rufiohwxngs-blog
goldfish water temperature
water temperature for goldfish
3 posts
Don't wanna be here? Send us removal request.
Last Seen Blogs
raine-hearts-art
Here's To Being Less Messed Up
kris-sophie
Bunnylove
saybuddy-blog
Make Your Life Better
infumable-blog
ƑFΣΠΦiz3
ganondorves
Courage is Contagious
Text
Water tests for the aquarium
Water tests check the water values of the aquarium
Important values are the pH value, the carbonate hardness, the carbon dioxide content, the total hardness, the nitrite value and the nitrate value.
Animals and plants put their individual demands on the water values in an aquarium. Unfortunately, an aquarist can not find out the water levels through observations alone. With the mere visual inspection is not recognizable, which substances are present and in which concentration they are in the aquarium water.
Here it is necessary to resort to water tests for the aquarium. Animals and plants can only feel well in an aquarium if the biotope is friendly to them. The handling of water tests for an aquarium, however, is not so easy, especially for newcomers to the aquarium.
You should study this topic intensively so that the tests can be meaningful in their results. Below you will find basic information about which water values of an aquarium should be checked frequently and how to deal with the various water tests so that they are helpful.
The best water tests for the aquarium
Which water values can you determine with water tests for an aquarium?
Which water values should be checked with the help of the water tests depends strongly on the animals and plants kept therein. So an important basis is the needs of the animals and plants, so that every aquarist must decide for himself which values he keeps in mind. Many aquarists check the following values: pH value, carbonate hardness, total water hardness, carbon dioxide content and the presence of nitrite and nitrate in aquarium water.
In addition to water tests for the aquarium, which only control one of the above values, there are numerous tests that show the ammonia, iron, phosphate or copper content in aquarium water. Decisive for the choice of the water test, however, always the occupation in the Beckn as well as already existing problems, which are well-known to the aquarist.
The most important consideration is to avoid sudden temperature changes. The temperature should be at most 1-2 degrees per day. Otherwise, fish deaths may occur. To answer your other question, change the aquarium water once a week by 20-25%. In this way, your water is cleaned and the amount of oxygen in the water is increased. The water you added should be rested and clean. The rested water is purified from chlorine. To avoid shock, the added water temperature must be the same as for aquarium water.
soruce: https://pawbeak.com/goldfish-water-temperature/
Begin by using water tests for an aquarium or continuously testing them?
The question of how the water levels in an aquarium develop when the pelvis is being retracted is particularly topical. In this period it is important to test the nitrite in the water. In the run-in phase, nitrite is normal in an aquarium. However, since it is very toxic to fish and other aquarium inhabitants, the nitrite content must be normalized before being stocked with aquarium animals.
Whether the aquarium water is already suitable for the animals, can be found out with water tests for the aquarium. It is always important that the water tests unfortunately do not give very accurate results and that these results, as with nitrite, must be properly assessed with expertise. Only after a nitrite peak, when all other essential water values are right, can aquarium animals inhabit the aquarium. The stocking is slowly increasing.
Water tests are not only important in the warm-up phase. The ecosystem in an aquarium is very sensitive, so that the water values can change at any time. Therefore, it is recommended to test the water regularly, if you want to be sure that the aquatic animals stay healthy. Even excessive algae growth occurs - the causes of the problem can be revealed by water tests. Just carrying out water tests does not change the quality of the water yet. The values must be the occasion to initiate measures that increase the water quality.
A relatively small member of the carp family (which also includes the Prussian carp and the crucian carp), the goldfish is native to East Asia. It was first selectively bred in ancient China more than 1,000 years ago, and several distinct breeds have since been developed. Goldfish breeds vary greatly in size, body shape, fin configuration and coloration (various combinations of white, yellow, orange, red, brown, and black are known).
source: https://en.wikipedia.org/wiki/Goldfish
How to deal with water tests?
In order for water tests to give relatively accurate results, they must be used in accordance with their instructions. Otherwise, measuring errors may ensue that unsettle or pacify an aquarist. Concentrating on water tests should therefore be done in a concentrated way. The remaining noh available water tests are to be kept according to the instructions of the manufacturers. Water tests can become unusable if not properly stored. If you need a lot of different water tests, the retailer has sets for you that are delivered in practical suitcases.
0 notes
Text
Moonlight for the aquarium
An atmospheric atmosphere with moonlight in the aquarium
The newcomer to the aquarium world is probably wondering why you should buy an aquarium moonlight lighting. However, it is not so outlandish as it may seem at first glance. On the one hand, the moonlight is a pretty effect for the nightly dwelling, when the aquarium lights up its corner in dazzling blue or a slight white shimmer. On the other hand, it also has a positive effect on the inhabitants of the underwater world if they do not have to wander in unnatural darkness at night. Finally, moonlight lighting allows the interested aquarium owner to observe nocturnal activities that would otherwise disappear in pitch-dark night.
What is the effect of the moonlight in the aquarium?
If you decide to install a moonlight illumination in your aquarium, you have the choice between blue and white light. Currently, the blue light is more common, although white light more authentically simulates the moon. One reason for the blue light spectrum is that the moonlight comes from the area of saltwater aquariums. Seawater filters out the red and yellow spectrum, leaving only blue light at the end. In the end, it does not matter to the fish and other inhabitants of the aquarium, however, what color appears on them at night. The main thing is that the light is not too bright. Common are lamps with a power of one to five watts. Everything from ten watts is too bright and disturbs the nocturnal regeneration and resting phase.
Moonlight for nocturnal animals in the aquarium
Ultimately, the key criterion for deciding the color of the moonlight is which light you like better in your home. Finally, the lighting also fulfills a decorative purpose. In addition, it allows observation of the water inhabitants during the night hours. If you have nocturnal animals in your aquarium, such as shrimp or snake stars, you will not get much of them during the day. With the moonlight you do not disturb the ecology in the aquarium and still can observe what happens after sunset. And while you're at it, you can track down unwanted visitors, such as snails or bristle worms.
Although the aquarium moonlight lighting is more commonly used in saltwater, it is equally suitable for freshwater aquariums. For fish, the gentle light offers several advantages. Thus, the transition from full daylight to absolute darkness can be softened, which protects the animals in the aquarium from stress. If there is natural lighting throughout the night, small fish or juveniles can orient themselves better. Dodge from predators is thus facilitated. At the same time, the risk of injury decreases when the fish suddenly panic around with surprising noises.
In search of a moonlight lamp you have a large selection.
Aquarium moonlight through aquarium moonlight illumination
Most widespread are LED lamps in waterproof housing. They require little power, have a long life and produce no unwanted heat. The assembly is usually done with the help of a suction cup, which can be attached anywhere in the aquarium. If the hold is not so good, just put a drop of silicone on it. Partly the moonlight illuminations are programmable. With a remote control on and off times and sometimes the brightness levels can be specified. If you own a slightly larger aquarium, you can attach a moonlight on one side only. This leaves the animals free to decide which brightness level is best for you.
0 notes
Text
Aquarium external filter advantages and disadvantages
Comparison of external filters and inner filters for aquariums
The direct comparison between the aquarium filter and the aquarium filter reveals the first clear difference: one filter sits directly in the basin and the other is placed outside. This brings many benefits. In the following we want to contrast the individual features, the functions and the advantages of the filter media, in order to make the selection easier for you.
The basis for an intact biological balance
A foundation to maintain proper living conditions in an aquarium is a sophisticated filtration system. In addition, many species of fish have additional lighting and heating. The main task of filters is to lift suspended particles, plant remains and food residues, as well as other forms of dissolved compounds that contaminate the water and eventually turn into toxic and harmful substances.
When selecting the internal filter and the external filter are opposite. Still, the internal filter, probably due to its low purchase price, is one of the most common filter types. However, the aquarium internal filters quickly reach their limits as soon as the water volume increases.
Cheap entry into the aquarium
Among the cheap forms include filters such as the Hamburg mat filter. In return, so-called external filters are suitable as pot filters for larger aquariums. There are also gravel filters and sand filters. Soil filters rely on systems by using the gravel at the bottom for filtering. Especially in Germany, these filter types are extremely rare. One thing is common to all filters: They work according to an innovative functional principle.
In this context, however, you should keep in mind that just at the beginning the necessary amount of microorganisms is not yet available. So it is advisable to operate a brand new aquarium only once for a few weeks with the external filter and without fish. As a result, it is possible to naturally colonize microorganisms. In some cases, the trade also offers a so-called filter starter, which accelerates this process.
Comparison: Advantages and disadvantages for external aquarium filters and aquarium filters
In contrast to the internal filter, external filters are able to handle even larger amounts of water up to 2000 liters effortlessly. They are placed outside in the immediate vicinity and can be hidden very pleasantly and discreetly in the closet or on the shelf. Consequently, you will have much more space inside the aquarium for the fish and the design with plants. In this context, we recommend finished cabinets for aquariums. These combine a stable standing area for the aquarium and in the lower area a closed cabinet or a shelf, where all utensils as well as the external filter find place.
Especially the intake manifolds should be secured in advance with both filters. Otherwise, just very small fish and water inhabitants could be sucked by this filter. With regard to the selection, it is important to pay attention to reliability, because even the smallest interruption of the filter can have serious consequences. The water levels could rapidly deteriorate, which affects the health of the fish. In any case, you should make a point of maintaining an external filter regularly in order to minimize this risk as much as possible. The biggest danger in the event of a defect is water leaking and, as a consequence, water damage spread over the entire apartment.
Especially when the pool is larger, the purchase of an aquarium filter should be envisaged. The units are suitable for the volume and the pool size in terms of their performance. That may be one reason why many traders always sell their external filters in liters. Various filter materials can be used to adapt the respective performance to individual needs.
For beginners and small aquariums: the internal filter
Basically, internal filters and outsiders belong to the most common forms for cleanliness and order and for a stable, biological system in the aquarium. Only in a direct comparison and product test are there concrete advantages and disadvantages. In most cases, the aquarium inner filter is attached via suction cups directly to the disc inside. One to two filter chambers are equipped with filter wadding or filter sponges. In the lower part of the filter sits a water pump that sucks in the water and gives clear and clean water at the top.
Advantages of internal filters:
Inexpensive filter method for beginners and smaller pools
in case of defects, no water can escape from the basin
Disadvantage:
Install protective device in front of the intake basket
regular maintenance, otherwise water damage in case of defect
rather rare washing out of the filter media
more expensive to buy
Need for more space
Especially for beginners and smaller pools is usually the internal filter is the better choice. However, if you want to build a coherent basis right from the start and equip yourself with a professional set, we strongly recommend a powerful aquarium external filter. In principle, the filtering method that suits your pelvis, the fish and your achievements will decide.
1 note
·
View note