bonds, aquileges, and polymers and it's also poisonous.
Polyol ester oil painting This is another synthetic oil painting formed by adipose acids and synthesized alcohol responses. This oil painting has good lubrication parcels and is fire-resistant. It's expensively varied with different canvases yet veritably climate cordial.
Water glycol oil painting This oil painting consists of 35- 60 of water in form of results and complements. It's largely fire-resistant, biodegradable, and non-toxic. The introductory debit is that there's damage to hydraulic oil painting parcels with water evaporation.
Vegetable oil painting This hydraulic fluid is made substantially from Canola oil painting. It's analogous to polyol esters in chemical structure. It has good lubrication parcels, non-toxic and biodegradable. Its main debit is its low oxidation resistance.
Why Hydraulic Systems Are Considered Superior
Numerous frameworks today depend on water power to perform various assignments. Unlike mechanical systems which need solid components to move other parts, hydraulics relies on fluids and the force generated by them.
What's so special about hydraulics, especially since the same results, more or less, can be achieved through mechanical, electrical, and pneumatic systems? The answer lies in the strength of fluids and how they can turn a relatively weak pump or similar component into one that generates force many times the original amount.
Pros of hydraulic systems
Fluids flow smoothly and this feature is applied to systems and heavy equipment. The force generated by hydraulics produces very smooth movement which is invaluable in applications where jerky motions cannot be tolerated.
The second feature of such a system is load-bearing capacity. Unlike pneumatic systems that rely on compressed gas, hydraulics is able to bear much heavier weights as it's incompressible. It does it smoothly too, something pneumatic systems can't achieve as the air pressure alters with cylinder movement and load changes.
Moreover, the amount of force required to generate the same produced by a hydraulic system is much more. This can translate into higher expenses as larger and more powerful components carry heftier price tags.
In terms of energy, hydraulics uses a lot less when compared to others like pneumatic systems. Heat loss is also less which means not much energy is used to generate the required force.
Since such systems are typically used in large-scale applications in settings like factories and plants, it becomes important to cut corners without compromising quality and production volume. Hydraulics allows this while combining all the other benefits mentioned above.
Cons of hydraulics
While there are several benefits to using hydraulics there are also cons. This shouldn't be a deterrent but should rather give us an understanding of what to expect.
Since hydraulics relies on fluids, there's a chance of leakage. Not only does this reduce the efficiency and power of the system but it causes a mess. Since many systems and components require clean environments and surroundings, there's a chance that the leaking fluid may cause damage and fire hazards.
Bear in mind, however, that since this is a known fact, steps are always taken to ensure that accidents don't occur. The hydraulic systems themselves are designed in such a way that they pose little danger to you and to components even during leakage.
The fluid used in these systems must be clean as contaminants can clog pipes. However, it's possible that pollutants can enter in which case efficacy can be reduced. The environment or setting must, therefore, follow strict sanitary standards during all points of the manufacturing process.
Like all systems, hydraulics has its benefits and drawbacks. But at a time when bulky components are beginning to be edged out in favour of smaller and more efficient systems, hydraulics trumps. Pneumatic and electrical-based machines and components work well too but they require a higher source of power or larger pumps to generate the same amount of force given out by a hydraulic system. For manufacturers and users requiring such high output, relying on hydraulics is more cost-effective. Production time is reduced as efficiency maintains a high average.
Operations of Crushing Bucket in The Quarrying Industry
DCS Techno Offers a Bucket Crusher with a flexible, provident, and effective result for Crushing and webbing conditions at Construction Jobsites, Stone chases, and also in obliteration operations. Pail clinchers are an innovative answer to Crushing conditions on moment’s Worksites.
Using the pail clincher all types of inert annihilation material can be crushed and reused on point. During the Crushing Process, the pail clincher is deposited vertically so that the bedevilled material can be released.
The mobile crushing outfit has come decreasingly popular in recent times in quarrying operations, offering a tremendous quantum of inflexibility. Although static crushing shops and outfits still continue to enjoy a crucial function in the quarrying assiduity, due to their capability to reuse high capacities, mobile crushing has distinct advantages over its stationary counterpart.
One option, which gives indeed more versatility for certain operations, is a crushing pail for an excavator. These are hydraulically driven and can be fluently attached to the utmost excavators. Crushing pails are generally perfect for crushing inert gemstones and waste accoutrements directly on point, including gemstones, hardcore, gravestone, pipe, concrete, glass, and asphalt.
This allows immediate on-point recycling and exercise of waste accoutrements. They're ideal for a range of operations and are generally used in mining, quarrying, construction, obliteration, recycling, and landscaping diligence. There are multiple reasons to crush waste on point and some of the main reasons for doing so are listed below.
The main advantages of a crushing pail are It crushes accoutrements directly on point
· Only one pail is needed to demolish, crush, reclaim and load accoutrements ·
· It reduces the use of mechanical pieces in the outfit
· It solves the problem of having to dispose of obliteration accoutrements offsite
· It cuts down on time, transportation, and force costs
· It's ideal for small and large worksites
· It allows accoutrements to be reclaimed, performing in significant savings
· It offers enhanced driver safety, reduced transport costs, and quick installation and transfiguration
· It's much further protean than traditional and clumsy crushing factory
It can be used to load accoutrements directly onto a truck, barring the use of another pail demanded with traditional clinchers
A crushing pail can round large mobile clinchers on the wheel by offering further inflexibility. It's a useful and must-have piece of outfit for people who work in special locales similar to chases and mines, or at any worksite of a complex nature.
The crushing pail can be used as a reciprocal tool for primary crushing, and can fluently be transported together with the operating excavator. Using the pail, you can crush accoutrements anywhere,
from steep areas to worksites with extremely delicate conditions (marble chases, gold mines). Crushed accoutrements can be reused on-point or loaded/even crushed directly onto exchanges so that they can be hauled to other locales or delivered direct to guests, barring a lading stage in the crushing process.
Special Considerations for the Mining and Quarry Industry
As an assiduity that puts a lot of physical demands on the outfit it uses, the mining and chase diligence bear the further sword and sword plate than other diligence might need. Impact resistance and wear resistance are rates that are especially important in the sword wear and tear plate being used in mining moment.
Industrial- quality wear and tear corridor give the long-life mining companies need to carry them through their peak product season. In fact, with superior sword wear and tear plates as a part of their operations, miners can enjoy the peace of mind that comes from knowing they will witness no expensive loss due to an inordinate time-out.
Fortunately for them, wear and impact- the resistant sword is tough and dependable for indeed the most demanding mining jobs. It can resolve sword wear and tear problems in a host of operations in both underground and face mining.
Whether the task is material running, digging, hauling, crushing, or sizing, miners can depend on sword-wear and tear plates to cover their outfits and get the job done right.
In an assiduity like mining that involves a lot of outfit wear and tears and gash, only decoration-quality sword and reliable service from a sword wear and tear plate provider will do.
In fact, these legs-up are one of the only ways to stay running and competitive in the ultramodern- day mining request. Bruise-resistant, impact-resistant, and wear-resistant swords take solicitude over one's nethermost line out of the equation.
These types of sword wear and tear products nearly exclude misplaced product time due to worn corridor that hinders mining outturn during the peak product season. They also reduce conservation cycles and keep miners' product affairs flowing. At the same time, quality sword plate cuts spending by reducing the need for frequent conservation and servicing of colourful mining corridors.
And because smaller mortal coffers need to be devoted to similar conservation tasks, indeed further plutocrat is saved. sword wear and tear plates with unequalled impact and bruise-resistant parcels can be put to good use in a wide range of mining and chase operations.
Everything from bin liners, waterfall liners, clincher main frame liners, knife blades, slumbered blades, and drag pail liners to dragline legs in relation and pails, horrible bars, haul truck bed liner accoutrements, hopper liners, links, long wall miner bed liners, haul pail liners, primary, secondary and tertiary clincher liners, ripper bars, rotary swell grates, and shovels can profit from fabrication with high- quality bruise resistant sword plate.
What's Rock Crushing?
Rock crushing is a process used in construction, mining, and aggregate assiduity. As the name suggests, it involves breaking down gemstones into fine, small pieces. The process generally involves several major pieces of the outfit. A haul loads the clincher with the large pieces of the gemstone. The clincher cannot crush boulder-sized monuments.
The ideal size is about that of a ball. There's a clincher that crushes the gemstone into lower sizes and feeds the persecuted material into another machine called a gemstone screener. The job of the screener is to size the gravestone into piles of different sizes. There are generally three sizes of gravestones produced. One is a 1- 2" gravestone, another is generally called clincher run and another is ¾" clay.
There are a number of factors that impact the crushing process. Some of the factors affecting the crushing rate are hardness, material resistance strength, size, shape, viscosity, and moisture. There are some external factors too similar to the commerce and distribution of accoutrements when crushing is conducted.
In crushing, the external force has to be great to overcome the binding force between the gemstone patches. The structure of chargers in the gemstone determines how strong the cohesion is in the gemstone.
There are three stages.
1) Splintering stage where energy immersion takes place and the gemstone is crushed into many large pieces.
2) Squashing stage, where huge pieces are additionally squashed
3) contraction stage, where distance pieces are broken. This stage produces small chucks.
jewels are crushed on construction spots and in chases. jewels are fully crushed on obliteration and recycling spots. shovelled jewels on job spots that may else be regarded as a waste product can be turned into profit with crushing.
Crushed gemstone can latterly be used in concrete, in the construction of roads, as filler material in erecting foundations, for corrosion control, as driveways, to bed pipelines for underground serviceability, in asphalt foundations under pavers, and in landscaping.
frequently not realized by utmost people, the crushed gemstone is used as a foundation under concrete crossbeams, and under the asphalt on all roads and roadways and is an integral element of any type of construction. numerous excavation companies that shovel gemstones also have movable gemstone clinchers to crush the shovelled jewels on the job point.
The shovelled gemstones on a Jobsite shouldn't be discarded as they can always be turned into a useful product. Crushing gemstones on the Jobsite saves plutocrats in two ways. Crushed gemstone is always in demand on job sites. However, there's no need to buy crushed gemstone from a chase or go to the expenditure of hauling gemstone onto the Jobsite for concrete and asphalt, If the gemstone is crushed onsite.
However, there's also no need to haul off the excess, If the product is used onsite. It's also further environmentally friendly to use the onsite product.
There are several different machines that crush jewels. Some of the clinchers include jaw clinchers, cone clinchers, impact clinchers, and comber clinchers. substantially, gemstone or the raw material is fitted into these machines through the hopper on top.
The persecuted material comes out from an opening at the bottom of the machine. New kinds of machines offer crushing on the point which offers increased convenience to contractors. They also have advanced effectiveness and a wide range of contraction strengths.
Rock Crusher Maintenance
Know When It Is Going to Go Down Just as is the case with nearly anything, the most likely time that gemstone clinchers break down is when you'll need to get the most out of them. As it is, you no way realize how important a commodity is until you don't have it, or when it's utmost needed.
In order to skirt high form costs and product loss, proper journal conservation of gemstone clinchers is needed. The most logical thing to do in order to maximize the clincher's life is to establish and execute a plan that will increase the life of the clincher thereby reducing form costs and adding to the affair. This can be done by laying down a gemstone clincher conservation schedule that's stuck to. The following are five ways to help achieve the thing.
1. Know and follow the Rock Crusher Constraints Every machine has many reservations and this applies to a gemstone clincher as well. There are principally three limitations that are particularly important to be kept in mind while operating a clincher i.e., the power, volume, and crushing force. It's a load if any one of these limitations is exceeded during operation.
The driver needs to take into consideration the type of gemstone being crushed and environmental conditions as this too may change the gemstone clincher's limits on the cover. By forcing the clincher to go beyond limits and stressing out different aspects of the machine, the lifetime is dropped and the time that it has between repairs and failure is docked. All this leads to further form expenditure, more man-hours, reduced affairs, and in many cases endless failure of the machine.
2. Familiarize yourself with the conservation Needs of your Rock Crusher As with all mechanical machines, conservation is demanded and must be followed. Rock clinchers are no different. There are three types of conservation that one must follow to duly maintain the clincher. They're-preventative conservation, Prophetic conservation, and Reactive conservation.
preventative conservation This type of clincher conservation plan needs to be on a schedule and followed to keep up the clincher's life. Following the manufacturer's conservation primer should be the rule in this case. This includes looking after the factors like clincher liners and other wearing factors for their good health.
By not changing the liners in the clincher as they come less and less effective, you won't only be losing plutocrat because of poor/eschewal-of-spec product but also on labour as well since the driver will still be there for the same quantum of time, but doing much less crushing. Also, the eschewal-of-spec or large material may circulate in an unrestricted circuit to further, increase the cargo on the formerly deficient clincher.
Prophetic conservation This refers to covering the condition of the gemstone clincher while it's in use. This is done by using prophetic conservation tools, similar to slicking oil painting thermometers, lube oil painting pressure needles, slicking oil painting sludge condition index bias, lube oil painting analysis, clincher drive motor ammeter, and diurnal driver crusher log wastes.
These are used to determine the normal operating specs of the clincher. This will allow seeing when effects aren't running duly and allow proper and corrective action to do. Reactive conservation This conservation occurs when the clincher isn't operating duly and it's decided it's time to fix it. In other words, staying until it's broken in order to maintain it. This ought to be viewed if all else fails and be stayed away from.
3. Root Beget Analysis Identify and apply corrective measures to the root cause because of which the gemstone clincher is facing issues. This can be veritably cost-effective in the long run as it'll minimize the rush of the problem. Root cause analysis not only helps in bridging the current problem but also in vaticinating the eventuality of an incident. therefore, corrective measures can be enforced well in advance.
There are numerous different ways and tools for conducting root cause analysis like gathering data, checking the driver's chops and knowledge, examining the machine and end product, machine placement, forces of nature, conservation processes, etc. Once the root cause is linked, establish the corrective measure plan which will best suit you to achieve your pretensions. The shadowing of corrective measures can be proved in the form of dashboards for the staff.
4. Design and apply a Hand Training Plan Numerous problems that would do with a gemstone clincher can be averted if workers are trained duly.
workers can be trained on a one-to-one base or through a group session. Group sessions are more judicious if a new fashion or process has to be communicated to workers. The hand training program should be designed in such a manner that it keeps in mind each hand's requirements and current skill status.
Proper training of workers increases their morale, confidence in operating the clincher, and their effectiveness to work and decreases hand development. Which in turn leads to a better working machine and an increase in profit over the long run.
Hand training isn't a one-time job rather it should be done periodically so that each person is well-equipped with the correct and updated knowledge of the operation and conservation of the gemstone clincher.
Large-Scale Mining Vs Small Scale Mining
Mining, simply stated, is the birth or junking of minerals and essence from the earth. Manganese, tantalum, bobby, drum, nickel, aluminium ore, iron ore, gold, tableware, and diamonds are some of the particulars generally booby-trapped.
It's worth knowing that mining is a plutocrat-spinning business where not only do booby-trap companies prosper but the government also collects huge earnings.
It's common knowledge that minerals and essence are veritably precious goods and in great demand. It's to be noted that manganese is a crucial element of the low-cost pristine swords. It's also used to de-colour glass by removing greenish tinges.
Tantalum is utilized in mobile phones, pagers, and workstations. Cooper and drum are used to make pipes, cookware, etc. Dispensable to say, tableware and diamonds are used to make jewellery. Mining is generally of two orders-Large Scale mining and Small-Scale mining.
Large-scale mining is generally accepted by big companies using numerous workers and a huge labour force. The company mines at large spots and continues the operations until the mineral or essence is fully shovelled. One classic illustration of a large-scale mine, that one readily remembers, is the Serra Palade mine in Brazil which yielded,000 tons of gold from 1980 to 1986 and employed,000 workers.
Small-scale mining is done by a fairly small group of wandering men. They travel together and identify spots they suppose will yield gold or any other precious essence or mineral. Small-scale mining occurs in places similar to Suriname, Guyana, and Central Africa among other places. Some experimenters believe that small-scale mining is more dangerous to the terrain and causes more social problems than large-scale mining.
There's no denying that both large-scale and small-scale mining are generally veritably destructive to the terrain as mining is one of the principal causes of deforestation. Trees, shops, and all foliage are cleared and burned to make the ground fully bare for mining operations.
Large-scale mining also involves using huge bulldozers and excavators to prize essence and minerals from the soil. Further, to merge the lines, they use chemicals similar to cyanide, mercury, or methylmercury.
These toxic chemicals are relatively frequently discharged into gutters, aqueducts, kudos, and abysses. This contaminates all living organisms within the water body and the people who depend on the fish and other ocean brutes for their main source of livelihood are poorly affected. Small-scale mining is inversely ruinous to the terrain.
Groups of 5- 6 men resettle from one mining point to another in pursuit of precious essence, particularly gold. There are two types of small-scale mining land dredging and swash dredging.
Mining affects the health of the people as they're exposed to poisonous waste from the chase. They develop skin rashes, headaches, puking, diarrhoea, etc. and the symptoms of mercury poisoning are veritably analogous to the symptoms of malaria. utmost, unfortunately, numerous people who can't go to go to a croaker, or who live in a villa where a croaker isn't available are frequently not treated for their illnesses.
However, people can't use it for bathing, or cuisine, If the water is defiled. Mining regularly occurs in numerous places around the world, including the U.S. In South America, mining is extensively rehearsed in the Amazonia region, Guyana, Suriname, and many other countries.
In Focal Africa, mining crushed a Public Park called Kahuzi-Biega in the eastern Majority rule Republic of Congo (DRC). South Africa is internationally known for mining diamonds. Mining also occurs in Indonesia and other S.E. Asian countries.
How Does Mining Affect the People?
Mining is destructive to the terrain as trees and foliage are cleared and burned for mining. Natural minerals and essence are stripped from the soil.
In fact, mining is one of the causes of deforestation. When the terrain is drastically affected, naturally the people will be affected. The mining recesses dug during land dredging mining remain as stagnant water pools serving as a parentage ground for mosquitoes and other water-born insects.
People living near similar water pool areas have a high possibility of getting water-borne conditions similar to malaria. The clay, slush, and jewels displaced during swash dredging mining disrupt the natural inflow of the swash. As a result, fish and other submarine-living organisms frequently die and fishers find it veritably delicate to navigate in the dammed gutters.
Beach and clay mining may occasionally pave way for polluting the groundwater. Chemicals used during the mining process beget pollution to the terrain, creatures, and people. The chemicals similar to cyanide, mercury, or methyl mercury used to merge the essence and minerals uprooted by mining are discharged into gutters, aqueducts, kudos, and abysses therefore polluting the water bodies and the submarine organisms similar to fish living within the water bodies. People who consume similar defiled submarine organisms are prone to serious health hazards.
The polluted water cannot be used for bathing, drinking, cuisine, or washing clothes, therefore creating a water failure problem for people living hard. The poisonous waste from mine tailings flows into either an abandoned mining hole or conterminous timber in the case of land dredging and pollutes the swash in the case of swash dredging.
The people who are exposed to the poisonous waste from the chase suffer health problems. They may suffer from skin rashes, headaches, puking, diarrhoea, etc. Some mining involves the unintentional disbandment of heavy essence, similar to lead, into the atmosphere. This can have serious health goods similar to internal deceleration in children.
Asbestos dispersed into the terrain during asbestos mining is life-changing for original residents and workers. People living near mining areas or mining townlets are veritably much disturbed and affected by the impact of mining.
Theft, medicines alcohol, harlotry, rape, artistic declination, and sexual abuse are unfortunately some of the worst problems of people living in mining areas. The poor people who face the health problems of mining cannot go for medical treatment, or the people who live in remote townlets where a croaker isn't accessible remain undressed for their ails.
The mining drivers and their families may also face problems. The miners also have life pitfalls when they're working in the mine. The family of small-scale miners may suffer from fiscal and protection problems as the miners leave their families in hunt of work.
The effect of each proposed mining process on the terrain should be anatomized before granting authorization to do to mine. For illustration, the mining and use of asbestos are banned in the utmost corridor of the world life as asbestos dispersed into the terrain is life-changing for people several times.
therefore deforestation, mineral/ essence reduction and chemical pollution due to mining can have an inimical impact on the terrain, submarine territories, people, creatures, and of course the mining drivers. Mining drivers must be apprehensive of the impacts of their mining operations, borrow tone- safety measures, and insure minimal threat to the terrain and people.
Development in Mining Technology
The development of mining technology plays an important part in mining assiduity as well as in the terrain. Mining assiduity plays a pivotal part in our frugality. The mining assiduity was veritably conservative in initiating and espousing new technologies in history due to high capital conditions, environmental limitations, and small profit perimeters.
still, the mining assiduity has made significant progress in productivity, mining technologies used, environmental control, and worker health and safety. The mining assiduity has also introduced bettered clean technology to carry out stylish mining processes and practices. similar practices have been applied in developing countries which achieved stylish results.
When booby-trapping technologies come more extensively available, there will be only a technology gap between mining diligence and countries.
Mining diligence continues to play its essential part in sustainable technological development to ameliorate their performance, reduce environmental pollution to all media and enhance the quality of life within their functional work area.
The mining assiduity aims at espousing and enforcing innovative technologies through the operation of both mining and environmental technologies to produce better environmental quality in mining assiduity areas, reduce negative impacts on mortal health and the terrain, and reduce water and air pollution, and land declination. utmost of the recent developments made in mining technologies prove to be cost-effective and terrain-friendly technologies.
For illustration, Detergent- birth/electro-winning (SXEW) is a hydrometallurgical process that differs from the traditional system of producing bobby by milling, smelting, and refining. The development of the SXEW process helps in the low-cost production of bobby from waste and raw ore dumps of bobby minerals shovelled from bobby mines. SXEW helps the United States and many other bobby-producing countries veritably.
EESTECH provides environmentally sustainable technologies that have direct operations in the world's coal mining and energy diligence.
EESTECH's Hybrid Coalmine Gas Technology (HCGT) is an honoured Clean Development Medium (CDM) that uses waste coal and voiced coalmine methane as an energy source to produce cost-effective clean coal energy. Clean coal technology offers results in the fight against global warming.
The development of new mining technologies helps to reduce product costs, enhance the quality of booby-trapped essence and minerals, enhance the quality of goods using booby-trapped minerals, and reduce adverse environmental goods, and health and safety impacts.
therefore, the mining technological developments profit consumers and directors, as well as the nation's frugality, public defines, health, and social well-being.
The most advanced and developing countries have formerly assessed environmental norms for emigration, effluent, groundwater impurity, and hazard and poisonous operation guidelines. But because of weak law enforcement, lack of monitoring capability, and professed mortal coffers, the mining assiduity doesn't observe.
Hence, the environmental norms must be harmonized within developing countries in order to ameliorate the environmental performance and operation of mining diligence.
Political and social institutions could ply enormous influence over the mining assiduity's development. Political Institutions including the central government, original government, and public decision-makers must produce transnational adjustment of environmental norms for better positioning for global competitiveness in mining products. Doing so will ameliorate the commercial image of the mining diligence as well as benefit global consumers.
Workshops and training programs on pollution control and dimension ways of mining conditioning and the development of networks among mining cooperation associations should be carried out through externships and specialized backing in mining diligence.
Excavator Rental Service - A Four-Step Guide
Using an excavator rental service provides the benefits of today's multi-purpose machines without having to purchase one. Whether you really want it for business work or a private undertaking, leasing a tractor isn't as convoluted as you would suspect.
First, determine what size you want. The larger the excavator, the more powerful it is and the wider and deeper it can dig. However, this also means a greater operating weight - 17,000 to 100,000 pounds or more - that a site must accommodate.
Smaller models weigh from 2000 to 18,000 pounds, making them better suited to a wider range of work surfaces. They also fit better into tighter spaces, sometimes narrow enough to get through a door or gate. However, they have less digging depth (up to 14ft) and less horsepower (up to 40hp).
Second, decide which attachments you want. Common attachments include bulldozer blades, hydraulic hammers, augurs, and thumbs. While attachments typically are a separate rental, they increase the capabilities of the excavator and make the job go faster, potentially decreasing the amount of time the excavator must be rented for.
Third, call companies about availability and compare prices. Excavator rental rates will differ among agencies. Mini excavators rent from around $200 per day to $3000 a month. There is a greater range for full-size ones: $350-$1000 per day, $1250-$5000 per week, and $4000-$15,000 per month. Remember that usually, each attachment will come with its own per-day price.
Inquire about additional fees, including the deposit, which will usually be larger for longer rentals. Most agencies will require an insurance fee or proof of cargo insurance if you will be hauling the equipment.
If they are bringing it to you, delivery fees run around $50 with an additional mileage fee of $3 or so per mile. Also, ask about other rental policies. Some may have a minimum rental period such as two days or a week on certain models.
Fourth, be safe. Have all the appropriate safety gear available and look over the manual and safety instructions. A few rental organizations might have extra preparation and security materials that will assist you with utilizing your tractor rental accurately, shrewdly, and proficiently.
Important Tips When Purchasing a habituated Excavator
There's a major distinction while copping an alternate-hand or employed tractor; a commodity like 25 to half of the expenditure is the distinction from the new backhoe. likewise, someone must be careful; though an alternate-hand excavator is cheaper it can bring big during repairs. Hence, the total quantum of cost can make it not worth copping.
The physical check is generally done in two phases; the visual physical check and the operation or performance check. Stage I-Visual fleshly or physical examination.
The following are the effects to be checked in this stage Machine- If examining the machine, you must search around the cube of the machine for any signs of soot that comes from the bank. Any sign of soot will signify that there's a need of catching the machine. Check also for any suggestion of oil painting leakages in the machine or neglect.
After that, examine the battery for any deterioration. You have to check also the system of the air cleaner to make sure that they're performing.
Any little volume of dirt or dust may beget damage to the machine. also, check the cooling scheme, and see to it that the cooling addict belts are firm and the radiator is clean because it'll destroy the cooling and air system which may beget the machine to heat.
Hack, Boom, Stick, and Pail- a well-maintained excavator will manifest the following signs the hack innards are fine condition and major damages aren't suffered by the body. Slight scrapes and gashes are usual in employed stuff in any case.
After that, examine the pail, and be sure no pail is set up underneath. However, also it shows that the outfit was used to drive needles and forging of hard jewels alongside excavation If you set up any. therefore, because of these, there's an occasion that the outfit is subordinated to jobs beyond its capability.
Next, test the revolving points and search for any wispiness between the bushing and the legs. Any slackness might indicate the necessity
for negotiation after copping it. The most important spinning point is between the body and the smash. check the smash by means of straight edging and also the spoon stick in order to ensure that they're crooked or fraudulent.
When checking the tracks, find out the extent of wear and tear and if some connections that connect all the single essence plate tracks have experienced a gash or broken. While checking the undercarriage and track, check the position of the oil painting and chastity in the final drive.
Find out if there are leaks or wear. ensure that there's no water or any foreign patches outside. Eventually, check the comber essence structure for any suggestions of fixes or breaks, which are the consequence of welding.
Stage 11- Operation/ Performance examination This is the stage wherein the machine of the excavator starts on and after warm-up. Ask for a demonstration of the movement of the stick and smash. This is the right time to find out for any slackness, which generally signifies that bushings need relief. check also the hydraulic cylinders as well as the tubes.
ensure that the tubes aren't damaged or bent. Next, examine the performance of the tracks if they're revolving inversely. Incipiently, make sure of the performance of the sway system which includes the bearing as well as the gears.
The system must be suitable to revolve the hack. It must start efficiently and directly. Any suggestion of slackness requirements concern, it's intimidating. Check the performance of the swing both clockwise and also counter clockwise direction.
To know more information about Organic Waste Composter, Hydraulic Generator, Excavator Hammers and Bucket Crusher
Contact us:
Plot No 169, Road No.11,
Prashasan Nagar,
Jubilee Hills,
Hyderabad,
Telangana – 500096
+91-9849009875
0 notes
Photo
Cracking up rocky layers
8 notes
·
View notes
Text
MTB 505 Hydraulic Breakers Seal Kit for Kubota Case Caterpillar Hitachi Bobcat Gradall Komatsu John Deere Liebherr Excavators
MTB 505 hydraulic breakers hammer seal kit for Kubota, Case, Caterpillar, Hitachi, Bobcat, Gradall, Komatsu, John Deere, Liebherr, excavators is stock available.
This comprehensive kit includes all the seals you need to rebuild your MTB 505 hydraulic breakers hammer, including:
Piston seals
Guide seals
Cushion seals
O-rings
Backup rings
Benefits of using the MTB 505 hydraulic breakers…
View On WordPress
#BOBCAT#Breaker#CASE#CATerpillar#dozer#excavator#G90#GRADALL#Hammer#Hydraulic#JOHN DEERE#Kit#KOMATSU#Kubato#Liebherr#MTB#MTB 505#MTB505#Rammer#rock#Seal
0 notes
Video
youtube
Powerful Tools, Precise Results Demolition Hammer & Mini Excavator Rentals
0 notes
Text
Contact us for construction equipment and attachment on rent. We are Importing and renting of construction equipment and attachments, heavy breaker, medium breaker, small breaker, general crusher, pulverizer, compactor, hydraulic quick coupler etc. Call now to book an appointment : 8224848777
#jcb 3dx breaker price#bti rock breaker#breaker attachment for backhoe#backhoe breaker attachment#jcb rock breaker price#backhoe hammer attachment#breaker attachment for excavator#backhoe hydraulic breaker#excavator breaker attachment#hydraulic clamshell#backhoe hydraulic hammer#backhoe rock hammer#backhoe loader breaker#jcb hydraulic breaker
0 notes
Text
In the weeks since Hamas' Oct. 7 attack, Israeli airstrikes on the Gaza Strip have killed more than 15,000 Palestinians, according to Gaza's health ministry, and destroyed thousands of homes in the territory.
And there have also been tremendous losses to the region's ancient and globally significant cultural heritage. The region was a hub for commerce and culture under Egyptian, Greek, Roman and Byzantine rule. It remained influential for centuries thereafter.
A recent survey by the group Heritage for Peace details the damage done so far to more than 100 of these landmarks in Gaza since the start of the present conflict.
The casualties include the Great Omari Mosque, one of the most important and ancient mosques in historical Palestine; the Church of Saint Porphyrius, thought to be the third oldest church in the entire world; a 2,000-year-old Roman cemetery in northern Gaza excavated only last year; and the Rafah Museum, a space in southern Gaza which was dedicated to teaching about the territory's long and multi-layered heritage — until it was hammered by airstrikes early on in the conflict. (...)
"If this heritage be no more in Gaza, it will be a big loss of the identity of the people in Gaza," said Isber Sabrine, president of Heritage for Peace, in an interview with NPR. (...)
"The people in Gaza, they have the right to keep and to save this heritage, to tell the history, the importance of this land," he said.
The 1954 Hague Convention, agreed to by Palestinians and Israelis, is supposed to safeguard landmarks from the ravages of war. But landmarks in Gaza have been destroyed by Israeli strikes in earlier rounds of fighting. Dozens of sites, including the now-obliterated Great Omari Mosque, suffered damage in 2014. A report by UNESCO, the United Nations body that designates and protects World Heritage sites, cites further destruction to cultural and historic sites in Gaza in 2021. (...)
Destruction of historical sites and other cultural sites is part of genocide, it's the destruction of the proof of a people's relationship to the land and a horrible emotional blow at the community. UNESCO must act immediately against Israel's destruction of Palestinian heritage, and every country and international organism must expel Israel and impose sanctions to make the genocide and apartheid end.
#💬#palestine#gaza#israel#free palestine#world heritage#cultural heritage#historical sites#archaeology#cultures
2K notes
·
View notes
Photo
5 Traits Of A Good Contractor: What To Look For And How To Be One
In the construction industry, a general contractor can also be known as a construction manager or a project manager as they oversee the construction site and are responsible for hiring subcontractors and managing the vendors. Here’s what to look for when hiring a contractor and what traits to align with if you’re a contractor yourself.
#contractor#tools#subcontractors#hammer#screwdriver#wrench#excavators#construction_industry#general_contractor
1 note
·
View note
Text
if i was the parks canada underwater archeology excavation team for the hms terror wreck i would simply start taking a hammer and a flathead screwdriver to crozier's desk drawers when im down there. so its a good thing i'm not part of the parks canada underwater archeology excavation team for the hms terror wreck i guess
#are the drawers locked do you think he would have locked them before they abandoned the ship jic the ship was found in the future#i imagine that the wood would be so waterlogged at this point that it's expanded and jammed shut anyways#& i know there must be reasoning why theyre going thru the AB's chests etc first but im white knuckling my laptop here#WHY ARE WE NOT GOING FOR THE CAPTAINS DESK
263 notes
·
View notes
Text
Gold Chain
Din Djarin x Female Mandalorian Armorer Reader
Content & Trigger Warnings: fluff, light angst, slightly jealous / possessive Din, Mandalorian culture, canon-typical swearing, reclaimed Mandalore, Din’s POV
Word Count: 4.3k
Din intended to take Grogu with him back to Nevarro after Mandalore was reclaimed. Duty kept him in the ruins of Sundari, helping Bo-Katan and the other Mandalorians in their efforts to rebuild. Over time, an Armorer from another tribe caught his eye. Din is drawn to you, visiting repeatedly. Seeing everyone else around him find happiness, Din finally decides to seek it for himself.
ao3 // taglist // main masterlist // fluffuary 2024 masterlist
Mando’a Translations:
cyar’ika – darling / sweetheart
ka’rta beskar – iron heart
Ni kar'tayli gar darasuum – I love you
Ori'haat – It’s the truth
riduur – spouse / partner
Vor entye – thank you
The Great Forge of Mandalore is not a singular forge but several.
The large, tree-like monoliths are connected to each other like the collective beating heart of the Mandalorian people. Only three of them are in use as the rest sustained damaged during Imperial aerial bombardment. Like the people they represent, the dead forges are undergoing repairs.
Soon, they will burn and build again.
It requires more than a lone Mandalorian Armorer to keep the fires lit, to shape and bend the beskar, to smelt and refine the metal, to dig into the earth and excavate the ore. For a small covert on a distant planet, one armorer is enough. The forge used is special but tiny. A drab replica of the real thing.
That is no longer the case.
Mandalore belongs to the Mandalorians again. Its people flourish. They thrive, and the urge to rebuild—not just the cities but to grow as a people—is an innate, desperate need felt by all. It is a pounding, driving force like the beat of ceremonial drums.
The air should ring with the sound of a hundred hammers. Foundlings and younglings should be roaming freely, their shouts of joy floating in the breeze. The clans, while different in the ways they adhere to the Way, should be a united front.
All of this deserves to be true, but that is not the reality.
The air does not ring with the sound of a hundred hammers. It only rings with a few.
Foundlings and younglings are not free to roam. There are too many dangers lurking in the dark.
The clans are not a united front. There are plenty who are stuck in their ways and refuse to budge for the sake of the whole.
Some Mandalorians perceive this as a failure.
Din Djarin does not see it that way.
For him, he remembers a time when his ideas about what it meant to be Mandalorian consumed his reality. His covert and their principles were the only thing that mattered to him. The urge to adhere to that life was severe to the point that Din pushed other Mandalorians away.
He no longer holds to those strict ideals. Every Mandalorian here and elsewhere are important to him. Every foundling. Every youngling. Every clan and tribe. All of it.
They deserve to be protected.
They deserve to live on.
They deserve to endure.
That is why Din skulks in the shadow of the Great Forge like a kriffing idiot. He is looking for someone—a woman. Behind the visor in his helmet, Din observes the massive room. The Mandalorian Armorer from his tribe stands near one of the forges. Several helmeted younglings surround her in a short half-moon. They hang on her every word while in her hands is a raw piece of beskar that she turns end over end.
Din is not here for her. He is searching for you, and you are always here. You, who has been on his mind these last few months.
His gaze rolls past the Armorer, finding you near a mountainous pile of beskar. Like the Armorer of his tribe, you are also a Mandalorian Armorer, but there are no younglings or foundlings at your feet.
Picking up a piece from the pile, you examine it, turning it over between your hands before depositing it into one of three nearby bins. Some of it is raw and untreated but there are also helmets, pauldrons, and other pieces mixed in. All of it pulled from the Mines below.
Din has never seen your face, nor does he care. He only knows what his heart wants. It is an insistently nauseating need to be close to you. Solitude and clan are comforts to Din, but they are not enough. Not like they used to be. Every day, Din watches other Mandalorians find happiness and contentment. Their peacefulness is like spice to him, causing him to wonder about what his life could be.
This idea plagues him, and it is why he comes to the Great Forge every day. To see you.
But what is today’s excuse? It’s almost always Grogu.
Din will bring him along and casually mention the importance of watching the Mandalorian Armorers work their craft. At some point, Grogu will be handed off to someone, and then Din lingers near your workstation while he attempts to make conversation.
Attempt is the important word here. Small talk is a genuine failure of his. He doesn’t understand. What comes out of him is fragmented bits of conversation that don’t entirely make sense. Din is awkward, stumbles over his words, and is genuinely flustered by your presence.
Moving out of the shadows, Din ascends the stairs up to the Great Forge. The Armorer briefly glances in Din’s direction before returning her attention to the younglings. You haven’t noticed Din yet, and he takes this moment to admire you.
The armor you wear is unique and unlike anything Din has seen before. The beskar is painted black, the mid-day light reflecting off its shiny surface as you pick up another chunk of untreated ore. Around the t-shaped visor and the ka’rta beskar, is golden paint. But the focal point are the horns on the helmet.
The Armorer of Din’s tribe has horns as well, but they are small and only five in total. Yours curl out and around like Bantha horns. From the base of the bottom-most curl, thin gold chains hang down from small puncture holes in the metal. The ends rest against the fur that lines your shoulders. One of the holes is empty, clearly absent a chain.
At first, Din thought the choice odd, but it’s a nod to your people and how they revere the title of Armorer. It’s ceremonial. Not functional.
Din strides toward you, and when you finally notice his approach, you immediately place whatever you’re holding down, turning toward him. Warmth instantly blooms everywhere, rushing through Din’s limbs like the heat of Tatooine.
“Din Djarin,” you breathe, and it is a gentle sigh.
He loves the way you say his name, as if it’s a secret between the two of you.
“Armorer,” he replies, just as softly.
You laugh and Din flushes behind the helmet. He wants to hear your happiness all the time. “You can call me by my name. We know each other well enough.”
Din inclines his head but does not use your given name. It feels too personal. Too forward. This is new territory for him. He longs to draw you close but fears accidentally pushing you away.
He’s taking things slow. He’s taking things carefully. You are important to him and he doesn’t want to mess it up.
“Where is Grogu?” you ask.
“School,” Din replies instantly, knowing he cannot use the foundling as an excuse.
“That’s wonderful. Lady Kryze mentioned they were trying to put one together.”
Din shrugs. “It keeps him busy.”
“First day?”
Din nods.
“You’re nervous,” you observe.
You’re good at reading him which is startling to Din since he never removes his helmet. Your clan allows it with immediate family and one’s riduur, a fact Din is highly aware of.
“That’s normal,” you continue. “You love him. Want what’s best.”
“We’ve rarely been apart,” replies Din quietly.
“He’s safe.”
“I know.”
The two of you fall into silence and Din doesn’t know where to go from here. He almost always starts these conversations by asking if you’re in need of anything like beskar. Kriffing hell, he’ll even run errands for you. Fetch whatever you ask.
As long as it keeps him in your proximity.
“I—” he begins, cutting off quickly to try and formulate the next thing he wants to say.
“Yes?” You step closer, your arms nearly brushing.
Din is losing his nerve. You’re so close, and Din leans in a bit, pretending that this is more than what it is.
He clears his throat. “Did you need anything? Can I be of service in some way?”
You pause, helmet glancing toward the overflowing piles of beskar. “More of it comes from the Mines every day. I’ve been taking inventory as it arrives.” You sigh heavily. “I worry about the groups that descend into the Mines. I shouldn’t but it’s dangerous, and us Mandalorians are already so few.”
“Your clan helped with that,” says Din, because it’s true.
Bo-Katan had to explain it to him, that your tribe left Mandalore almost a thousand years ago. Disagreement ran rampant, and they headed for a distant planet far in the Outer Rim, nearly into the Unknown Regions. Flourishing where they landed, your people left the galaxy to its own troubles.
“I suppose we did,” you answer.
But they heard the call to return, and Bo-Katan only knew about your clan’s existence because of the Night of a Thousand Tears. They were too late to help, but they went on to save as many Mandalorians as they could, even going so far as to raid Imperial vessels and storage facilities that held beskar.
“You could help with that.”
“Yes,” he says slowly. “Anything.”
“Anything?” you ask, and Din hears the tease in it. The soft way it drops from your lips.
Yes. Anything.
“Command me at your pleasure,” purrs Din.
You clasp your gloved hands in front of you. “Your help pleases me, Din Djarin.”
He melts into the floor. Becomes a puddle. “What would you like me to do?”
You glance at the massive pile behind you. “It all needs to be sorted. Unrefined beskar goes here.” You point to the barrel on the far left. “Helmets, vambraces, or anything with wiring needs to go in that bin.” You turn toward the final bin. “Everything else goes in there.”
Din might not forge armor, but the structure and functions of it are as natural to him as breathing. He approaches the pile, begins sorting. The two of you work in tandem, and anything he’s not completely sure about, he brings to you.
The best part of this is your presence. The worst is that Din wants to talk to you but isn’t sure how. His tribe is not one for small talk, and this is excruciating to him. Din desires to hear your voice, to keep your focus on him, even if it’s a fleeting moment.
Din picks up a dented chest plate and deposits it into the correct bin. “Do you have everything you need?”
You glance up from inspecting a vambrace, looking around the area directly in your vicinity. “Yes?”
“I meant outside this.” Din extends one hand outward, indicating the Great Forge.
Slowly, you drop the vambrace into the bin next to you. “Am I missing something?”
Me, thinks Din. You’re missing me.
“Adequate food? Shelter?”
“My basic needs are met.”
Din picks up a helmet and places it into the correct bin without looking. “And beyond that?” He strides toward you, wanting to find something in your life that he could insert himself in to. Even the smallest thing is enough.
“What do you mean?”
There are so many ways to answer that. What Din truly wants to know is if there is anyone else in your life. If there is anyone else he might have to compete with for your affection. It’s not like he hasn’t subtly asked around or kept a careful eye on the other Mandalorians you speak with on a daily basis. But that doesn’t mean he hasn’t missed something.
“Are you happy, cyar’ika?” The word of affection slips out without thought. Din cannot take it back.
There is a gentle shift in the way you draw back. It’s not from revulsion, disgust, or even anger. It’s only surprise. He has startled you, and Din is unsure if this will derail everything he’s tried to build.
“Yes,” you respond after a short stretch of silence. “But I could always be happier.”
Hope blooms in Din’s chest, slithering out like vines to wrap around his ribcage. He moves closer, one gloved hand reaching out, itching to touch.
“Din Djarin.”
You and Din turn abruptly.
Bo-Katan Kryze lingers near the edge of the stairs, her helmet tucked under arm. “I need to speak with you.”
Din turns back to you and your nod. Placing your hand over your heart, you bow your head. Din knows this greeting and goodbye. It’s normal for your clan to use it with people they’re close to. But then you extend your hand outward, gloved fingers lightly brushing the side of Din’s helmet before dropping away.
“Vor entye.”
Din inclines his head, stepping away from you and toward Bo-Katan. His heart pounds in his chest, the sound rattling in his ears, making the helmet seem small and claustrophobic for the first time in his life.
Din’s gloved thumb rubs up and down the small gold chain in his hand.
It’s thin enough to be a necklace, but that is not its purpose. The gold chain is a replacement piece for the one you’re missing. He discreetly asked the Armorer to make it, and she did so without question, taking great care to create an exact match to the ones you already have.
He holds it in one hand, absently stroking the material as he walks toward the Great Forge. There is no plan to hide in the shadows this time. With the gold chain clenched in his fist, Din strides forward with purpose with the intent to give it to you just like all the other gifts he’s given.
As the enters the large room, Din’s gaze first knocks the Armorer, but when he finds you, and time comes to a grinding halt.
You are not alone.
Another Mandalorian, a man that Din has seen around but doesn’t know, talks with you near one of the working forges. The armor he wears is red and faded. He stands entirely too close for Din’s liking but that isn’t what truly irritates him.
This man keeps touching you. He’s not grabbing for you or forcefully entering your space. Every movement is light and delicate. Sometimes he briefly rests his hand on your arm, waist, or shoulder. He leans in like he can kiss you through his helmet. And Din cannot tell if you’re receptive or not.
You’re not reacting. That much he can see. You do not touch back or lean in. Not like you do with Din. While that comforts him, all he knows is that someone else is pushing in and making a move into his space.
Din quickly ascends the stairs, his strides long and poundingl. The male Mandalorian shifts slightly as you glance over his shoulder before fully turning in Din’s direction. The moment he notices Din, he steps in front of you as if you need protecting.
Cold fury flares within him, igniting a path from his stomach to his head. You step around the stranger, brushing past him to reach Din.
“Din,” and your greeting is just like yesterday, breathy and soft. All that anger starts to melt away because you’re in front of him, and that is all that matters.
You come to a stop just shy of Din’s right shoulder. Gently, you rest your hand on his bicep, the part that isn’t covered by his pauldron.
Turning back to the Mandalorian in red armor, you dismiss him. “Thank you for coming by, Rhuk.”
Rhuk’s t-shaped visor is angled toward Din as he inclines his head in goodbye. “Be well, Armorer.” Din watches him go, tracking his every step until he’s down the stairs and moving away from the Great Forge.
So focused on Rhuk, it takes you three firm squeezes of Din’s arm to draw his attention away.
“Did you bring me something?” you ask, glancing down at his hand.
Din opens it, presenting the small gold chain. You glance up quickly.
“It’s a replacement,” says Din, nodding toward the side of your helmet with the missing link.
You’re hand automatically reaches up, fingertips lightly brushing against the empty spot. It hovers there briefly before falling to Din’s open palm. With gentleness, you slip your fingers under the gold chain.
“Would you like to attach it?” you ask, your helmet tipping upward. Even with it on, Din feels your eyes on him, assessing.
“Is that okay?”
You turn toward a collection of tools. Heading toward it, you select a tiny torch and bring it back to Din.
“Use this,” you offer the torch to him and he takes it. “Slide the chain through and weld it like the others.”
Turning to your left, you present the side of your helmet. Din tucks the base of the torch into his belt. With both hands, he hooks the end of the chain into the hole, pushing it through, guiding it until it sits equal on both sides. Removing the torch, he starts it, turning it to the lowest setting. Din switches, changing the angle of the torch from one side to the other, slowly fusing the two pieces together. Satisfied, Din turns off the torch and admires his work.
“I’m not an armorer,” says Din.
“It’s perfect.”
“You haven’t checked it.”
You shrug. “I don’t need to.” Pride swells in Din’s chest but he remains silent. “Are you staying?” The question hangs in the air, and that quick flood of pride fades a bit. You sound so hopeful.
“No. I can’t stay,” answers Din.
“Well. Thank you.” You lift your hand and tap one finger against the new gold chain. “Tomorrow?”
Tomorrow. You want to see him…tomorrow.
Din nods. “Tomorrow.”
Din begins slowly backing away from you. Turning at the last second, Din nearly misses the top step. He recovers quickly, but hears your soft, stifled laugh from behind him.
Heat flaring in his cheeks, Din descends, heading for the hall that will take him toward Bo-Katan’s council room.
“You should be honest with her.” The Armorer appears at Din’s side like a golden shadow. His head swivels in her direction. The Armorer continues looking forward. “Their tribe is different. You must follow their lead and do as they do.”
Din frowns. Why is the Armorer involving herself?
“How do I do that?” he asks slowly.
“The one that was here pursued her in the way that is custom. You must be as aggressive, Din Djarin.”
She’s giving him advice.
“That is not our way.”
It’s true. Din’s tribe is restrictive when it comes to personal attachments. There is the attachment to tribe, and there is attachment to one’s foundling. Everything is and has always been in service to the whole, never the individual.
“No,” agrees the Armorer. “But it is hers. And she is still Mandalorian.”
The Armorer made an exception with Bo-Katan. Now that all of the clans are together, are the lines somehow blurred? To Din, her words sound like encouragement.
“Then it is permitted?” he asks.
“You seek a happiness that will only strengthen us as a people. It is a noble act. A welcome one.” She pauses. “Do not fear it.”
Din opens his mouth, words forming on his tongue, but the Armorer is already walking away, disappearing as quickly as she appeared.
Bo-Katan’s council room is a blur. It is monotone voices and forgotten ideas. They fuse and dissolve into background noise that is a dull droll in the recesses of his consciousness. You consume his thoughts, occupying his mind, pushing everything else out. The Armorer’s words repeat in his head.
Din stands in the very back of the room, leaning against the wall. The council room is packed full of Mandalorians. There are representatives of multiple tribes and clans. There are updates on the mining operations, discussions about farming and food cultivation, and debates on how to design and start a working energy grid.
While Din keeps one ear trained on the room, the rest of him is elsewhere. Din has always considered himself a man of action. He takes initiative, he faces countless dangers even with the potential for failure, and he never gives up. But with you, Din is as cautious and unsteady as a Rancor’s temper. He only wishes to make you happy, for you to choose him over everyone else.
Aggressive. The Armorer said to be aggressive, to pursue you in the way of your tribe.
Din cannot wait until tomorrow.
The moment Bo-Katan dismisses everyone, Din is off like a blaster bolt, heading back toward the Great Forge. It is late, and there are long shadows across the massive room as he enters. The Armorer is not there, but you are. With your back to him, you have not noticed him yet, and Din takes these solitary seconds to calm his racing heart.
Nervousness seeps in like water finding the openings beneath his armor. The tips of his fingers buzz with anticipation, and all of Din’s senses are heightened and alert like he’s facing down a Mudhorn and not simply about to tell you how he feels.
Swallowing down the trepidation and solidifying his resolve, Din heads for the stairs, taking them two at a time.
“May I speak with you?” he calls out, voice ringing loudly in the empty hall.
You start, turn, shoulders immediately softening when you realize who it is that is speaking. Already, you’re moving toward him and Din’s heart hammers with how quickly you respond. He strides forward, meeting you halfway.
“You came back,” and there is such joy in your voice that Din cannot help himself.
One hand reaches out to rest against the lower-half of your waist just above your hip. Instinct rushes in, and Din’s gloved hand tightens, drawing you closer against him. Your own hand rises, stopping at his chest plate, finding respite just shy of the ka’rta beskar in his armor.
“I needed to see you,” replies Din. Absently, his other hand brushes through the gold chains, finding the new one, only for his fingers to lightly twine around it.
You press in a bit closer, and Din relaxes into the embrace. There is a naturalness to it, the way the two of you stand together. It is its own thrumming drum, something that sits within Din’s chest, beating beside his heart. It moves and twists, the feeling snaking outward to slither between rib bones and around his lungs. Everything comes together, and Din knows that this is right.
This is how it should always be.
“To talk?” you ask.
“To talk.” Din’s fingers release the newly added gold chain. That hand falls, coming to a stop at your elbow. “Come with me.”
You turn with him, the two of you heading deeper into the shadows of the Great Forge. There is no one else in the room but Din wants no interruptions.
“Is there something wrong? Is it Grogu?”
“No,” says Din quickly. “He’s fine.” Reaching out again, Din draws you back to him. You go without resistance, the two of you nearly fused together.
Din needs to just say it. Why have any doubt? You’re hanging on his every word and literally hanging on to him. Every day, Din comes to you. Every day for months. Every day you greet him with tiny touches or gentle greetings. You are always so open, always so warm, and Din misses it—misses you whenever you’re apart.
So, he says it, plainly and without hesitation.
“I missed you.” Your fingers tighten on his arm, chest rising slight, and Din catches the small inhalation. “I miss you all the time,” he continues. “The moments I’m not with you are lonely ones.”
“But you see me every day.” Your voice is a whisper, one so soft that the voice receiver in your helmet hardly picks it up.
“And it is not enough.”
“Din—”
“I wanted to leave after. To take Grogu and return to Nevarro. But I stayed, not just from duty, but because I was drawn to you.” Din shakes his head absently. “I didn’t understand at first. I didn’t want to. But as I spent more time with you, I never wished to leave your presence. I needed to be near you all the time.”
Your arms start to slide around him and Din melts into the touch, the two of you coming together in the shadows.
“I wake and my first thoughts begin with you. Before I rest, my last thoughts end with you. My happiness and future are tied with your own.” Din lowers his voice. “I only make an offer and hope you’ll accept.”
Din’s next inhale is a shudder. “Ni kar'tayli gar darasuum.”
“Din,” you sigh, and he has no idea if you sound happy or sad.
“Ori'haat. I say these words from my heart.”
You place one hand on his chest, this time right over the ka’rta beskar. It slides upward, and gently cups the side of Din’s helmet. He leans into the touch, sighing with contentment.
“You’re an honorable man, Din Djarin. To hear you say this brings me joy.”
Din immediately tightens his hold, every nerve in his body telling him to take you away, to exchange the words and be done with it.
“I am happiest when you’re with me,” you continue. “I am always at ease. At peace. Ni kar'tayli gar darasuum, Din. I wish to never be apart.”
Din lowers his head, his helmeted forehead pressing lightly to your own.
The instinct to kiss you flames within him, but Din does not remove his helmet. It remains in place. In time, it will happen. In time, he will gaze upon your face and find peace within your eyes. All of that will happen.
He has gone without you for this long.
Until it is official, Din can wait a little longer.
taglist:
@padawancat97 @foxxy-126 @glassgulls @km-ffluv @sweetbutpsychobutsweet @singleteapot @garfunklevibes2012 @tiredmetalenthusiast @childofyuggoth @coffeecaketornado @kayden666 @cherryofdeath @enfppuff @cinnabeanz @ninman82 @no-oneelsebutnsu @marispunk @ferns-fics @beebeechaos @thepetitemandalorian
#din djarin fanfiction#din djarin fluff#din djarin fanfic#din djarin fic#din djarin x reader#din djarin x f!reader#din djarin x fem!reader#din djarin x female reader#din djarin x you#din djarin#the mandalorian fanfiction#the mandalorian fic#the mandalorian x you#the mandalorian x reader#the mandalorian#the mandalorian fluff#the mandalorian fanfic#the mandalorian x f!reader#the mandalorian x female reader#mando fluff#mando fic#mando x reader#mando fanfiction#mando x you#mando fanfic#star wars fluff#star wars fanfiction#star wars fic#mando#mandalorian culture
157 notes
·
View notes
Text
Construction and Mining Equipment from DCS Techno
1. Hydraulic Generator
DCS Techno Supplies Hydraulic Generator over all India. Basically, Hydraulics Powered by Dynaset. Dynaset, Finnish Company hydraulic outfit converts the hydraulic power of mobile ministry into electricity, high- pressure water, compressed air, attraction power, vibration, and power boost. Dynaset technology increases the productivity of mobile ministry from small vehicles to heavy machines by adding new functions with hydraulic outfit.
Why choose Hydraulic Generator?
Hydraulic Generator convert hydraulic inflow from being ministry into a compact, quiet, and dependable AC or DC power or can be integrated into an expansive range of being shops and ministry using either a PTO- driven pump or an Electromagnetic Clutch and hydraulic pump.
Hydraulic Generator can be designed to suit specific operations and are available in an expansive range of AC and DC labours. Hydraulic creators are compact, featherlight, quiet, dependable, bear little if any servicing or conservation, secure, and generally more provident to operate than diesel or petrol creators.
DCS Techno is Supplying Hydraulic generator from last 10 Years. Hydraulic generator produces high- quality electricity using the power of the base machine’s hydraulic System. The Hydraulic creator is turned on by opening the hydraulic oil painting flux to it.
A hydraulic generator is a quiet- running creator that doesn't need a fresh pump or motor. Installing a Hydraulic generator into a mobile machine increases vehicle productivity and net worth. There's no farther need for dragging big separate creators to the work Spots, Hydraulic generator is always on board and ready for use.
By installing the hydraulic generator to the mobile machine, the operation rate of the machine increases and there's a lower need for multiple machines on the worksheet.
crucial Benefits Always ready for use Saves time, space, and coffers farther continuity Easy installation on all hydraulic systems.
2. Foundation Drilling Tools
We show vast dexterity in feting new trends and ideas for early perpetration. We snappily get new results to vend and acclimatize to changes in guests’ needs. We love to work with advanced technology and largely effective products.
At DCS Techno we've been Supplying foundation drilling outfit. We're always making advancements to increase the bit performance and bit life of the foundation drilling tools to minimize operating Costs to our guests. Our Products maximize productivity, minimize wear and tear, and boosts overall performance.
3. Organic Waste Composter
Organic Waste Composter (OWC) In any kind of Bio-Degradable Wet Waste, 70 of the content is Water and the balance is Solid content. This is the crucial principle for working with GREEN BIN.
Organic Waste Composter (GREEN BIN) is a completely automatic composting machine that uses special microorganisms to break down and putrefy all kinds of organic waste into compost with a volume reduction of 85- 90.
The entire process is natural and natural. Our special microorganisms thrive in high temperatures and indeed in largely acidic or salty conditions. Organic Waste Composter Machine an Organic Waste Composter machine is a free unit that works with the fertilizing of the soil commerce and gives better coprolites.
It accepts squander as its feedback and gives toxin as its result. The crucial reason for Organic Waste Composters is to save the terrain and for the health and protection of the people. Many kinds of waste can be hurtful and can onus the climate.
The organic waste composter will exercise can also origin land and air pollution which can affect serious medical conditions in mortal beings and creatures.
Benefits Of Organic Waste Composter Reduces the need for Chemical diseases Cuts Methane Emigrations from Landfills Holding moistness and smothering factory infections Reduces Waste Stream Conserves Water.
4. Drum Cutters and Concrete Cutters from DCS Techno
Drum Cutters attachments for excavator A barrel knife is an attachment where rotating cans equipped with picks, strategically deposited around the external periphery, are rotated by a hydraulic motor at several hundred revolutions per nanosecond to cut gemstone, concrete, or frozen ground.
Operations Drum Cutters attachments for excavators can be used for gemstone excavation, obliteration, underground scaling, lair profiling, trenching, and other operations. Aquatic Can be used up to 30 measures aquatic without fresh installation or revision.
knife picks the picks that perform the slice job are wear and tear- resistant, interchangeable teeth. Concrete Cutters from DCS Techno Are did you involve in a concrete cutting design? Are you confused about which kind of concrete aphorism; you must choose for the design? Our establishment focuses on furnishing Concrete Cutting machines that are employed in the development assiduity for cutting wet and dry concrete, artifact, and plenitude further.
This machine is accessible with high- speed packaging capacity and allows operations automatically. Integrated with the newest ways and features, these concrete- slice machines are largely accredited within the assiduity. Our offered slice machines are manufactured by our experts using high- end quality substance.
Features Fast concrete cutting reliable and long service Easy to start- up Different Uses of Concrete knife A concrete cutting aphorism may be a tool that runs on gas, gas pressure, hydraulics, or an electrical motor. it’s jointly called a road saw, consaw, or block saw. A concrete aphorism is employed for cutting laborious accoutrements like concrete, penstocks, asphalt, slipup, masonry, and indispensable solid stuff.
The blades of concrete sayings are typically made up of diamonds for effective and precise cuts. Concrete sayings have several uses and edges. you ’ll be suitable to use a concrete saw to chop through penstocks, bricks, concrete, blocks of gravestone, and indispensable laborious accoutrements.
They ’ll be oriented cut openings or channels through concrete blocks, walls, and crossbeams. Concrete sayings may be hand- held, mounted on a stage, or wheeled manually or by an electrical motor. you would like correct coaching to securely and effectively use a concrete Cutter. the proper- sized slice blade ought to be put in duly and guarded before victimization the concrete saw. you must use the proper blade for the design and cleave to any or all safety rules and wear guarding gear once employing a aphorism to hash the concrete.
Different Types of Concrete sayings There are multitudinous types of concrete aphorisms out there. Every maxim will serve a purpose depending on the job you need to get done. It’s important to grasp the colourful kinds of sayings out there so you ’ll be suitable to choose the simplest tool for your coming concrete- cutting design.
1. Chain sayings
2. Hand Saws
3. line sayings Chainsaws are a number of the foremost wide concrete sayings on the request currently.
These sayings can offer you an Associate in Nursing unmatched perfection because of the fluid mechanics of the tool. Hand sayings are units out there in several sizes and shapes. they ’ll help you to complete the concrete- slice design fresh with effectiveness. you ’ll be suitable to travel masonry and different masonry victimization with this tool. line sayings are a unit ideal after you have to be impelled to embrace foundations, pillars, and depths beneath the concrete face.
Core drills area unit effective after you have to be impelled to pass over concrete shells. principally, Concrete knife is used for road slice. Make a quick job of cutting concrete, asphalt, and brand. We give high- quality and durable concrete knives to our guests.
5. Road Milling Tools
DCS Techno is a client Acquainted company. We supply road milling tools fitting all major brands on the request. Road Milling Tools come in different models for colourful Surface Conditions. We Understand that roads have different Conditions. This is why our Product’s design is to address these differences.
So, if you need Road Milling Tools DCS Techno may be your stylish Choice. We're a veritably presto- growing company with largely innovative mates with a charge to lead the metamorphosis into a more digital and sustainable hereafter. Within mining and construction, we've accrued design experience and pious guests in hundreds of operations in India as well as in the import request.
6. Excavator Attachments and Excavator Hammers from DCS Techno
DCS Techno Supplies Excavator Attachments and Excavator Hammers all over India from last ten years. Basically, excavator attachments and Excavator hammers are used in business like development, Construction and mining.
The Excavator Attachments came with a Universal Tool carrier, which redounded in a much-advanced position of machine application and effectiveness. Excavator attachments and Excavator Hammers were designed and erected for maximum performance safety. Excavator attachments are finagled to maximize the power and effectiveness of your excavator and deliver the most productivity. Excavators come all the further actually progress every time. New-age machines have better energy applications, lower effluences, produce lower commotion, and give further power than previous models. Progressed PC fabrics screen the earth transport’s well-being and estimate director prosecution.
Excavator hammers are connections intended to separate cement, gemstone, and other hard accoutrements. They make short work in a wide compass of businesses like development, destruction, and mining.
Excavator hammers are mounted on the blasts of excavators which help sloggers with expanding their effectiveness in hands-on locales. They all come in numerous sizes for your excavator dependent on your breaking needs and working spending plan. Purchasing an excavator hammer is an expenditure-effective option in discrepancy to excavator hammer reimbursement or copping new bone.
7. Bucket Crusher
DCS Techno Offers a Bucket Crusher with a flexible, economical, and effective solution for Crushing and screening requirements at Construction Jobsites, Stone quarries, and also in demolition applications. Bucket crusher are an innovative answer to Crushing requirements on today’s Worksites. Using the bucket crusher all types of inert obliteration material can be crushed and re-used on site. During the Crushing Process, the bucket crusher is deposited vertically so that the persecuted material can be released.
To Know more information about Hydraulic Generator, Bucket Crusher, Excavator attachments, Concrete Cutter, Organic Waste Composter, Drum Cutters, Road Milling Tools, Excavator Hammers and Foundation Drilling Tools Visit: dcstechno
Contact us:
Plot No 169, Road No.11,
Prashasan Nagar,
Jubilee Hills,
Hyderabad,
Telangana – 500096
+91-9849009875
#b#hydraulic generator#foundation drilling tools#organic waste composter#drum cutters#concrete cutters#road milling tools#excavator attachments#Excavator Hammers#Bucket Crusher
0 notes
Text
The Life and Deaths of Christopher Lee Kickstarts Deluxe Blu-ray Edition
The Life and Deaths of Christopher Lee mixes traditional documentary with a dash of fantasy. It is narrated by Christopher Lee himself... in the form of an elaborate marionette, voiced by Peter Serafinowicz. The marionette was custom designed and built by Arch Model Studios, who made all of the puppets for Wes Anderson's Fantastic Mr. Fox, Isle of Dogs and Asteroid City and Tim Burton's Frankenweenie.
The film combines new, exclusive interviews with filmmakers, including Peter Jackson, John Landis and Joe Dante, friends and family members with animated flights of fantasy from a wide variety of artists including 2000AD's Simon Coleby, award winning stop-motion animator Astrid Goldsmith and the legendary illustrator Dave McKean who directed, scored and animated a whole chapter of the film himself.
Spanning eight decades and almost three hundred films, Christopher Lee became famous for his iconic performance as Dracula. But he was so much more than just the Hammer Horror roles he is so fondly remembered for. His career took him from uncredited parts in 1950s swashbucklers with Errol Flynn, through famous performances in 007 and Star Wars films, cult hits like The Wicker Man and The Return of Captain Invincible, right up to a lead role in cinema's biggest event - The Lord of the Rings trilogy. Along the way, he worked with everyone from Orson Welles to Mario Bava, Jess Franco, Tim Burton, Martin Scorsese and Steven Spielberg.
Yet his story is so much richer than just his career. Lee was born into Italian aristocracy, with a military career shrouded in secrecy and kept his private life closely guarded. Some of his ventures and adventures seem highly improbable yet, as the film reveals, he often found himself in unexpected situations - he witnessed the last ever death by guillotine, was cousins with 007 creator Ian Fleming, he met Tolkien, performed with the classic Saturday Night Live line-up, was a friend and neighbour of Boris Karloff, he was the oldest person to ever get on the Billboard music charts (with his own Heavy Metal album), was an expert knife thrower, professional opera singer and a Nazi hunter. And somehow, he also managed to appear in almost 300 films of both the highest and lowest quality imaginable.
The film is finished and producers Jon Spira and Hank Starrs want to share it with you by producing a top quality Blu-Ray with great extra features and a really amazing LIMITED/NUMBERED EDITION COFFIN-SHAPED BOX SET, full of goodies, which will look killer on the shelf of any discerning cineaste. The jewel in the crown of this box-set will be a 3D 'death mask' of Christopher Lee designed and produced by Arch Model Studio exclusively for this set. They also want to host some screenings - both online and in real cinemas - so we can all experience it together and you can get to meet some of the people behind it.
Making this film has been a fascinating journey - producers excavated the British Film Institute archives where they hold Lee's personal collection of scrapbooks detailing his career in his own hand, been given access to personal photos from the family archive, they met and interviewed his closest friends and family from all over the world and we've worked with some incredible artists, puppeteers, animators, musicians and filmmakers to bring his story to the screen in the most cinematic way. Whether you're a fan of Horror, Star Wars, Lord of the Rings or just cinema history in general, we think you'll be delighted by this revealing and eclectic documentary.
Risks and challenges
The film is fully edited and ready to go. This Kickstarter is to fund the final bits of post-production and the production of a fantastic Blu-ray and deluxe collectors edition box set as we're all still committed to physical media. Please note that all illustrations of rewards are designs/prototype images. The final items might differ - we hope they'll actually be better.
#Christopher Lee#Documentary#Hammer Films#Amicus Productions#Amicus Horror#John Landis#Joe Dante#Caroline Munro#Harriet Walter#Nazi Hunter#secret agent#Dracula#Jess Franco#Mario Bava#Steven Spielberg#George Lucas#Star Wars#007
124 notes
·
View notes
Text
Rammer G90 Hydraulic Breaker Hammer Seal Kit for Kubota Case Caterpillar Hitachi Bobcat Gradall Komatsu John Deere Liebherr Excavator
Rammer G90 hydraulic breaker hammer seal kit for Kubota, Case, Caterpillar, Hitachi, Bobcat, Gradall, Komatsu, John Deere, Liebherr, excavators is stock available.
This comprehensive kit includes all the seals you need to rebuild your Rammer G90 hammer, including:
Piston seals
Guide seals
Cushion seals
O-rings
Backup rings
Benefits of using the Rammer G90 Hydraulic Breaker Hammer Seal…
View On WordPress
#BOBCAT#Breaker#CASE#CATerpillar#dozer#excavator#G 90#G90#GRADALL#Hammer#Hydraulic#JOHN DEERE#Kit#KOMATSU#Kubato#Liebherr#Rammer#rock#Seal
0 notes
Text
'TIL a papyrus scroll indicates that, during the building of the tomb of Pharaoh Ramses III, the workers were upset about their treatment and, rather than discussing it with them, management served them a large meal.
'The workers didn't think that was enough so occupied the Valley of the Kings refusing entry to anyone until they were given a raise and "cosmetics" (research shows it was a form of sunscreen).
'So not only does workers organizing a strike and forming a picket line for better wages and workplace safety conditions date back TO THE FRIGGIN' BRONZE AGE, but also management has been trying to placate discontented workers with a pizza party.'
And then that went viral on Twitter and I got hammered with people trying to "Well ackshually" about my three-tweet-long thread on a thing I'd learned just that morning I turned into a joke about corporate pizza parties. So I decided to research and here's the entire story.
TL;DR: I was pretty much right except it'd be closer to say "donuts/cupcakes in the breakroom" rather than "pizza party".
The events took place sometime around 1157 BCE (specifically the 29th year of Ramses III’s reign) in the village of Deir el-Medina, a worker village for the people who worked on the built the tombs in the Valley of the Kings.
BTW, the site itself is fascinating as it was first excavated in 1922 and ended up being one of the most thoroughly documented accounts of community life in the ancient world and proved the builders of the Pyramids were middle-class skilled artisans and craftspeople, not slaves.
You also have to know that this era of history is around the start of what’s known as the Bronze Age Collapse. Some sort of environmental catastrophe happened that caused widespread crop failures across the ancient world.
Now what precisely happened is strongly debated, but generally several groups from elsewhere in Europe and Africa known as the “Sea People” attacked the ancient civilizations of the Mediterranean, which caused most of those cultures to collapse.
Also, commerce was a bit different as they were (oversimplified explanation) on the bread standard. Salaries were measured in values of beer and bread as the recipes for those were standardized and made up the basics of the diet.
So while common laborers would be paid in literal beer and bread, more highly-valued workers would be paid in an equivalent of a larger allotment of beer and bread. So they’d get paid “100 loaves a day” worth of oil or metal or coin representing the value.
Now, for our tale. This comes from the contemporary account of the scribe Amennakhte. If anyone wants to read along, a photo of the scroll along with a translation is available to read for free at https://libcom.org/article/records-strike-egypt-under-ramses-iii-c1157bce
On Year 29, Second Month of Winter, Day 10, a group of workers walked past the guards and sat at the Temple of Menkheperre stating it had been 18 days since they’d last been paid, staying the night in the tomb saying “We have matters of Pharaoh”.
The following day, a scribe brought the workers 55 “s'b-cakes”. So yes, a “pizza party”. I can’t find any reference to what this is precisely other than “fine bread” that was worth more than a large loaf of standard bread.
Seriously, I wasted an hour of my life trying to figure out what “s'b-cakes” are exactly so if anyone knows please tell me.
Anyway, it didn’t work and there was “quarrelling” at the temple of Ramses II. The translations says “chief of police” which doesn’t seem quite right but I’ll go with it, but anyway he said he’d fetch the mayor of Thebes.
The mayor claimed they didn’t have enough to pay. The workers responded by saying “The prospect of hunger and thirst has driven us to this. There is no clothing, there is no ointment*, there is no fish, there are no vegetables.”
They then said to go tell it to the Pharoah directly. On Day 12 (the day following the “quarrelling”), they were given their ration they were due during the previous month (basically, they got their back pay). It was 21 days late.
Side note: I got some pushback by an “Egyptologist” for calling the “ointment” a type of sunscreen and…yes, it was. Some translations mark this as “cosmetics” but it was a medicinal balm used to prevent and treat sunburn. What the hell else would you call it?
So Day 13 (the fourth day of the strikes) and Mentmose, the “chief of police”, apparently took a side. He told the workers to lock down the work site and continue their protests, and that he’d lead them to the temple to continue the sit in.
His words (recorded by Amennakhte): “I’ll tell you my opinion. Go up, gather your tools, close your doors, fetch your families, and I’ll lead you to the temple of Seti I and let you settle down there.”
At this point, the tax master Ptahemheb came out to talk to them making a list of all the things they demanded. On Day 15 (sixth day of the strike), they tried another “pizza party” with half a sack of barley and a jar of beer for each worker.
Amennakhte doesn’t say what their response was exactly, but does say that the workers brought torches so they could continue the protest in the dark. So I take it the response wasn’t good.
Day 17 (eighth day of the strike), the head of the temple came out and asked what demands to bring to the Pharoah for them. And they gave a detailed list of what precise wages they wanted for each of the workers.
On that day, they were given what they asked for in rations for the second month of winter. They may have also been paid early as they should have been paid on the 21st or 28th day depending on the source.
So we’re now in the third month of winter (no exact date written) and they’re still striking. Worker Mose said basically “As Amun as my witness if you drag me away I will come back and start robbing the tombs.” I couldn’t fit the whole thing in one tweet.
Reshpetref, the proctor, said “We will not come back, you can tell your superiors that. For sure, it is not because of hunger that we strike, but we have a serious charge to make. Something bad has been done in this place of the Pharoah”.
We’re on the fourth month of winter now, Day 28 (so over three months of striking now) before the Vizier shows up. This is the government official that handles day-to-day business and is second only to the Pharoah.
He says he just got promoted so isn’t authorized to give them their wages (at least partially true, he’d just been promoted five days prior) and even if he could, there was nothing in the granaries to pay them with.
The granaries may have been empty because of the other issues going on with the Bronze Age Collapse or it may have just been the rampant corruption speculated of the government of the era, or he may have been lying.
On the first month of summer Day 2, the crew got two sacks of grain as their ration (they’d demanded 5 ½ sacks each). The foreman Khonsu told them accept it, then go down to the market and tell the Vizier’s children about it.
Amennakhte (who again, is writing this scroll) stopped them and said NOT to go to the market since they’d been paid and if they did, he’d have to have them arrested. He doesn’t mention they were only paid a third of what they were owed.
First month of summer, Day 13, passes the guard post saying “We are hungry” and continued their sit in. They shouted at the mayor of Thebes as he passed, who then got them 50 sacks of grain to tide them over until Pharoah paid them.
That’s the end of this particular scroll, but there’s evidence that strikes continued throughout the reign of Ramses III as there are records of more workers being hired to transport food and supplies to the workers.
The scroll also leaves out some of what happened in between dates. For example, it wasn’t one single long strike, but a series of them. After they were paid their wages the first time, the workers went back to work.
However, they were told that was their pay for the third month of winter and not the second so they wouldn’t be getting paid again, sparking the second strike that lasted into summer.
There’s also a big deal in Egyptian culture at the time called “Ma’at” or basically “The Order of Things”. Nobody had any idea what to do with the striking workers because workers weren’t supposed to strike. They were supposed to work.
Sure, they were treated well and the village of Deir el-Medina lived at what could be called middle-class standards for the time period, but they weren’t supposed to rebel against their betters in this way. It was unthinkable.
There was also a big festival coming up to celebrate the 30th year of the reign of Ramses III and a lot of the government officials were focused on that, more concerned with maintaining order than actually managing the country.
I should also note I paint Amennakhte as on the side of the government rather than the workers when the opposite was likely the case. The strike wasn’t recorded in the official government records as Egypt tended to cover up their losses.
That said, we do have some records like those of Amennakhte showing that, once the workers realized they had the power to organize, they used it all the way through the New Kingdom.
The last entry on the scroll doesn’t directly involve the strike, but is related. On the first month of summer, Day 16, one of the workmen provided evidence that government officials were stealing from the tombs.
One of them, Weserhat, was one of the ministers who shorted the workers payment previously. The other, Pentaweret, may be the son of Ramses III at the center of the “Harem Conspiracy”, an assassination plot that took place between 1 to 3 years later.
In summary, the workers were unpaid due to corruption and management enriching themselves, they went on strike, management threw them a pizza party, that didn’t work, and they eventually got their demands.
Though I guess if you want to be completely accurate, it was more “donuts/cupcakes in the breakroom”…
#egypt#ramses iii#ramesses iii#labor rights#strike#pizza party#donuts in the breakroom#union#union strong#Also before anyone says this is Ramses III not the Pharaoh of Exodus#That was Ramses II almost a century earlier and a completely different dynasty#Not going to open the can of worms that is archeological evidence (or lack thereof) supporting biblical accounts of history#But either way the events are unrelated as they were 70-100 years after Exodus would have been#ancient egypt#ancient history
649 notes
·
View notes
Text
From somewhere within (teaser)
moodboard by the queen herself @zae5
Pairing: Aemond Targaryen x maid!reader
Warnings: angst, smut, grinding, fingering, oral sex (more to be added)
based on a request from @troublesomesnitch
Coming soon!! 💚
SNEAK PEAK
The smell of roasted pig twisted his stomach, lingered inside his nostrils all night long, tossing and turning in bed, trying to quench the pent-up anger painfully rattling his bones, only to find no release, no peace to the ceaseless raging pit buried inside him since Driftmark.
That spineless bastard and his mocking smile were etched before his eye, hammering his nerves until every breath taken came with a shudder. Until he hastily removed the sapphire from the ugly socket and threw it away.
Her name glided on his tongue like a command shrouded in honey, a plea hidden by thorns.
But he paused, blinking into the quiet dark of his chamber, and the word slid back down his throat.
She’s not here.
Of course she wasn’t. Her duties as servant were long over. There was no reason why she should have been in his chambers at that hour late. But there was one reason, however selfish and dangerous that might have been.
It had always been there, since the very first day she attended to him as his maid.
They had filled the distance with words, formal words and then words of different nature. Words excavated from his violent lungs but spoken with a quiet tongue. He didn’t know why.
Perhaps it was the gentle touch of her hands while she helped him with the ointment for the socket.
Perhaps it was the sound of her voice when, one night, the hole was pulsing harder than usual and he had asked her to read to him.
Perhaps it was the way she looked at him, as if she had not seen the sun for ages.
#once a teaser always a teaser#liv(in la vida loca)#aemond targaryen#ewan mitchell#aemond x reader#aemond targaryen fic#aemond targaryen x you#aemond targaryen x reader#aemond targaryen x female reader#aemond targaryen x fem!reader#aemond fic#aemond smut#aemond x fem!reader#aemond x you
166 notes
·
View notes
Text
So Ludinus is excavating the ruins of Aeor's Factorum Malleus (where the term Malleus Key comes from, obviously) aka the Creator Hammer they used to try and kill the gods, which caused the gods to strike them down, and he wants to use it to try and penetrate into Predathos' prison? GOD THIS LONG GAME IS INSANE!
MMFM... MOTHER FUCKIN' MATT MERCER!
46 notes
·
View notes
Text
#breaker attachment for backhoe#backhoe breaker attachment#backhoe hammer attachment#backhoe rock breaker#backhoe hydraulic hammer#backhoe rock hammer#backhoe loader breaker#backhoe hammer#attachments for backhoe loader#attachments for backhoe#backhoe loader companies#backhoe loader excavator#backhoe hydraulic#backhoe loader#backhoe construction equipment
0 notes
Last Seen Blogs
