It does not matter whether you are a pro or an amateur, taking your own kitchen cabinet measurement seems appropriate and beneficial. It saves both your’s and the designer’s time and besides it is not a hard venture to undertake all by yourself. Most renovation companies usually advise their client to take their own cabinets measurements.

Basically, all you need is a pen, paper and tape measure, plus knowing the center points of where you would like your cabinets to be placed. However, you do not need to worry, just follow the steps mentioned below:Sketch it out

First and foremost, you do not need to be an expert, hence it does not have to be a ‘wow’ factor, and it is just a simple sketch of what you want. Also, you should determine where you want your cabinets to be, but before that you need a blueprint illustrating the vision of your kitchen, for instance the placements of your appliances, windows, and doorways.

While measuring, correspond your numbers accordingly and in a clear and concise way, so as to comprehend it easily when you look at it later on or explaining it to your cabinet designer.

Measure your wall length

No doubt, this is a crucial step, it requires for you to be familiar with the space you are about to work. Take a step back and look at it, start with your kitchen walls and measure your island length-wise then round it up to the nearest 1/16 an inch.

Depending on what you want to change, it can either be an entire wall or just a portion where you want to place your cabinets. Keep in mind that if you only want to replace your cabinets a whole wall entire length is not required, just the current cabinet measurements.

Nonetheless, the same does not apply when you are adding cabinets or changing your kitchen layout, this will help you know where to place your appliances or if you can widen your cabinetry in future.The center point of your sink, stove and window

These are mostly the areas that do not need to be touched, unless you want to configure your kitchen’s layout. It might sound odd, but knowing these center points is going to determine the correct position of the cabinets around them.

Likewise, start with your sink, to find the midpoint, measure the whole thing all together and stop when you reach the center. As mentioned, remember to always round it up to the nearest 1/16 of an inch.

Your stove, do it as you did to the sink, and just a bit of information, it can be quite expensive to move your electrical or gas cooking line, but if you want to, why not! Keep abreast of your island and its location, while measuring you begin at one end going on to the next.

Last but not least, your windows requires the length and width measurement, it makes sure that your cabinets are placed properly, always include the trims.Measure your ceiling’s height

This will give you an idea of the cabinet’s height and placements:

Lower cabinets- 34½ inches

Countertops thickness: 1½ inches

Backlash height: 18 inches

To get the upper cabinet appropriate height, subtract the above measurements from the ceiling’s height, the remaining space is what you need.

Ultimately, if your ceiling is more than 9ft tall you can always consider double-stacking as an option, but otherwise for extra advice just contact us at Premium Cabinets of Austin

Call John Henke at: (512) 812-0056 or email him directly: [email protected]

Premium Cabinets provides you the best kitchen cabinets, chocolate cabinets, wood cabinets and shaker cabinets in all over the Austin. We satisfy our all the customers.

http://premiumcabinets.com/austin/

Every client has the ability to customize their cabinetry through coloring. Hence, the purpose of the purpose of this article is to describe to you the various ways of achieving that painted surface that you have always wanted. You might be having good cabinet that require a little touch of something that you cannot place your hands on it. You can either paint them or purchase new cabinet boxes on cheap stores such as IKEA. Painting may be time consuming, but trust the end result is always worth it. How to paint your kitchen cabinets First and foremost, using TSP (TriSodium Phosphate) or a TSP alternative remove any grease and dirt, but that is after removing doors and drawers to perform thorough cleaning on the surface. In case of hole or patches, dent with a paintable wood filler, then sand the surface with medium-grit sandpaper. Further, after sanding using a dry cloth remove all the dust. Prime: Ready to apply the primer? If your cabinets are a deep and intense shade, it is important to add pigment to the primer so that it could rhyme with the final coat. Afterward, you can sand it up again to achieve a super-smooth finish for that long-lasting and durable cabinet. For the last sanding activity always use fine-grit sandpaper. Clean: Make sure the intended painting area is free of dust, next you should decide on whether you want to use a spray or brush paint. Keep in mind that spray painting is messy, hence you can put plastic sheeting on nearby surfaces; alternatively, use the highest quality paint brush that might be angled to paint detailed areas. At least two coats of paints are required before adding semi-gloss which makes the cabinet east to clean and durable. Installation: Consequently, make sure the paint gets dried before attaching the boxes together, unless you want your paint to chip off, consult your retailer on the amount of curing time. Reasons for painting It prevents your kitchen from looking cold and sterile by adding that modern touch to it, particularly when you have a carbonized strand woven bamboo floor. Adds sophistication to your décor, for instance you incorporate black painted cabinets with steel porcelain tiles and Brazilian walnut floors. Turquoise can work well in any interior especially when used with warm and honey stained oak floor. Nothing better than to stimulate your appetite with the color Red, appropriate choice for the kitchen especially with muted dark green accent. If you want a subtle look you can try out bold colors on the base, islands and peninsula cabinets. Enables pairing, for example you can match stainless steel finishes with a cherry-stained/ painted oak floor. Try playing around with color by adding a pink accent to it; however it should be used limitedly. Ultimately, some folks paint according to a certain trend fearing that they might get tired of it in the near future, but the good thing about painting is that you can change the overall look when you get bored with it. To get more painting advices contact us at Premium Cabinet Austin.

Premium Cabinets provides you the best kitchen cabinets, chocolate cabinets, wood cabinets and shaker cabinets in all over the Austin. We satisfy our all the customers.

http://premiumcabinets.com/austin/

Premium Cabinets offers you to buy affordable kitchen cabinets, cabinets door, chocolate cabinets, espresso cabinets and shaker cabinets in Austin.

So you think you want to tackle a kitchen remodel. The first thing that needs to be planned is the budget.  When working with clients, sometimes they are reluctant to share exactly what their budget is.

It makes a huge difference in getting the look and quality that you expect.  Here are a few things to take into consideration.

The first is what can you afford? On average the kitchen is the most expensive room in the home and kitchens sell homes. Call your local realtor if you need some advice on your project. Think about how you will pay for your remodel? Home equity loans are usually the source, but often retailers will offer financing. Savings, credit cards work a tax refund or if a dearly departed loved one left you a “little something”.

How long are you going to live there?  If this is your “forever home” design it the way you want it.  If 5 years or less, keep it general enough to appeal to the masses.

Is your neighborhood modest or up-scale? You don’t want to have a gourmet chef’s kitchen in a middle-class neighborhood. If so you will lose money.  Be careful not to over improve.

Know the cost break down. Labor will cost about 20-35% of remodel costs. The kitchen typically is the most expensive room in a home with cabinets being the biggest chunk of it.  Here is a breakdown of the costs on average:

35% cabinets

20% labor

20% appliances

10% windows

5% fixtures

3% fittings

7% other

Always tell your designer / remodeler what your budget is.  Never be embarrassed to share that number with them. They should be aware, so they can give you the look you want, with the function you need, all within your means.

After all, they want you to be happy and “Love where you Live!“

Premium Cabinets Austin 2335 Kramer Lane, Ste A Austin TX 78758 Phone: 5122228060 [email protected]

Premium Cabinets offers you to buy affordable kitchen cabinets, cabinets door, chocolate cabinets, espresso cabinets and shaker cabinets in Austin.

Premium Cabinets offers you to buy affordable kitchen cabinets, cabinets door, chocolate cabinets, espresso cabinets and shaker cabinets in Austin.

To begin with, on the previous article we spoke about some various ways in which to add a plate rack to your kitchen cabinets. As mentioned, they make it much easier to access your everyday dishes and they are not meant for special dishes as they will just get dusty, instead of pulling out stacked utensils from the wall cabinet, you can easily store them vertically within distinctive slots allowing you to grab them at the same time putting them away with ease without chipping. Read on for more tips and tricks on how to use plate racks:

Carve out a niche: The unused wall space on the fireplace and wall might be the perfect spot to make a plate rack. It can either be for functionality or aesthetic purposes and a little niche created by an unoccupied wall depth is a creative way in getting extra storage for your utensils.

Additionally, plate racks do not necessarily need to be installed in kitchens; however, they can be in a butler’s pantry or a vestibule area. It is important to know that thinking of a space that might be overlooked can actually turn out to be spectacular; also, it gives an existing kitchen more extra storage space.

To bring out the plate rack and make it stand out more, you could try using bold colored plates; for instance, red plates peeking out can pick up the accent colors that may used throughout the rest of this modern kitchen. Stacking dishes could lead to scrapes and chips, to give your plates a break you could try racking them lower on your plate rack.

For a colorful and eclectic display, you can mix up china patterns and colors, keep in mind that the plate rack comes off as streamlined in a contemporary space. For an added vintage look to your kitchen, you could try using a file-holder unique plate rack next to the kitchen’s dishwasher, close so as store heavier pieces. Additionally, you can use this similar principle to organize slender kitchenware such as pans and bread boards.

If you have a small and quirky space and don’t really have the option of using a symmetrical wall cabinets design on both sides of your space, an unfitted dish rack cabinet is the way to go so as to get the storage problem sorted out without having to force the balance issue. This solution allows you to kill two birds with one stone at the same time baking a cake and having to eat it too.

It is important to know that a plate rack integrated into open shelves can work as an Uber-functional storage wall where your cabinets can sit on the countertop. Moreover, it is a mixed use storage wall that uses a small section of the countertop for prepping or tasking. The amount of door sizes ranging from open to closed storage create a much more visual interest that cabinet doors which are all the same size. You do not need to limit yourself on using plate rack alone; however, you can get more out of the cabinets by installing an appliance storage system below the open shelves.

For more information and cabinet tips, do not hesitate to call Premium Cabinets Austin today at (512) 812-0056.

Premium Cabinets offers you to buy affordable kitchen cabinets, cabinets door, chocolate cabinets, espresso cabinets and shaker cabinets in Austin.

Premium Cabinets provides you the best kitchen cabinets, chocolate cabinets, espresso cabinets and shaker cabinets in all over the Austin. We satisfy our all the customers.

http://premiumcabinets.com/austin/

Premium Cabinets offers you to buy affordable wood cabinets, kitchen cabinets, cabinets door, chocolate cabinets, espresso cabinets and shaker cabinets in Austin.

It does not matter whether you are a pro or an amateur, taking your own kitchen cabinet measurement seems appropriate and beneficial. It saves both your’s and the designer’s time and besides it is not a hard venture to undertake all by yourself. Most renovation companies usually advise their client to take their own cabinets measurements.

Basically, all you need is a pen, paper and tape measure, plus knowing the center points of where you would like your cabinets to be placed. However, you do not need to worry, just follow the steps mentioned below:Sketch it out

First and foremost, you do not need to be an expert, hence it does not have to be a ‘wow’ factor, and it is just a simple sketch of what you want. Also, you should determine where you want your cabinets to be, but before that you need a blueprint illustrating the vision of your kitchen, for instance the placements of your appliances, windows, and doorways.

While measuring, correspond your numbers accordingly and in a clear and concise way, so as to comprehend it easily when you look at it later on or explaining it to your cabinet designer.

Measure your wall length

No doubt, this is a crucial step, it requires for you to be familiar with the space you are about to work. Take a step back and look at it, start with your kitchen walls and measure your island length-wise then round it up to the nearest 1/16 an inch.

Depending on what you want to change, it can either be an entire wall or just a portion where you want to place your cabinets. Keep in mind that if you only want to replace your cabinets a whole wall entire length is not required, just the current cabinet measurements.

Nonetheless, the same does not apply when you are adding cabinets or changing your kitchen layout, this will help you know where to place your appliances or if you can widen your cabinetry in future.The center point of your sink, stove and window

These are mostly the areas that do not need to be touched, unless you want to configure your kitchen’s layout. It might sound odd, but knowing these center points is going to determine the correct position of the cabinets around them.

Likewise, start with your sink, to find the midpoint, measure the whole thing all together and stop when you reach the center. As mentioned, remember to always round it up to the nearest 1/16 of an inch.

Your stove, do it as you did to the sink, and just a bit of information, it can be quite expensive to move your electrical or gas cooking line, but if you want to, why not! Keep abreast of your island and its location, while measuring you begin at one end going on to the next.

Last but not least, your windows requires the length and width measurement, it makes sure that your cabinets are placed properly, always include the trims.Measure your ceiling’s height

This will give you an idea of the cabinet’s height and placements:

Lower cabinets- 34½ inches

Countertops thickness: 1½ inches

Backlash height: 18 inches

To get the upper cabinet appropriate height, subtract the above measurements from the ceiling’s height, the remaining space is what you need.

Ultimately, if your ceiling is more than 9ft tall you can always consider double-stacking as an option, but otherwise for extra advice just contact us at

Premium Cabinets of Austin

Call John Henke at: (512) 812-0056 or email him directly: [email protected]

Premium Cabinets offers you to buy affordable kitchen cabinets, cabinets door, chocolate cabinets, espresso cabinets and shaker cabinets in Austin.

It does not matter whether you are a pro or an amateur, taking your own kitchen cabinet measurement seems appropriate and beneficial. It saves both your’s and the designer’s time and besides it is not a hard venture to undertake all by yourself. Most renovation companies usually advise their client to take their own cabinets measurements.

Basically, all you need is a pen, paper and tape measure, plus knowing the center points of where you would like your cabinets to be placed. However, you do not need to worry, just follow the steps mentioned below:Sketch it out

First and foremost, you do not need to be an expert, hence it does not have to be a ‘wow’ factor, and it is just a simple sketch of what you want. Also, you should determine where you want your cabinets to be, but before that you need a blueprint illustrating the vision of your kitchen, for instance the placements of your appliances, windows, and doorways.

While measuring, correspond your numbers accordingly and in a clear and concise way, so as to comprehend it easily when you look at it later on or explaining it to your cabinet designer.

Measure your wall length

No doubt, this is a crucial step, it requires for you to be familiar with the space you are about to work. Take a step back and look at it, start with your kitchen walls and measure your island length-wise then round it up to the nearest 1/16 an inch.

Depending on what you want to change, it can either be an entire wall or just a portion where you want to place your cabinets. Keep in mind that if you only want to replace your cabinets a whole wall entire length is not required, just the current cabinet measurements.

Nonetheless, the same does not apply when you are adding cabinets or changing your kitchen layout, this will help you know where to place your appliances or if you can widen your cabinetry in future.The center point of your sink, stove and window

These are mostly the areas that do not need to be touched, unless you want to configure your kitchen’s layout. It might sound odd, but knowing these center points is going to determine the correct position of the cabinets around them.

Likewise, start with your sink, to find the midpoint, measure the whole thing all together and stop when you reach the center. As mentioned, remember to always round it up to the nearest 1/16 of an inch.

Your stove, do it as you did to the sink, and just a bit of information, it can be quite expensive to move your electrical or gas cooking line, but if you want to, why not! Keep abreast of your island and its location, while measuring you begin at one end going on to the next.

Last but not least, your windows requires the length and width measurement, it makes sure that your cabinets are placed properly, always include the trims.Measure your ceiling’s height

This will give you an idea of the cabinet’s height and placements:

Lower cabinets- 34½ inches

Countertops thickness: 1½ inches

Backlash height: 18 inches

To get the upper cabinet appropriate height, subtract the above measurements from the ceiling’s height, the remaining space is what you need.

Ultimately, if your ceiling is more than 9ft tall you can always consider double-stacking as an option, but otherwise for extra advice just contact us at

Premium Cabinets of Austin

Call John Henke at: (512) 812-0056 or email him directly: [email protected]