#alumi-plant | Explore Tumblr Posts and Blogs

adtechmetallurgicalmaterials · 10 months

Text

Documentary of Yunal Aluminum Haixin's practice of green development

Paint the background of green, low-carbon and high-quality development with the attitude of struggle

——Yun Aluminum Haixin's practice of green development documentary

The report of the 20th National Congress of the Communist Party of China pointed out that it is necessary to accelerate the green transformation of the development mode, implement a comprehensive conservation strategy, develop green and low-carbon industries, advocate green consumption, and promote the formation of green and low-carbon production methods and lifestyles. This major strategic decision-making arrangement provides a fundamental basis for promoting the country to achieve the goal of carbon peaking and carbon neutrality.

As the vanguard of the green aluminum production capacity of Yunalco, Yunalco Haixin Aluminum Co., Ltd. (hereinafter referred to as Yunalco Haixin) has always been adhering to the development concept of "green water and green mountains are golden mountains and silver mountains", and "responsible Chinalco, green Haixin" "Incorporated into the whole process of the company's development planning, business decision-making and production activities, continuously increase the proportion of green and low-carbon development, deeply promote green manufacturing, build low-carbon factories, promote clean production, pursue energy saving and consumption reduction, strengthen technological innovation, and promote high-tech quality development.

Pollution reduction and carbon reduction: clean production has achieved remarkable results

Cleaner production plays an important role in promoting the synergy of pollution reduction and carbon reduction, and helping to achieve carbon peaking and carbon neutrality. In order to create a green production environment and reduce the pollution discharge of production water, so as to achieve the goal of driving high-quality development with a green engine, Yunaluminum Haixin has built a set of initial rainwater collection ponds with a daily processing capacity of 2,000 cubic meters to achieve preliminary of water treatment. In addition, Yunlu Haixin has also built two sets of domestic sewage treatment systems with a daily treatment capacity of 480 cubic meters and one set of production wastewater treatment systems with a daily treatment capacity of 250 cubic meters, further improving the rain and sewage diversion system inside the factory. The production wastewater treatment system adopts technologies such as multi-media filtration, ultrafiltration, reverse osmosis, and MVR evaporation and crystallization. Reuse of domestic water, plant greening, to achieve zero discharge of sewage.

In accordance with the construction requirements of the green hydropower aluminum processing integration project, Yunal Aluminum Haixin has also built 6 sets of flue gas purification systems and 40 sets of single-machine bag dust collection systems in the factory area. Through the use of alumina dry purification adsorption and semi-dry desulfurization technology , After the electrolytic flue gas is purified, the emission concentration is much higher than the national emission standard, and the pollutants are ultra-low emission. At the same time, Yunaluminum Haixin vigorously promotes the harmless disposal and resource utilization of hazardous waste. In July 2020, the carbon slag resource utilization system with an annual processing capacity of 7,000 tons will be completed and put into operation. It adopts non-secondary pollution treatment technology to realize the Recycling, reduction, and harmless utilization of hazardous waste. Since the start of the project, more than 19,000 tons of carbon slag have been processed, and the output value of recycled electrolyte with a purity greater than or equal to 98.0% has reached more than 9,000 tons. Low-emission low-carbon products are manufactured, and reliable, safe, green and environmentally friendly primary aluminum and aluminum alloy products are created.

Resource recycling: energy saving and consumption reduction

Under the guidance of the national "dual carbon" target policy, Yunal Aluminum Haixin gives full play to the leading role of science and technology, stimulates the internal power of green innovation, focuses on "energy saving, consumption reduction, pollution reduction, and efficiency improvement", and achieves low energy consumption and high efficiency through refined management , actively using the latest pollution reduction technology system, focusing on improving the quality of circulating water sources, through continuous improvement of energy consumption online monitoring system, online monitoring, and remote operation, intelligent water control is achieved, and the efficiency of recycled water is greatly improved. According to statistics, from 2021 to 2022, the water resource recycling rate of Yunnan Aluminum Haixin will reach 90%, effectively realizing zero discharge of sewage. In August 2022, the company was awarded the "Yunnan Provincial Water-saving Benchmarking Enterprise", and ranked first in the electrolytic aluminum industry with an outstanding water intake of 0.18 cubic meters per ton of aluminum, and ranked second overall.

Constrained by the "dual control" policy of energy consumption, Yunal Aluminum Haixin actively changed its development thinking, took the practice of ecological development, and built a green Haixin as the main line, carefully and meticulously managed from the source, and strictly controlled the output of energy consumption , by exploring the recovery and utilization of waste heat from electrolysis flue gas, recovering waste heat from the flue gas purification system, and heating cold water into hot water, it satisfies the use of office buildings, shift dormitories, canteens, heating, etc. in the factory area and living area to the greatest extent. While life is convenient, it also exerts great economy and applicability. In 2022, Yunaluminum Haixin will provide about 36,000 cubic meters of hot water throughout the year, the direct current power consumption per ton of aluminum will be reduced by about 68 kWh year-on-year, and the auxiliary power consumption per ton of aluminum will be reduced by about 120 kWh year-on-year. A solid foundation has been laid for achieving the goals of carbon peaking and carbon neutrality.

Green Technology: Technological innovation is becoming more and more perfect

Innovation promotes development, and technology leads the future. As a leading scientific and technological innovation enterprise in the electrolytic aluminum industry, Yunlu Haixin has always attached great importance to research and innovation in the field of project technology. Through government support and talent introduction, it has successively participated in the "Key Technology Research and Technology Project for Efficient Recycling of Aluminum Resources" "Development and application of 7,000 tons of carbon slag thermal treatment technology", "Research and development of aluminum electrolytic semi-dry desulfurization technology" and other projects have achieved phased technological breakthroughs, integrated multiple innovative technologies, and achieved great success in R&D, production, and quality control Several aspects have been effectively integrated with production and operation.

During the opening of the tank, due to process requirements, the tank cover door is frequently opened and closed, resulting in fugitive emissions. The fine particle dust cannot be absorbed through the desulfurization tower air duct in a timely and sufficient manner, and diffuses to the external space through the roof ventilator. In order to reduce the environmental impact caused by fugitive emissions, Yunaluminum Haixin adopts the advanced technology of micron-level dry fog dust suppression. By arranging dry-fog nozzles along the roof ventilator, it sprays micron-level dry fog with the same particle size as the dust The loose dust is condensed and collected, and its settlement is accelerated to achieve the purpose of dust suppression. After the system was put into operation, the dust suppression rate reached 90%. Compared with the start-up period of the first-phase electrolyzer of the project, the fugitive emissions in the factory area and the external environment have been significantly improved, greatly reducing the environmental risk during the start-up period.

In recent years, Yunaluminum Haixin has devoted itself to the research and development of new energy-saving equipment, and put it into trial operation at a 10 kV air compressor station. Through the comparison of one month's operation data, the electricity consumption of Yunallu Haixin has been reduced by about 10% compared with that before the equipment is used, which can save more than 3.8 million kWh of electricity every year. By comparing the use effect of motor power savers in benchmarking enterprises, the Yunlu Haixin R&D team boldly researched and tried to select suitable pilot sites to install power savers on 22 motors. After the test is up to standard, it will be promoted and used throughout the company.

The rise of green, the future can be expected. Green, low-carbon and sustainable development has become an important trend for Yunal Haixin to move towards high-quality development. In the future, under the guidance of the spirit of the 20th National Congress of the Communist Party of China, Yunal Haixin will actively fulfill the sacred duties of ecological civilization construction and ecological environment protection, continue to explore on the road of sustainable green development, and integrate the concept of green development into every production In the session, with the posture of struggle, we will paint the background of green, low-carbon and high-quality development, and write a new chapter in Haixin's green development for building the southwest base of Chinalco's aluminum industry worth 100 billion yuan.

Adtech Metallurgical Materials Co., Ltd is a Sino-foreign joint venture integrating R&D, production, operation and service of metallurgical materials. With strong technical force and perfect production and operation system, The main products of Adtech :

porous ceramic filter,ceramic foam filter, alumina ceramic foam filter,

degassing unit, degassing equipment.

boron nitride coatings ,granular flux, refining flux.

launder system ,flow control unit.

tap out cone,caster tip, etc.

#aluminumdegassing #porousceramicfilter #aluminumfiltration #aluminumingot #aluminumfactory #aluminumprocessing #aluminum

0 notes

timmpowell · 4 years

Photo

I’m done for the day, finished up reinstalling the two @aluminess side ladders. Tomorrow my partner in crime & I are driving to McMinnville, Tennessee to shop some of the plant/tree nurseries. It ain’t called “Nursery Capital of the United States” for no reason. #vanlife #realvanlife #vanbuild #diyvan #adventurevan #vanconversions #roadtrip #landscapenursery #plants #marysgreenhouse #walkergardens #mcminville #middletennessee #aluminess (at Sycamore Creek) https://www.instagram.com/p/CBBofUajBI4/?igshid=18lg69ihke6gh

#vanlife #realvanlife #vanbuild #diyvan #adventurevan #vanconversions #roadtrip #landscapenursery #plants #marysgreenhouse #walkergardens #mcminville #middletennessee #aluminess

0 notes

littleeyesofpallas · 4 years

Text

Shaman King - Name Games

I didn’t really intend to expand this accidental series of Bleach posts outside one series, but I was looking back at Shaman King, what with the new anime having been announced, and to be honest there’s not a lot to pick at in this particular regard --a lot of the names are pretty straight forward, or just not Japanese, and the O.S. are all similarly named, predominantly in English or with pretty straight forward Japanese epithets.

Like, for example Amidamaru’s name is just written as Amida[阿弥陀] as in the Japanese name for the Buddha, Amitabha, and -maru[丸] super common super generic suffix for boys’ names. All his attack names are accordingly Buddha themed. There’s no real obscure or obtuse kind of references or anything that isn’t really self explanatory. It does tie into Yoh’s general attitude and personal philosophies being zen influenced, which I guess takes a bit of a leap if you’re not familiar, but again it’s pretty obvious.

Then his Over Soul names are all things like:

阿弥陀丸 = “Amidamaru”

スピリット・オブ・ソード = “SUPIRITTO OBU SOODO” = “Spirit of Sword”

...白鵠 = “...Byakko ” = 白:“White,” 鵠:”Swan”

Really straight forward. English readers really weren’t missing much. Or at least if they were reading Mankin Triad’s scanlations. (I’ll be honest, I never read all the Viz prints front to back.)

But you know what are some fun kanji readings that TOTALLY get missed in English? The actual names of the main character. And granted, a lot of characters in the series aren’t Japanese so they don’t all get fun clever names, but the Asakura family is like one big running joke...

So, in-world, the family itself starts in Japan in the 900s with an orphan child named Asaha(麻葉) Douji(童子) whose names read as “Hemp”+”Leaf” and “Child(implicitly a boy)” but also an archaic reading meaning “Scholar" or depending on context “Sorcerer.“

For a little context, despite Japan having rather notorious modern marijuana policing, hemp was actually a widespread and integral crop in Japan for hundreds of years so it’s not an uncommon component of names in the first place. It’s also the basis of a very common pattern in traditional Japanese fabric printing (and you’d probably seen it before in period settings in anime, manga, J-dramas, or film) it’s called Asanoha(麻の葉) and you’ll notice is the exact same kanji as the name Asaha.

The boy, Asaha, grows up to be a powerful onmyoji and changes his name to Asakura(麻倉) Hao(葉王) meaning “Hemp“+”Storehouse/Warehouse/Treasury“ and “Leaf“+”King.” Considering the name “leaf” clearly refers back to the family name’s, “hemp” I really hate to admit it, but Hao’s name is basically “Weed Lord” of the family “Weed Stash.“ If it wasn’t clear this is also why Takei draws a lot of cannabis leaves in association with Yoh(葉) whose name is just written with the same kanji as Hao’s for “Leaf” but with an alternate reading.

Yoh’s super chill and laid back personality and his ever present headphones for relaxing to are all part of this theme in his name. This theme is also why he’s a fan of Soul Bob (aka totally-not-just-Bob-Marley) and why Soul Bob posters are everywhere in the background of Shaman King. The Asakura family crest, adapted from the Onmyodo five-path star, also resembles a leaf not unintentionally --I don’t remember if they openly refer to that fact in-world or not.

But as we follow the rest of the family tree from there we get the ancestor Yohken(葉賢) from 500 years ago, Yoh’s grandparents Yohmei(葉明) and Kino(木乃), his mother Keiko(茎子) and father Mikihisa(幹久), and eventually his son Hana(花). Also the branch family’s Yohkyo(葉虚), and his kids Ruka(路菓) and Yohane(葉羽). And you’ll probably already notice a lot of those names use the same Yoh/Ha(葉) that is the basis of both Yoh and Hao’s names.

So the rest of the family’s names go...

Yohken(葉賢) = “Leaf”+”Wisdom” which, at face value, is just naming him as a wise shaman. But it’s also basically a cheeky euphemism for “stoner logic.”

Yohmei(葉明) = “Leaf”+”Insight” synonymous with Yohken’s reading.

Kino(木乃) = “Tree”+”From/<posessive indicator>,” so “Hemp Tree” basically

Keiko(茎子) = “Stalk/Stem”+”Child” but keeping in mind that -ko(子) is just a super common suffix for girls’ names, so it’s not like she’s being called explicitly child-like or anything, her name is basically just “Stem Girl”

Mikihisa(幹久) = “Stem”+”Longtime” but I’ll come back to him...

Hana(花) = “Flower” but also a phonetic play on ha(葉) + na(ナ) from his parents’ names

Yohkyo(葉虚) = “Leaf”+”Void/Empty” (haha that’s the same “Hollow” used for Hollows in Bleach) As the head of the disgraced branch family of the Asakura house, his name reflects that he’s not part of the family, despite the family surname, by basically just calling him “No Leaf.” Technically it could also read “Fruitless Leaf” which kinda sticks to the plant imagery better, but makes a little less sense when he has kids...

Ruka(路菓) = “Way/Path/Road” + “Fruit” I assume this is meant as “Way of Fruit” like a metaphor for the fact that she’s been tasked with leading the branch family to success, and not “Road Fruit” as in fruit you’d find on the road, or by the side of the road. Although that does kind of fit in its own way.

Yohane(葉羽) = “Leaf“ + “Feather“ which I think is a play on the fact that when traced back to Jodai era(700s CE) etymology both words shared a common root word, reflecting the fact that he’s got the same ancestor as the core family, but has developed differently but in parallel.

So I said I’d come back to Yoh’s dad, Mikihisa, because as an outsider who married into the Asakura family he has an original family name other than Asakura. His full name is Miki(真木) Mikihisa(幹久) which read as “Truth“+”Tree” and “Trunk/Stem“+”Long Time“ which has some nuance to it. Obviously “Long Time Trunk” and “Tree (of) Truth“ evoke the image of an old and venerable tree with a thick and many ringed trunk. That image plays into Miki’s role as a Shugenja --there is a whole lot going on with the history of the religion, more than I can reasonably summarize, but the thing to know here is that the popular image of Shugenja in media leans into them being ascetic monks, living in the wilderness, generally forest mountains, with an association with Tengu.(Tengu are frequently dressed in Shugendo attire.)

So, the forest man is named after a big tree, pretty straight forward... The clever bit here is how once he takes the Asakura name his name can be read to match his wife’s, as the (幹) in Mikihisa and (茎) in Keiko can both read as “Stem.”

Unrelated to anything, but it’s always super weird to me that English translators insist on calling him “Mickey” (they did the same with Kaoru Miki in Revolutionary Girl Utena....)

And while I’m talking about outsiders, I’ll bring in Anna as well. Her given name is actually just written in katakana as An’na(アンナ) so, unlike Mikihisa, her name in English is untouched. But her family name Kyoyama (恐山) is written “Fear/Dread/Awe“+”Mountain“ which is both a description of her character as an imposing figure in Yoh’s teen life, but also a reference to Mt.Osore(恐山) where she first meets Yoh, which is both home to a famous Buddhist temple and a mythological location of the gate to the underworld. It is of course written with the same kanji as her family name but pronounced differently, as you can see.

The American, Alumi(アルミ) Numbirch(ニウムバーチ) is obviously named after Aluminum, as all the Patch are named after metals. I’m not really sure why the “-birch” part is in there? It might be an obtuse play on the fact that the Japanese White Birch is also called the Siberian Silver Birch, and her dad is Silva? It feels like a bit of a stretch, but I can’t think of another way “birch” would be relevant to her name. But otherwise she’s not really related to the family theme.

And not at all related to the Asakura’s, but beautiful androgynous British boy detective, Lyserg Diethel is named after the hallucinogenic compound Lysergic acid diethylamide. (aka LSD/Acid) The drug themes is part of why his spirit is named Morphine. She is a nature spirit of (of course) a poppy flower. The other reason she’s named Morphine is because Sherlock Holmes --from whom Lyserg gets his inverness cape aesthetic-- infamously used recreational morphine (and cocaine) to alleviate himself of the lethargy of being without a case to solve.

#shaman king #Shaman King Flowers #yoh asakura #asakura hao #asakura hana

190 notes · View notes

yume-tsuki · 3 years

Photo

The last stuff from my “A” folder of my Shaman King folder

Some Paper doodles The first one is Hana, Alumi and Mikihisa on they’re way home. The second one are Hana’s friends and Mikihisa’s friends playing around in the garden. The last one is Zen with his spirits, I love Okami and the Hakkenden (seven dog warriors) so here they are.All of them got names of plants.

#shaman king #zen tao #ren tao #iron maiden jeanne #men tao #hana asakura #mikihisa asakura #alumi

3 notes · View notes

triu-calia · 4 years

Photo

[ TRIÚ CALIA ] has arrived in Ardere! Under the bonfire light, this [ TWENTY FOUR ] year old [ FEMALE ] is sometimes mistaken for [ BENEDETTA GARGARI ]. Since graduating from [ BEAUXBATONS ], they have been working as a [ HEALER AT ST MUNGOS ]. Right now, they are currently residing in [ LONDON ]. [ LIV, 25, gmt, she & her ]

HELLO HELLO HELLO! please see below for an intro to my character tríú calia

- tríú cecelia calia

- twenty four years old

- beaxbatons alumi

- healer at st mungos

- based in london

- fraternal twin to @dua-calia (tríú is the youngest of the two by a minute and dua never lets her forget about it) and youngest sister to primo calia. their parents kept the trend of naming their children in the numerical order they were born, tríú being irish for third.

- she adores her siblings and even though she is the least fiery out of the three she’ll stand up for them and hold her ground when she needs too, even when she’s arguing with them.

- triú may be the youngest but she’s a bit uptight as her sister is more chaotic and out there than she is and with dua leading the charge in dumbassery, tríú has taken on the ‘big sister’ role out of the two.

- being the youngest she’s dramatic af bc she’s the baby and because she’s surrounded by dramatic af people on the daily thanks to life. if everyone else gets to be dramatic then she decided she gets to be too.

- she’s a warm person to be around and she’s a friendly and welcoming person to all. tríú hates to see anyone feeling left out or alone and would do her best to help someone feel comfortable enough to join in. she also bakes and its not unusual to see her walking around with a tub of snacks for people.

- she’s passionate about the things and people she loves in life. tríú loves reading, dance, flowers, photography, music. she wants a simple life, she isn’t materialistic and if she has the things and people she loves in her life then she’s happy.

- plant mum. she has flowers all over the place tbh

- tríú suffers with anxiety and panic attacks. when she is super anxious she has developed the habit of tearing pages of paper and folding origami paper cranes to try and keep her mind focused and to try and slow her thoughts down. Her dad taught her how to do them when she was younger and it’s something that’s always stuck with her.

i will add to this later but if anyone would like to plot plz hmu <3

xoxo

#ardereintro #tw anxiety

6 notes · View notes

the-splatoon · 6 years

Text

While Marina is sick...

The music announcing Inkopolis News sounds out in the Plaza, but today it sounds a little different from usual. Yet, strangely familiar...

Now, what do we have here...?

“So, as everyone’s homegirl, Marina, is sadly still stuck sick home in bed - Our Mailbox is still accepting Get-Well-Wishes, by the way! - today we’ve got in a special guest to pick up the slack! Everyone, say ‘Yo’ to resident Superstar and Inkopolis News Alumi, Marie of the Squid Sisters!”

“Always nice to be back... Though, I gotta admit, the redecorations you’ve done here are a little gaudy for my taste...”

“AAALL for the sake of stayin’ with the times, Big M! Y’know how it is. Out with the old, in with the new.”

“Weren’t you Team Retro though...? Way to be inconsistent about your style.”

“...Um.. yeah...”

Pearl seems slightly miffed...

“Anyway... Marie, stages please?”

“Sure. Here we go.”

“Check it! Here are the current Regular Battle stages!”

Lacking any fancy console, Marie just presses a button.

“Hey, Marina loves sampling the noise of the machinery on this map for our songs! Isn’t that kinda weird?”

“I think it’s weirder that you’re not fired yet even though you keep calling stages ‘maps’. You think people don’t notice that?”

“...!”

“Here’s the current Ranked Battle stages!”

“Checked it again the other day. The bikes here are still trash. I keep face-planting right into the dirt.”

“Have you tried a tricycle?”

“...ghhh....!”

Pearl is stewing something fierce...

“Um... Yadda Yadda... League Battle Stages...

“Ohey! Did’ya know I wrote the Camp Song? ♪ Triggerfish! Triggerfish! Pull that trigger, fish! ♪”

*cringes* “Well, thank you for the nightmares.”

-Out of nowhere, there is a record scratch. The music stops.

“..................”

“...? What’s wrong?”

“...Catfish got your tongue?”

It seems like a certain, final straw, however, was just broken. Pearl’s face is glowing red...

“....!! Ahh... Ahhhh! ARGGHHHHH!!”

“-AH!”

Quite suddenly, Pearl leaps out of her chair, at Marie.

She knocks over the boom mics and camera in the process...

...The programming is interrupted, as an annoying melody plays...

...Meanwhile...

“...”

Marina stares and blinks at the screen for a good 30 seconds before she pulls out her phone and starts rapid-typing.

#Muse: DJ_Hyperfresh #Muse: MC.Princess #Muse: Agent 2 #M!A: Sick Marina #Squid Stories

3 notes · View notes

aluminiumextrusion · 2 years

Text

Aluminium Extrusion With Correct Shape

Aluminium extrusion is wherever nowadays. From ways to machines to railings to windows and streets; it is surrounding us. Noticeable all around, working, exercise center and school, you can see it. You get contact with aluminium extrusion China at grocery store, jungle gym, at the specialists facility and in the arena and so on There are horde of items made well by means of the extrusion.

Aluminium is considered among the bountiful mineral in the outside. Despite the fact that aluminium doesn't exist in the most flawless structure in nature. Bauxite is the wellspring of aluminium. Bauxite is mined in various pieces of the globe. In 1988, a monetarily doable interaction was found for aluminiums business creation.

To separate the aluminium which gives the unrefined substance for the activity of extrusion, alumina should go through purifying and an alloying method. Through these cycles, low amounts of components like magnesium, manganese, silicon and copper are added for the formation of explicit materialistic properties.

Utilizations of Aluminium Extrusion

Following are the employments of Aluminium Extrusion

Air or military

Hardware

Buyer

Electrical

Energy

Transportation

1. Military

Following are the elements which make aluminium profile an incredible answer for aviation, airplane and military:

The shortfall of tractable at low temperature

Negligible support

Lightweight with high strength; and

The ability to give an expansive scope of usefulness into various parts.

Aluminium Extrusion has assumed a fundamental part in the previously mentioned regions for certain years. Truth be told, the Wright Flyer wherein the well known Wright siblings accomplished the underlying controlled trip back in December 1903. They utilized a cast aluminium motor square for limiting weight.

Presently, another age, amalgams containing aluminium and lithium for extrusions. Additionally, you would now be able to track down Aluminium Extrusion in:

Military vehicles

Medical clinic and order tent plans

Helicopters and airplanes

Quick sending mats

Worldwide Space station, and that's only the tip of the iceberg.

2. Apparatus

Aluminium Extrusion give assorted answers for a wide scope of hardware and gear prerequisites. The ability for executing shapes, along with low support, lightweight and high strength; makes extrusion fundamental parts of the hardware.

For robotizing processing plants, extrusions are essential for direct movements units, actuators, high strength and low upkeep and low mass. You will likewise track down the utilization of erector set framework in various working environments, run-out tables, T-opening profiles which can be joined with indicated equipment for the production of machine safeguard, industrial facility workstation and CNC prototyping.

You will experience the plan adaptability of extrusion in making an answer for a huge number of specialized, mechanical and logical hardware.

3. Customer Goods

Traits of Aluminium Extrusion recognized above, lead to their use in an expansive scope of buyer things. In a cooling framework, minuscule multiport extrusion in the condenser help in accomplishing new energy levels of effectiveness. In deck furniture, extrusion help to give the spring. In sports merchandise, they offer toughness and strength, for instance, compound bow in sport shooting.

You will track down extrusions in:

Gold trucks and vehicles

Outdoor supplies like soccer objectives, lacrosse sticks and so on

Delight boats like extras, trim, structure and so forth

Wellness gear

Stepping stools

Electric lamps

Coolers condensers

Home machine

Nursery and grass instruments like extendable saws, weed clippers and so forth

Seating in the cordiality business and then some.

4. Electrical and Electronic Equipment

With extraordinary warm and electrical conductivity, unlimited setups range and non-attractive capacities, aluminium extrusion gives assistance to a wide scope of uses relating to electronic and electrical gear.

You will track down Aluminium Extrusion in:

PCs

Nooks

Engine lodgings

Hotness sinks from least to greatest

Lighting lodgings, mountings and reflectors

Course

Connectors for modern power dissemination and transport bar

Power units

PC cases

Lodgings, racks and Electronic body

Cellphones and the sky is the limit from there.

5. Energy Sector

Aluminium extrusion has an imperative influence in the conventional age of power, appropriation frameworks and environmentally friendly power advancements. Aluminiums high warm conductivity (62% more than of copper and identical to twice that of copper as far as equivalent weight premise) has changed extrusion a best decision for electrical connectors and the arrangement of transport bar for circulation of force in offices in businesses.

Sun based Power

Extrusion is progressively becoming popular as a basic part in sun based power units due to be photovoltaic (PV), cost-productive racking and mounting answers for concentrate, concentrated photovoltaic and building-incorporated photovoltaic sun oriented power framework.

Wind Power

Extrusion can be utilized in wind power as well. From transport bar in conveying power which is created by a turbine, stepping stools and stages; extrusion and extrusion dependent gatherings assume a prominent part.

6. Transportation

Regardless of whether for trucks, transports, rail, trailers, cars, and architects are expediently turning towards aluminium profile for further developing mileage, improve execution and increment load-conveying limit.

0 notes

kseniasobchakxox · 4 years

Text

How To Reuse Your Vaped Weed [Vaping Your Weed]

Vaping your weed is one of the best ways to use your cannabis effectively. It is not only healthier than smoking, but it is also cheaper. Another advantage of using vaporizer that many cannabis users might not know about is that, you are able to reuse your already vaped bud. Vaped weed usually appears brownish and degraded. This gives the impression that the weed is no longer useful and should be thrown out but that’s not true. Before we go further into the different ways to reuse AVB or ABV, it’s important to know what it is.

What is AVB Weed?

AVB means already vaped bud while ABV means already been vaped. This is the remains of the leftover that are found in your dry herb vaporizer after you’re done with a vaping session. This vaped bud are not supposed to appear too dark, this indicates that it is still good for reuse. But there’s a possibility for the vaped bud to appear very dark. This indicates that you didn’t have a healthy sesh and the vaped weed is no longer useful for other use.

How to Tell if Your Weed is Pooched

The lighter the vaped weed also is, the more the cannabinoid content that is in it. But there’s no means to carry out any test to determine the THC/CBD content left in a vaped weed. So the only viable way to determine the usefulness of the vaped weed is by looking at the color. If the cannabis is vaped correctly, at the right temperature, it will have a roast look with a medium brown color. If the color of the vaped bud appears too dark, then you can safely discard it as useless.

What About My Vaped Weed?

Vaped weed usually contains some amount of cannabinoids that you can still put to good use. There are many ways to reuse your vaped weed and some of the common ways are water curing, making into edibles, tinctures, cannabis capsules, cannabutter, firecrackers etc. Many of these usages are discussed further in this article.

Water curing the already vaped weed

This is one of the commonest way to reuse the already vaped weed. It is a very simple process. It is a very necessary process especially if you plan to use the AVB in drinks or edibles. Water curing helps to take away the ‘weed taste’ from the weed. Water curing the weed might take a few days or up to a week. While some do it for just some few hours. It totally depends on how long you are willing to cure the weed. However, we don’t recommend that you water cure it for more than a week. Typically 4-7 days is ideal to water cure your weed.

Water curing is simply a process where you soak the already vaped weed in water for a period of time. The reason for water curing the AVB is to remove the taste and smell that the weed has after vaping. This smell and taste of the AVB isn’t usually pleasant, so it is advisable that you water cure the weed.

The process of curing is a very simple one. But for it to be more effective, it is advisable that you have a large amount of AVB first and cure them all at once. This is more ideal rather than curing them in parts and bits. Directions for water curing AVB

• Grind the AVB well and put it in a cheesecloth. Make a teabag out of the cheesecloth by tying it together in a ball tightly. This will ensure that the AVB doesn’t escape.

• At room temperature, put the teabag cheesecloth in distilled water until it is fully submerged in the water.

• Leave the cheesecloth in the water until the water becomes fully discolored. Then strain the water from the cloth completely before placing it in another fresh water or simply changing the water it was in previously.

• Continue this process until the water is completely clear or whenever you feel the process has cured the AVB enough.

• Untie the cloth and bring out the AVB from it. The process would have cured the AVB by now and it’s now good for use in oil or butter.

• You can dry the AVB in an oven at a very low heat until it dries up completely.

• Cover the AVB in a foil and freeze it overnight.

Once you’ve carried out all of the above processes, the smell and taste of the AVB would have improved vastly. Ensure you store it in a sealed container for future usage.

Decarboxylation is an important process for preparation of cannabis edibles and vaping is a form of decarboxylation. In order to turn the THCA (cannabinoid acid) into active THC, you must heat the cannabis. This process typically takes a lot of time in the oven. To create your cannabis edible, you will be needing butter or coconut oil (if you are a vegan). The potency of your cannabis edible depends on how long you spend saving up the already vaped bud.

The first thing you have to do is to infuse your butter with the AVB.

• Put the butter or coconut oil in a saucepan with the vaped weed and some amount of water equal to the vaped weed in the pan. Heat the saucepan, to a point just below boiling point, over low heat.

• It takes about 2-4 hours for the infusing process to become very effective. But you can leave the saucepan for a while longer if you want to. You just have to ensure that it doesn’t boil, rather it simmers. Allowing it to boil will reduce the potency of the cannabinoid. You should also know that this process will likely create a smell that will pollute the air in your kitchen.

• After you are done simmering the mixture, strain it through a cheesecloth or mesh sieve. This will separate the lumpy parts of the mixture. Ideally, you would want to ensure that the amount of plant matter that you get is as little as possible.

• Leave the cannabis-infused butter in the bowl to cool before you place it in the fridge overnight.

• By the next morning, the water top would have a hardened layer of butter on it. Remove this hardened butter layer and add it to any recipe of your choice. This will give you a highness from the edible that can last as long as 4 hours at least and as long as 8 hours at most.

This is one edible that you can easily infuse your weed into. It also has a fat content that helps to carry the weed and ensure that you feel its effect as soon as possible. The chocolate adds to the great taste but also create a chemical euphoria that you feel. According to studies, chocolate causes endorphins to be released in the human brain. This release increases the production of serotonin, which is the happy hormone.

Chocolate brownies are a good choice of edibles to mix the AVB with. You can as well add the AVB to just the chocolate and skip the brownies.

This is another popular method of taking cannabis. You will need a dropper bottle to be able to administer the cannabis oil directly under your tongue. This is a fast way to see the effect of cannabis. You start to feel the effect of the weed as early as 15 minutes from the time you administer it. And this effect can last for hours. You just administer 2-3 drops of the oil under your tongue and hold it there for about 30 seconds.

You can also make cannabis tincture from the remains of your vaped weed.

Directions

• The first thing to do is to get an alcohol, add the weed to it and leave the weed to steep. Once in every while, shake the mixture gently. Leave the mixture for a few hours or a few days. The potency of the cannabis in the mixture depends on how long you leave the mixture alone. It becomes more potent when you leave it for a longer while.

• After leaving the mixture for a few days, strain it through a fine mesh, sieve or a cheesecloth. Store it in a dark container, away from the sunlight, in a cool place.

You can apply the mixture with a dropper bottle under your tongue. You get the benefit of the cannabinoids left in this AVB mixture within minutes of applying it under your tongue. And it is as potent as other high quality cannabis oils, especially if you leave the mixture for a longer while after adding the weed to the alcohol.

You can use your already vaped bud in a lot of ways once you add butter to the AVB. Adding butter makes it a versatile source of food, you can spread it on a toast for breakfast in the morning or you can bake it.

Direction

• To make the weed butter, the first step to take is to melt the butter. Then you add the already vaped bud to it.

• Place the mixture of butter and AVB on a low heat for a period of 40 minutes.

• Take it off the heat before straining the butter into a butter sieve using a sieve.

• In order to extract the cannabutter, you have to push the herb very firmly against the sieve you’re using for the extraction.

• At this point, you don’t need the cooked herb, so you can discard it.

Refrigerate the butter, and if you need to stock it up, you can freeze it.

It might not be a good idea to add the AVB into your morning coffee or morning tea directly. This is because of the taste and smell of the AVB. It might just spoil your tea or coffee for you. But you can add a little of your cannabutter into your morning coffee. It might not sound right taking butter with coffee. But it’s quite good and a lot better than directly adding the AVB into the coffee. Adding cannabutter to your tea might not have a taste as good as adding it to the coffee.

A very stealth and easy way to take in THC is to take it in capsules, rather than smoking it. Making THC capsules on your own is a relatively easy thing to do. And it’s possible for you to reuse your vaped weed to make these capsules.

It is not right to throw raw AVB into a capsule. So the first thing to do is to infuse the already vaped bud into coconut oil. Add half teaspoon of lecithin into this coconut oil and AVB mixture before pouring it into the capsule. The dosage of the capsule will depend on the potency of the AVB and the ratio of oil. You can start with one capsule, then two, see how you react to it and determine what your dosage is.

This is another very easy way to make cannabis edibles and it requires little to no effort. All you need to do is to get some graham crackers and spread a little peanut butter on it. Then sprinkle some of the AVB on it before sandwiching them together. Wrap up the cracker in an aluminum foil and bake it in the oven for about 10 to 15 minutes, in a temperature of around 365oF.

You can also use saltine crackers with Nutella. You can add coconut oil to it to increase the amount of fat needed for THC metabolization to take place. You have to realize that with these crackers, you can only eat more and not less. This means that you can have a very intense experience depending on how much you can tolerate. So it is advisable that you start eating it slow. Then wait for a while, maybe 30 minutes at least. See how you react to it before determining whether to eat more or not. Unless you are already familiar with the effects of the initial dose of crack that you took, it is not advisable that you eat more of it.

It is actually possible to still use the already vaped weed to make concentrates. But you have to know that you will be needing a large quantity due to the potency of the cannabinoid in the AVB which is lower than that of normal concentrates.

The best way to extract the remaining THC is by using a solvent like alcohol or a rosin press. After extracting the remaining cannabinoids, the next step is to dab the concentrates. You can do this using the wax pen or a vaporizer that is equipped with oils and vaporizing wax.

This isn’t something that you see every day but some people actually like to sprinkle their AVB on a pizza. If you don’t mind doing this, I recommend that you get a fresh and thin crust that would not require you to heat it too much, so that you don’t end up overcooking it. You can mask the AVB’s taste by adding some other flavorsome and more powerful toppings on your pizza and maybe some very strong cheese.

Coconut oil is a very versatile ingredient that is used regularly for stirring, frying, and baking. You can also add it to coffees and teas. It is not only versatile, it is also a very tasty ingredient.

Coconut oil has a lot of health benefits, including having natural saturated fats in it, which is good for the health of the heart. For this cause, the most important feature of coconut oil is the level of effectiveness it has in carrying AVB. It absorbs THC a lot better than other carriers with less fats. This makes the infusion of the AVB very potent. This is one of the reasons why many users prefer to use coconut oil. When making brownies, coconut oil can also be added as one of the ingredients that is used.

You can use the AVB to make your own rick Simpson oil. It will obviously not be as potent as the dry herb that has not been vaped at all. but it is believed that it still has as much as 40 percent of the original THC content present in the AVB.

You can extract the THC from the AVB but you will be using some alcohol in the process. It is not exactly a straightforward process and it might require you making some research before going through with it.

Most people prefer to use dry herbs so they can get the highest level of THC that can possibly get. But in the absence of dry herbs, the already used bud is still a very good and viable option. It’s definitely one you should try out. If you’re someone who naturally enjoys blending and taking smoothies, then this should be an easy addition to the process.

Vaped weed are more useful than many people know them to be. These are ways you can use your AVB and still enjoy the THC left in it.

#AVB Weed How to Vape Cannabis How to Vape Weed marijuana vaping marijuana vaping weed weed

0 notes

eroticlamb · 2 months

Text

photos from alumi-plant 's old blog ₊˚⊹♡

#photography ♡#alumi-plant #egl community #sweet lolita #pink #shiro lolita #japanese fashion #jfashion

803 notes · View notes

miamibeerscene · 7 years

Text

Philipsburg Brewing: Making Local Beer in a Charming Montana Town

The brewery is in a quaint Montana mining town. (Credit: Philipsburg Brewing)

April 24, 2017

You might think everything’s big in the Big Sky State of Montana, but Montanans like to keep a few secrets, and one of them is that size doesn’t matter.

In a state with barely a breath over one million people spread over 147,000 square miles, Montana has nearly 200 towns with less than 1,000 residents. And a half-dozen of these towns have their own brewery, but one in particular, Philipsburg, has two breweries, technically.

(VISIT: Find a Brewery Anywhere in the U.S.)

Philipsburg is a charming 19th-century mining town with a population of 800, and it’s considered a gem for residents and visitors alike. The town sits about 30 miles off of I-90, southeast of Missoula, Montana (also home of the Big Sky Brewing). The town is nearly dead center between Yellowstone and Glacier National Parks, and it lies in the heart of Montana sapphire country. In its prime, Philipsburg boasted over 2,000 residents, but when the price of silver crashed in 1893 the town evaporated to hardly over 100. And for the last 120-plus years, it’s been making a comeback.

It’s here that Philipsburg Brewing Company would lay its claim for quenching the thirst of local and visiting beer drinkers. In 2012, the brewery opened in the historic Sayrs Building at the corner of Broadway and Sansome Streets thanks to founders Nolan Smith, Cathy Smith and Rob Jarvis. With an ornate Victorian façade, the building is arguably the symbol of downtown Philipsburg.

“We’re so lucky to have this corner of Montana where people love to be outside as much as they love drinking local beer,” says Cathy Smith. “We are where we are today because of locals, and we’re constantly seeing new visitors thanks to this charming town.”

The brewery has won several medals since opening in 2012. (Credit: Mike Chilcoat)

For four years, the 10-barrel brewery produced no more than 900 barrels of beer annually, but it spun those precious gallons into gold, and silver, and bronze, respectively. In their short tenure, Philipsburg Brewing Company has won gold and silver medals from the North American Brewers Association and Best of Craft Beer Awards, a silver medal from the World Beer Cup, and a bronze medal from Great American Beer Festival.

Regionally, Philipsburg Brewing Co. beers fair very well. Its Rope Swing Saison won Best of Show, Best of Montana, and Best Saison at the 24th Annual Garden City BrewFest in Missoula in 2016. It’s a brewfest that had 70 beers competing, most of them made in Montana.

(MORE: 12 Breweries in Historic Locations)

Made in Montana Means Something

Being a beer made in Montana carries a certain reputation. For one, Montanans like beer. The state receives a variety of “Top 10” accolades for its breweries-per-capita, gallons produced per adult, America’s Best Beer Town, etc. However, Montanans like something else just about as much as beer, and that’s playing outside, so not only do Montana breweries have to make good beer, they have to offer it in ways that are fit for consumption out-of-doors.

“This is a major factor why Philipsburg Brewing Company expanded in 2016 and started bottling its beer in Ball’s Alumi-Tek aluminum bottles,” says Maddy Mason, sales & marketing manager for Philipsburg Brewing Company.

The aluminum cans fit the area’s outdoors lifestyle. (Credit: Philipsburg Brewing)

This is the point at which Philipsburg got its second brewery. No more than a mile away from the original brewery, Philipsburg Brewing Company opened a 50-barrel production brewhouse with a full aluminum bottling line. The new brewery is producing 3,000 barrels annually and bottling over a thousand cases every month.

“No one is using this kind of bottle at this kind of scale,” says Mike Elliott, head brewer for Philipsburg Brewing Company. The Alumi-Tek bottle features a recyclable aluminum bottle with a screw-top lid, ideal for having in the boat while fly fishing Montana’s blue-ribbon trout streams. Not only does it keep the beer in the bottle, but a few Montana rivers have a ban on glass containers.

Welcome to The Springs

The new brewery location, dubbed “The Springs,” is actually a very old brewery location. It was the site of Philipsburg’s original brewery, Kroeger’s Brewery, which operated in the 1870s. In fact, the original hop tower still stands on-site, as does the original brewer’s house, which Charles Kroeger lived in from 1875 to the early 1900s.

The nickname “The Springs” comes from the fact that the brewery sits over a network of 11 different mountain springs running underground that produces 300 gallons of water per minute. The Kroeger Brewery decided the springs made excellent beer, and the brewery was right, up until it was shut down by Prohibition.

(BEER TRAVEL: A Beer Lover’s Guide to Albuquerque’s Wells Park Breweries)

Mysteriously, the original brewery burned down shortly after it was shut down, and the lot sat empty until the 1990s, when a group from Missoula opened a bottled water plant fed from the same springs. Called Montana Silver Springs, the bottled water company operated from 1994 to 2004.

Fast forward a decade, Philipsburg Brewing Company saw an opportunity to harness the springs to make more beer and bought the site in 2014. To help with their million-dollar-expansion, the Smiths and Jarvis secured a $50,000 matching grant from the state’s Growth through Agriculture program.

With the new bottling line distribution for Philipsburg Brewing Co. was able to more than quadruple and add Helena and Bozeman to its footprint. The first beer to be bottled was Tramway Rye Pale Ale, a flagship for the brewery. Next, the brewery bottled its Otter Water Session Pale Ale, followed by the latest offering, Haybag American Hefeweizen. All three styles are sold in 4-packs of 16-ounce bottles.

All of Philipsburg Brewing Company’s beers are made with Montana 2-Row barley and 100 percent whole leaf hops. In addition to the aluminum bottles, beers are available on tap throughout the western half of Montana and occasional special releases, such as Badfinger Imperial Stout, are hand-bottled in 750ml.

The post Philipsburg Brewing: Making Local Beer in a Charming Montana Town appeared first on Miami Beer Scene.

from Philipsburg Brewing: Making Local Beer in a Charming Montana Town

#Philipsburg Brewing: Making Local Beer in a Charming Montana Town

0 notes