pictureframes4-blog - Tumblr blog

pictureframes4-blog · 5 years

Text

Making Picture Frames Recommendations

10x10 frame

You can find 5 effortless ways to framing.

Phase 1 - Tips on how to Minimize Mats

Including a colour border (the mat) close to your artwork enhances the image and provides a restful location involving the impression and also the photograph body. The color and dimension with the mat board needs to be resolved initially, as this can figure out the general dimensions within your photo frame. You start by calculating the exterior size of the mat.

picture frame sizes

To chop the mat utilize a good quality bevel mat cutter and ruler. You will discover a number of reducing methods to accommodate several budgets and ability levels, such as the Mat Learn Model 660 with the hobbyists, into the Mat Grasp 860B or 1060B for your keen property image framer.

Mark the borders being cut within the back again with the mat board.

Make certain the mat will cover the perimeters of your artwork, by subtracting approx. 3mm or 1/8" within the image dimensions (duration & width). Lower the mat following the instructions for your mat cutter. Attach the picture to your mat using 2 small pieces of acid free tape around the top edge only.

Action 2 - How to Cut the image Frame

How much photograph body moulding material will I need? Carefully measure the picture and mat you wish to frame. Add an extra (3mm) for "play" to ensure the picture fits easily into the finished photo body.

Add the size (L) and width (W) together, then multiply the total by 2 to give you the overall duration. You also have to allow to the mitre cuts, so multiply the width (W2) on the moulding by 10 and add this to your total.

(L W) x 2 (W2 x 10) = TOTAL

Building the 45 degree mitre lower in your framing material is most important - your joining will only be as very good as your chopping. Always utilize a good quality manual Mitre Saw... we recommend the Proman hand saw which is made in Sweden as the best within the market. Electric powered Drop Saws are not ideal for chopping small delicate picture frames.

Great Measure System helps to make measuring simple and eliminates many mistakes. Once you have slice the to start with mitre, slide the image body material along towards the required duration over the measuring scale, and set the stop. You are now ready to chop the very first 2 pieces of one's photo body. Change the settings to chop the other 2 sides of your frame.

Slicing one side for a body is straightforward.

Slicing the second side to generally be be the same as the to start with, is the hard part. With the FrameCo Ezy-Measure System you can reduce accurately every time.

Action 3 - Ways to Clamp Frames

How do you Clamp the Body? Clamping the frame tightly is essential for great joining. You can use the a Cord Clamp, or the Steel Strap Clamp to secure the image body ready for joining.

The advantage in the Strap Clamp is that you can see all the four corners of the photograph body clamped together before joining. So alignment in the corners is effortless.

All corners should match up evenly. Apply a little wood glue to all corners of the body for added strength. Carefully tension the clamp producing guaranteed that the corners are aligned then secure the clamp tightly.

You are now ready for joining.

Step 4 - How you can Join Frames

Most picture frames are joined with a V-Nail. This is the easiest method and it is what the professional photo framer uses. The FrameCo PushMaster joining tool, inserts V-Nails into the corner with the frame. Two V-Nails in each corner is usually all that is necessary.

The PushMaster can be used by hand alone on most photograph frames, or you can tap the PushMaster with a mallet if the frame is hardwood. The PushMaster can be upgraded to the BenchMaster® which will insert V-Nails into the harderst of timbers.

V-nails: How do they work?

Upon entry, the sides of the V-Nail are deflected outwards. As it pulls back into its original shape, the join is pulled together. The little curl on the edge of the V-Nail locks the nail into the grain of the timber. Glue alone is not sufficient for strong stable joints, by introducing a V-Nail you achieve a strong, tight joint. Which V-Nail size . . . You make use of a V-Nail about 1/2 the body height.

Sizes are: 7mm - 1/4", 10mm - 3/8", 12mm - 1/2", 15mm - 5/8"

Stage 5 - The way to Finish Frames

Take the empty photo body to a glass merchant and have them minimize a piece of glass for you. If you wish to cut glass yourself make use of a top quality oil filled cutter, or the Glass Cutter. Use only 2mm plain or non-reflective glass.

Fome Core is the ideal backing board as it is light weight, acid free and quick to cut. You can also use 3mm MDF or cardboard. Place the empty frame face down and insert the glass, then the matted picture and lastly the backing board.

Use the PushMaster to insert brads or flexipoints into the rear of your photo frame to hold everything in place.

Use Backing Nails for large frames or heavy items. Flexipoints are flexible and ideal for needlework or when you want to re move the picture, eg. photo frames.

To seal the artwork in the body, tape over the brads/flexipoints using a fantastic good quality backing tape. This will prevent dust or insects getting into the image.

1 note · View note